• Proceedings of the Membrane Society of Korea Conference
• /
• 1995.06a
• /
• pp.73-92
• /
• 1995

환경오염은 인간이 지구상에서 산업활동을 시작한 이래 계속되어 오고 있는 문제인데, 최근에 들어서 전세계적으로 산업화가 가속되고 또한 인구의 급격한 증가로 인하여 매우 심각한 국면을 맞이하고 있다. 환경오염은 원재료를 가공하여 인간의 일상생활에 필요한 물픔을 생산하는 전 산업 영역에서 발생하고 있는데 이러한 환경오염은 토양오염, 수질오염, 대기오염의 세 가지로 분류할 수 있다. 오늘날의 심각한 환경오염은 환경기술이라는 신조어를 만들게 되었는데, 이는 환경오염을 적게 유발시키는 생산공정을 의미하는 저오염 생산기술(clean technology)과 생성된 오염 물질을 분리 회수하는 오염물질 처리기술(cleaning technology)로 대별할 수 있다. 저오염 생산기술은 자동차의 전착공정 등에서 보듯이 오염물질을 최소한도로 배출하게 설계한 'zero discharge' 개념의 생산공정 등에서 실용화되고 있는데, 최근에는 에너지 효율을 향상시켜 궁극적으로 CO$_{2}$의 발생을 억제하려는 시도도 많은 관심을 끌고 있다. 하지만 환경기술이라고 부르는 경우 거의 대부분은 생성된 오염 물질을 처리하는 오염물질 처리기술을 의미한다.

• 한국전산유체공학회:학술대회논문집
• /
• 2010.05a
• /
• pp.201-207
• /
• 2010

In this study, we calculated arc discharges happened in high-voltage circuit breakers for understanding the complex physics and the probability of thermal breakdown. The four main parts of arc model for this virtual-reality are radiation, PTFE abaltion, Cu evaporation and turbulence. Among these important parts the turbulence model can be critical to the reliability of computation results during high-current period because the plasma flow is affected by high eat energy and mass momentum. Two kinds of turbulence model, zero-equation model and two-equation model, are applied for these calculations and are compared with the measured pressure data inside a chamber.

• Journal of computational fluids engineering
• /
• v.15 no.3
• /
• pp.9-15
• /
• 2010

In this study, we calculated arc discharges and flow characteristics driven by arcs in a thermal puffer chamber, which is one of most outstanding high-voltage interrupters, for understanding the complex physics and the probability of thermal breakdown. The four main parts of arc model for this virtual-reality are radiation, PTFE ablation, Cu evaporation, and turbulence. Among these important parts the turbulence model can be critical to the reliability of computation results during the whole arcing history because the plasma flow is affected by high heat energy and mass momentum. Two turbulence models, the Prandtl's mixing length model and the standard $k-\varepsilon$ model, are applied for these calculations and are compared with pressure-rise inside chamber and arc voltage between the contacts as well as flow characteristics near current zero.

• Proceedings of the Membrane Society of Korea Conference
• /
• 1994.10a
• /
• pp.21-23
• /
• 1994

무방류폐수처리 시스템 개발에 막분리공정이 핵심적인 기술로 자리잡고 있다. 그러나 막분리기술의 경제성을 높히고 적용범위를 확대하기 위해서는 새로운 막의 개발과 폐수처리에서 항상 문제가 되는 fouling의 원인규명 및 막세척방법의 개발이 절실히 요구되고 있다. 본 연구에서는 염료폐수처리 및 재활용을 위한 pilot 실험에의 막의 fouling 현상과 세척효과를 역삼투막인 BW-30(2540)과 Nanofiltration막인 NF-40(2540) 모듈을 사용하여 조사하였다. RO 투과수에 의한 물리적 세척법인 flushing과 화학적세척을 실시하여 투과율 회복능력을 조사하였다.

• Proceedings of the Membrane Society of Korea Conference
• /
• 1994.10a
• /
• pp.68-68
• /
• 1994

현재의 도금폐수처리는 침전옹집법에 의해 슬러지화 하여 매립되고 있으나, 이 매립물은 침출수를 방출하여 수질오염에 문제가 되고 있다. 특히 크롬폐수는 환원 침전시키고 있으나, 공기에 의한 산화로 재용출 가능성이 비교적 높다. 따라서 크롬 고금폐수를 역삼투압법에 의해 크롬이온을 농축 회수하고, 생성되는 투과수는 도금공정에 재투입하여 공해물질이 발생되지 않는 무배출 공정 (Zero-Discharge System)을 개발하는데 본 연구의 목적이 있다. 본 실험에서는 유가금속 중 크롬을 회수하기 위하여 크롬 모델폐수의 농도, pH등을 변화시키면서 연속공정으로 R.O. Cell에 의한 투과수와 막의 상태 변화등을 살펴보았으며, 크롬 실폐수를 R.O. Cell 테스트와 역삼투기기 (1-2ton/day)를 이용하여 농축수 및 투과수의 재이용에 관하여 실험하였다.

• KIEE International Transactions on Electrophysics and Applications
• /
• v.5C no.4
• /
• pp.152-154
• /
• 2005

We demonstrate a simple $CO_2$ laser by controlling firing angle of a TRIAC switch in ac power line. The power supply for our laser system switches the voltage of the AC power line (60Hz) directly. The power supply does not need elements such as a rectifier bridge, energy-storage capacitors, or a current-limiting resistor in the discharge circuit. In order to control the laser output power, the pulse repetition rate is adjusted up to 60Hz and the firing angle of TRIAC gate is varied from $45^{circ}$ to $135^{circ}$. A ZCS(Zero Crossing Switch) circuit and a PIC one-chip microprocessor are used to control the gate signal of the TRIAC precisely. The maximum laser output of 40W is obtained at a total pressure of 18 Torr, a pulse repetition rate of 60Hz, and a TRAIC gate firing angle of $90^{circ}$.

