• 한국미생물·생명공학회지
• /
• 제25권1호
• /
• pp.51-55
• /
• 1997

To utilize the alkaline protease produced by Halomonas sp. ES-10 as an enzyme detergent, the crude enzyme was obtained by methanol precipitation and lyophilization. And it was processed to coated enzyme.The best mixing ratio of components such as coated enzyme, builders, actives, fillers and adjuvants on detergency was examined, and temperature and pH influencing detergency were also tested. Detergency test 0.15% detergent solution was carried out on EMPA test cloth #116 with shaking(90 rpm) for 10 min after 30 min of pretreatment. The detergent which contained coated-enzyme 1%, Zeolite 4A 20%, Tween 80 1. 5%, sodium borate 30%, sodium meta silicate 7.5% and water 40% showed about 90% of washing efficiency at 40$\circ $C and pH 10.0.

• 한국자동차공학회논문집
• /
• 제11권6호
• /
• pp.59-64
• /
• 2003

Recently, as people pay attention to the environmental pollution, the emissions of diesel engine have been a serious problem. We carried out the performance evaluation test of Diesel Oxidation Catalysts (DOC) for HSDI diesel engine equipped vehicles. The DOC, basically coated with Pt catalyst, was manufactured with various washcoat materials. It was found that CO conversion efficiency depends on temperature, but THC conversion efficiency is dominated by temperature and space velocity. The THC and CO conversion efficiencies of aged catalysts were increased with additions of $ZrO_2$ and zeolite B in the washcoat. We found that DOC performance changes with coating techniques, even through it has same washcoat materials. The DOC coated by high temperature washcoat coating technology showed good conversion efficiency than low temperature washcoat coated DOC.

• 한국환경과학회지
• /
• 제30권12호
• /
• pp.1041-1051
• /
• 2021

The purpose of this study was to identify for extenders, adhesives, colorants, and fungicides suitable for the production of high-quality film-coated seeds of Chinese cabbage. In addition, the effect of various additives used for film coating on the germination of coated seeds and seedling vigor was investigated to establish appropriate treatment conditions for film coating efficiency. The germination rate and germination speed in Chinese cabbage film-coated seeds did not differ significantly depending on the type and concentration of the extender, while the use of Talc resulted in superior granulation capacity and adhesion of the seed coat in comparison to Zeolite. There was no significant difference in the germination rate depending on the type of adhesive used for film coating of Chinese cabbage seeds, but the germination rate was slightly slower in the film-coated seeds using carboxymethyl cellulose as an adhesive. On the other hand, the seeds coated with a film using 1% PVA as an adhesive not only maintained hardness enough to withstand external pressure, but also showed a high germination rate. In addition, the suitable disinfectant for film coating was venoram, and the treatment concentration was good at 250 mg·L^-1. The type of colorant used in the film-coated seeds of Chinese cabbage did not significantly affect the germination rate, germination speed, and seedling vigor. The seeds film-coated using the liquid colorant were superior in appearance to the seeds film-coated with the solid colorant, which implies the possibility of reduction in the manufacturing costs by using the water-soluble paints as colorants for film-coated seeds.

