• Journal of Physiology & Pathology in Korean Medicine
• /
• v.21 no.6
• /
• pp.1431-1436
• /
• 2007

In order to optimize the extract condition and improve physiological activity of the extract form Tricholoma matsutake, experiments related to extraction methods, totale yield, content of total soluble polysaccharide, SOD-like activity, total polyphenol amount, and volatile flavor compound and the others were carried out, results were obtained as following: Compare with traditional hydrothermal extraction method (Hot water extraction : HWEW), it illustrates that the low temperature extraction method which combines a supersonic waves and microwave (Supersonic microwave extraction : SMEW) causes of increasing the total yield, total soluble polysaccharide. As to the anti-oxident effect, SMEW method leds to increasing of the SOD-like activity, total polyphenol amount as well. Also, cytotoxic effect and growth inhibitory effect against cancer cell line are much higher in SMEW method than HWEW method, especially SMEW5 extracts treated by supersonic 15 min. and microwave 120W, 3 min. and 2 times. The main volatile flavor compound and infinitesimal volatile flavor compound both increase significantly by SMEW method. It is concluded the main components of the volatile flavor compounds extracted from Tricholoma matsutake are 1-octen-3-0l, Methyl cinnamate, 2-octeno1 et al. alcohol typies. Consequently, SMEW5 method is considered as the most effective one for anti-oxidant and is prior to any other methods. And the optimun conditions of this method are : supersonic waves (supersonic, 25KHz, 50W) 15 minutes, microwave spectroscopy (microwave, 2,450MHz, 120W) 3 minutes, and every treatment is performed once followed twice repeats.

• Journal of The Korean Society of Grassland and Forage Science
• /
• v.25 no.1
• /
• pp.7-16
• /
• 2005

This experiments were carried out to determine growth characteristics, dry matter yield and voluntary intake of silage according to growth stage of Sorghum$\times$sudangrass(SSH) hybrid in mono-cropping and inter-cropping(C; com, T1; cutting of SSH at milk stage. T2; cutting of SSH at dough stage, T3; cutting of SSH at yellow ripe stage, T4; cutting of SSH and soybean at milk stage, T5; cutting of SSH and soybean at dough stage, T6: cutting of SSH and soybean at yellow ripe stage). Results obtained from these experiments are as follows; Plant length and leaf length of SSH(T2, T3, T4. T5 and T6)) were higher than C. T1 treatment was lower than it. C showed $2.3\~2.9$ times higher stem diameter as 29.5mm compare to SSH(T1, T2, T3, T4, T5 and T6). soybean(T4, T5 and T6) was lower in $4.3\~5.4$ times. But SSH of inter-cropping treatment(T4, T5 and T6) showed highly comparing with mono-cropping(T1, T2 and T3) at the same maturity. Leaf rate and stem hardness of SSH(T1, T2, T3, T4, T5 and T6) were lower than C. The fresh yield was high line with T2(72,320kg/ha), T1(69,103kg/ha), T3(68,333kg/ha) and C(57,988kg/ha), dry matter yield was high in line with T3(22.413kg/ha), T2(21,479kg/ha), C(19,252kg/ha) and T6(18,175kg/ha), (P<0.05). Protein dry matter yield was higher in T3(1,434kg/ha), C(1,386kg/ha)T5 and T6(1,345kg/ha) it was lower in T1(872kg/ha), (P<0.05). Crude protein of silage of T4 and T5 was higher than C, T2 and T3 were lower than it(P<0.05), while NDF content was not different. ADF content of T6 was higher than those of the other treatment. The highest hemi-cellulose among treatments was shown in T1 whereas T6 showed the lowest. Fresh intake of silge was 160.4, 155.8, 168.7, 172.9, 132.9, 158.7 and 185.2 g/BW for C, T1, T2, T3, T4, T5 and T6, respectively. Dry matter intake was high in line with T6(60.3g), C(153.8g), T3(53.6g), T5(47.8g), T2(46.8g), T4(35.2g) and T1(34.48g/BW), (P<0.05). Crude protein intake was high in line with T6(3.9g), T5(3.4g), C(3.4g), T2(2.9g), T3(2.9g), T4(2.6g) and T1(2.3g/BW), (P<0.05). As mentioned above the results, mono-cropping(T3) and inter-cropping(T5 and T6) could be recommended as increasing method of sorghum $\times$ sudangrass hybrid silage utilization when silage intake of dry matter and crude protein were considered.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.14 no.8
• /
• pp.4100-4105
• /
• 2013