• Korea Journal of Hospital Management
• /
• v.10 no.1
• /
• pp.48-70
• /
• 2005

The purpose of this study was to make an analysis of the impact of the DRG payment system on medical care pattern and cost of cataract surgery in a general hospital. The subjects were 173 patients whose DRG severity grade was zero, selected from among the hospitalized who underwent cataract surgery before and after the joining to the demonstrational operation of the third year DRG payment system. Their medical records and the details of their medical bills were examined to find out the length of hospital stay, medical care pattern provided to them, the cost of medical care, and the quality of medical care. The length of stay and the amount of medical care supplied during being in hospital dropped significantly for both single-eye and double-eyes cataract surgery groups. The amount of antibiotic use went down during the hospitalization and upon discharge from the hospital, but decreased after discharge. The total medical bills and the rate of basic examination implementation increased in the OPD before hospitalization but after discharge dropped. For double-eyes cataract patients, the rate of double-eyes cataract surgery went down. The total medical bills of DRG payment system converted into the fee-for-service system was greater by 113.3% for the single-eye cataract surgery group and by 102.9% for the doble-eyes cataract surgery group, compared to that by the fee-for-service. The contribution shared by the insurance corporation increased for both single-eye and double-eyes cataract surgery groups, but the copayment by the insured went down. Regarding the treatment outcome, no difference was found in complication rate, resurgery rate and mortality rate before and after the joining to the DRG payment system was implemented. The use of special lens lessened significantly. The amount of medical care supplied during hospitalization decreased but the complication rate didn't increase. But the increased use of low-price artificial cataract and the avoidance of double-eyes cataract surgery was observed. The phenomenon decreased number of OPD visit and the decreased total medical bills of OPD care after discharge in this hospital required further evaluation.

• Clean Technology
• /
• v.20 no.4
• /
• pp.433-438
• /
• 2014

There is an increasing interest in the development of rechargeable batteries suitable for use in both hybrid electric vehicles and energy storage systems that require higher charge & discharge rates, bigger battery sizes and increased safety of the batteries. Spinel-type lithium titanium oxide ($Li_4Ti_5O_{12}$) as a potential anode for lithium ion batteries has many advantages. It is a zero-strain materials and it experiences no structural change during the charge/discharge precess. Thus, it has long cycle life due to its structural integrity. It also offers a stable operation voltage of approximately 1.55 V versus $Li^+/Li$, above the reduction potential of most organic electrolyte. In this study, Ru added $Li_4Ti_5O_{12}$ composites were synthesized by solid state process. The characteristics of active material were investigated with TGA-DTA, XRD, SEM and charge/discharge test. The capacity was reduced when Ru was added, however, the polarization decreased. The capacity rate of $Li_4Ti_5O_{12}$ with Ru (3%, 4%) addition was reduced during the charge/discharge precess with 10 C-rate as a high current density.

• Journal of Environmental Science International
• /
• v.2 no.2
• /
• pp.153-160
• /
• 1993

The problem of supply and transport of sediment from a mountainous catchment is very important in explaining dynamic geomorphology and the hydrological cycle. The discharge of suspended sediment is determined by a morphological system. Human interference to environment Is also an important, not negligible factor in sediment production. Moreover, growing concern in recent years for the problems of nonpoint pollution and for the transport of contaminants through terrestrial and aquatic ecosystems has highlighted the role of sediment-associated transport in fluvial systems. This study was conducted in forested and quarried catchments in order to clarify the different discharge process and the mechanism of suspended sediment dynamics for each catchment. As a forested catchment, the Yamaguchi River catchment which drains a $3.12km^2$ area was chosen. On the other hand, the Futagami River basin which is formed by three subbasins (1.07, 1.59 and $1.78km^2$), as a quarried catchment was selected. These catchments are situated to the north and east of Mt. Tsukuba, Ibaraki, Japan. The discharge pattern of suspended sediment from the Futagami River basin is more unstable and irregular than that from forested catchment, the Yamaguchi River catchment. Under the similar rainstorm conditions, suspended sediment concentration from quarried catchment during a rainstorm event increases from 43 to 27,340 mg/l. However, in the case of the forested catchment it changes only from nearly zero to 274 mg/l. Generally, the supply source of suspended sediment is classified into two areas, the in-channel and non-channel source areas. As a result of field measurements, in the case of the forested catchment the in-channel (channel bed, channel bank and channel margin) is the main source area of suspended sediment. On the other hand, remarkable sediment source area on the Quarried catchment is the non-channel that is unvegetated ground.

• 한국해양학회지
• /
• v.30 no.1
• /
• pp.13-26
• /
• 1995

In this paper three turbulence models including two-equation model by Blumberg and Mellor (1987), one-equation model with mixing length formula of Blackadar's (1962), and zero-equation model of Prandtl's (1925) were compared in homogeneous, unstratified channel flows. Steady flows which a steep-sided trapezoidal trench with uniform discharge, tidal flow and steady wind-driven flow in finite channels are considered in detail. Steady flows in a trench and tidal flows in a finite channel were reproduced fairly accurately and there was virtually no difference among results of three turbulence models. However, In case of steady wind-driven flow only two-equation model reproduced the important features of experimental data. the other two models underestimated the surface velocity. In tidal and wind-driven flows with negligibly small adjective and diffusive effects, the two-equation model gives rise to parabolic profile of eddy viscosity with maximum at the mid0depth, and the one and zero equation model based on Blackadar formula linear profile with maximum at the surface.