• 한국지반신소재학회논문집
• /
• 제13권2호
• /
• pp.59-67
• /
• 2014

이 연구는 중금속 오염물질의 효과적인 정화를 위하여 배수재에 흡착가능한 오염물질의 양을 평가하는 것이고 배수재의 오염 물질 흡착능은 배수재 필터에 도포된 반응물질의 오염물질 흡착시험을 수행하고, 등온흡착모델과 비교하여 평가하였다. 시험에서 사용한 반응물질은 천연 제올라이트이고, 오염물질은 구리, 납, 카드뮴이다. 오염물질별로 초기농도 변화에 따른 흡착량을 Freundlich와 Langmuir흡착등온모델과 비교하였다. 배수재 표면에 도포된 반응물질 성분분석결과 Si, Al, O의 성분이 각각 약 28%, 11%, 48% 포함되어 있어 배수재 표면에 도포된 물질이 중금속(Cu, Pb, Cd) 오염물질 흡착을 위한 반응물질인 제올라이트의 성분으로 나타났다. 반응물질인 제올라이트의 중금속 흡착반응속도는 납, 구리, 카드뮴의 순으로 나타났다. 흡착물질의 성능평가 중 중요한 요소가 반응속도이고, 최대흡착량과 반응속도의 관계에서 제올라이트를 반응물질로 사용할 경우, 지반내 복합중금속의 제거 순서를 결정하는 설계 요소로 활용할 수 있다. 즉, 납은 구리에 비해 최대흡착량은 작지만 상대적으로 반응속도가 빠르므로 1차적으로 제거가 가능하며, 납의 제거 후 구리의 제거가 가능하다. 카드뮴의 경우 다른 중금속의 제거 후 마지막으로 제거가 가능한 것으로 분석되었다.

• 한국재료학회지
• /
• 제16권11호
• /
• pp.692-697
• /
• 2006

Deodorization of natural zeolites have been improved not only for polar but also for non-polar pollutants by sucessive ion exchanges of H and Ag ions starting from Korean natural zeolite with high adsorption capacity. The modified zeolites with $TiO_2$ coating on the surface revealed high deodorization and photocatalytic decomposition effects. Further modification was made with $10{\sim}20nm$ silica nano particles coating on the surface, the resulting composite particles of $SiO_2/TiO_2/modified$ natural zeolite revealed not only comparable deodorization but also better durability and resisatnce to color change compared to the $TiO_2$/modified natural zeolite without much compensation of photocatalytic decomposition effect, when the composite particles were exposed to the polypropylene non-woven fiber coated with organic binder. It is expected for the composite particle prepared here to be used as indoor building materials for indoor air quality control.

• 접착 및 계면
• /
• 제2권3호
• /
• pp.1-8
• /
• 2001

${\gamma}$-APS (${\gamma}$-aminopropyltriethoxysilane)로 표면처리된 천연제올라이트와 에폭시 수지 복합 재료의 표면 자유 에너지, 인상강도 및 계면 모폴로지에 대해 연구하였다. 표면처리하지 천연제올라이트의 표면 자유에너지 성분 중에서 무극성 성분인 Lifshitz-van der Waals 성분, ${\gamma}{\frac{LW}{SV}}$는 $19.22mJ/m^2$이었고, 극성 성분인 Lewis acid-base 성분, ${\gamma}{\frac{AB}{SV}}$는 $15.27mJ/m^2$이 있다. ${\gamma}$-APS의 처리농도가 증가함에 따라 ${\gamma}{\frac{LW}{SV}}$값은 증가하였지만 ${\gamma}{\frac{AB}{SV}}$는 감소하였으며, 이는 ${\gamma}$-APS의 소수성 성분인 알킬기의 영향이 친수성 기인 아민이나 수산기의 영향보다 커지기 때문이다. 인장강도와 Young율은 ${\gamma}$-APS 처리에 의해 개선되었으며, SEM 분석에 의해 계면특성이 향상되었음을 확인하였다.

• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2020년도 가을 학술논문 발표대회
• /
• pp.157-158
• /
• 2020

The present study examined the effectiveness of textile fabrics coated with nano-pore materials on removing the nitrogen oxide (NO_X) and sulfur oxide (SO_X) in the atmospheric environment. The tested approach is favorable for absorbing NO_X and SO_X, even under the washing condition.

• 상하수도학회지
• /
• 제31권6호
• /
• pp.521-527
• /
• 2017

Phosphorus is one of the limiting nutrients for the growth of phytoplankton and algae and is therefore one of leading causes of eutrophication. Most phosphorous in water is present in the form of phosphates. Different technologies have been applied for phosphate removal from wastewater, such as physical, chemical precipitation by using ferric, calcium or aluminum salts, biological, and adsorption. Adsorption is one of efficient method to remove phosphates in wastewater. To find the optimal media for phosphate removal, physical characteristics of media was analysed, and the phosphate removal efficiency of media (silica sand, slag, zeolite, activated carbon) was also investigated in this study. Silica sand showed highest relative density and wear rate, and phosphate removal efficiency. Silica sand removed about 36% of phosphate. To improve the phosphate removal efficiency of silica sand, Fe coating was conducted. Fe coated silica sand showed 3 times higher removal efficiency than non-coated one.

• 동력기계공학회지
• /
• 제21권3호
• /
• pp.93-101
• /
• 2017

In conventional adsorption chamber, adsorbent is embedded in between heat exchanger fins by wire mesh. This method impedes heat and mass transfer efficiency. So in this study, to improve the heat transfer performance of heat exchanger, a fin-tube exchanger was coated with FAPO (Ferroaluminophosphate) zeolite adsorbent. The fin-tube heat exchanger has a fin pitch of 1.8 mm with a variation of adsorbent coating thickness of about 0.1 mm, 0.15 mm and 0.2 mm. By varying cooling water temperature and chilled water temperature respecively, heat transfer rate and overall heat transfer coefficient were investigated. As a result, the heat transfer rate and overall heat transfer coefficient increase with decreasing cooling water temperature and increasing chilled water temperature. Under the basic conditions, the heat transfer rate of heat exchanger with 0.2 mm coating thickness is 11% and 43% higher than that of 0.1 mm and 0.15 mm, respectively. The overall heat transfer coefficient is $189.1W/m^2{\cdot}^{\circ}C$, it is two times lager than that of 0.1 mm.

• 한국작물학회지
• /
• 제65권1호
• /
• pp.30-39
• /
• 2020

벼 직파재배나 육묘에서 종자소독, 병충해방제, 시비 등에 요구되는 생산비절감기술로 개발된 기존 규산코팅볍씨(규산/Zeolite)의 단점 보완으로 신규 규산코팅기술이 개발되었다. 신규 규산코팅볍씨의 제조 및 이용특성과 육묘상자에서 건묘육성 및 벼 키다리병 경감효과를 명확하게 하기 위하여 벼 키다리병 이병성 감염종자를 소독 없이 마른 상태로 코팅한 볍씨와 중도저항성 소독된 보급종자를 마른 상태로 코팅한 볍씨를 토경조건과 수경조건에서 시험이 수행되었다. 1. 신규 규산코팅볍씨는 종자 100 g에 코팅 바인더 점액성 수용성규산 18 ml을 충분히 묻히고 거기에 Dolomite 80 g/철 5 g의 혼합분말을 고루 뿌려서 코팅되었다. 2. 신규 규산코팅볍씨의 특성은 종자무게의 1.84배이었고 중량, 코팅강도와 코팅색택 등이 기존 규산코팅볍씨보다 훨씬 개선되었다. 3. 신규 규산코팅볍씨의 묘는 무코팅볍씨에서 자란 묘의 연한 엽색과 늘어지는 초형에 비하여 짙은 엽색(SPAD치)으로 직립되었고 엽신의 규질화가 현저히 높았으며 묘소질(w/cm)은 유의하게 증가되었다. 특히 생육량과 엽색도는 토경조건에서 보다 영양이 결제된 수경조건에서 뚜렷하였다. 4. 47일간 육묘 중 벼 키다리병 발생은 파종 후 38일에 peak를 보였고 무코팅볍씨 발병률 54.2%에 비하여 신규 규산코팅에서는 68.8~70.7%의 방제가를 나타내었다. 이상을 종합하여 보면 벼농사에서 가장 많이 요구되는 규산질 비료를 Dolomite와 철분으로 종피에 코팅시켜서 만든 신규 규산코팅볍씨로 종자소독, 건묘육성 및 벼 키다리병 경감 효과 등은 친환경 저비용과 안전 쌀 생산에 크게 기여되리라 본다. 또한 장기 영양결제에도 육묘 중 뿌리 활력이나 엽의 노화 없이 정상생육이 지속되어 육묘시비량 절감 가능성도 보였고 금후 묘의 노화경감을 위한 최소 영양공급 연구가 요구되었다.