The Peanut sprouts have been used as food for long time in many Asian countries. Among them, resveratrol have bioactivity effects as antioxidant and anticancer. In this work, resveratrol was extracted from peanut sprouts by dipping(extraction time 3h, $25^{\circ}C$) method. And extraction efficiency and amount was identified using on-line screening HPLC-ABTS. From the experimental results, it is evident that the amount of resveratrol($0.310-0.346{\mu}g/mL$) by 50% aqueous EtOH was higher than any 100% water and EtOH composition. Also, the 100% water extracts sample was low yield 2.040-2.145%. The shown results can be applied as sources for pharmaceuticals and functional material.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.41 no.1
• /
• pp.75-83
• /
• 2021

Over-urbanization has contributed to the increase in traffic problems. This makes the need for effective road planning and design more important than ever. I have been able to learn how to build a new road, and how to use it. However, in spite of the importance of good road planning, there are no systematic standards or methods for calculating traffic volume on railroad routes. Therefore, in this study, to strengthen the competitiveness of railroads, the concept of line capacity is introduced to railroads, and a clear standard and method for calculating railroad line capacity are presented. Based on the results, the line capacity of main railway lines for domestic railways was calculated. By applying the method of calculating the line capacity presented in this study, the capacity of existing railway lines and newly expanded routes can be calculated. It is expected that our findings will be able to provide systematic standards that can be applied to yield a more effective investment and design planning stage; the findings will also help improve the efficiency of railroad operation.

• Journal of Korean Society of Forest Science
• /
• v.102 no.1
• /
• pp.24-29
• /
• 2013

This study was carried out for preliminary feasibility review to investigate work efficiency of chestnut harvest using yield net and to find a way to reduce the cost for purchasing and managing yield net. To this end, we conducted a survey of 6 forest farm houses in Cheongyang, Gongju and Buyeo regions where yield nets are being used efficiently. Cost-benefit analysis based on Net Present Value and Benefit Cost Ratio was used to examine the investment profitability. While regions of Cheongyang A, Cheongyang B and Buyeo A are profitable in spite of no subsidy for purchasing yield net from the government, the regions of Gongju A, Gongju B and Buyeo B are not profitable without subsidy. When an 80% of subsidy for purchasing yield nets is provided, the forest farm houses in Cheongyang A, Cheongyang B, Buyeo A and Gongju B regions are found to be profitable while those in Gongju A and Buyeo B regions are still not profitable. We consider that the different results come from the differences in the planting method of chestnut, labor efficiency, labor skill and the orchard conditions such as slop. Finally, several efforts for government and cultivator are suggested to expand the use of yield net; planting chestnut in line, establishing installation and management methods, supporting the cost for purchasing yield net and studying detailed effects besides profitability issue.

• Journal of the Korean Society for Nondestructive Testing
• /
• v.28 no.2
• /
• pp.125-130
• /
• 2008

A spherical indentation has been proposed as a nondestructive method of measuring local residual stress field in laser-voided joints. The apparent yield strengths interpreted from the spherical indentation data of as-welded cutting wheel were compared with the intrinsic yield strengths measured at nearly equivalent locations in annealed wheel. Their difference along the distance from the welding line is welding stress distribution because the intrinsic yield strength is invariant regardless of the elastic residual stress. The spherical indentations show that the laser-welded diamond cutting wheel displays a 10 min-wide distribution of the welding residual stress and has peak compressive and tensile stresses in the shank and tip regions, respectively.

• Proceedings of the Korean Society of Crop Science Conference
• /
• 2022.10a
• /
• pp.203-203
• /
• 2022

A new winter wheat(Triticum aestivum L.) cultivar "Hwanggeumal" was developed by the NICS(National Institute of Crop Science), RDA(Rular Dvelopment Administraion) in 2019. It was derived from a cross of the "Jokyoung//Kauz/Rayon" and "Jopoom" in 2008. It had advanced generation through bulk and pedigree method for seven years and designated line name "Jeonju398" after AYT(Advance Yield Trial) test for two years. And "Hwangeumal" was designated variety name after RYT(Regional Yield Trial) test in eight locations around Korea for two years from 2018 to 2019. Its heading date was April 19 and maturity date was May 31, which were similar to Jokyoung. "Hwanggeumal" had shorter plant height(75 cm) and spike length(7.1 cm), spikes per m²(699) and lower 1,000 grain weight(44.2 g) than "Jokyoung"(78 cm, 8.2 cm, 776, 46.6 g, respectively). "Hwanggeumal" was showed weak to winter hardiness and susceptible to powdery mildew but tolerance to PHS(Pre-harvest sprouting). The average grain yield in the AYT was 6.2 ton/ha, which were 10% more than "Jokyoung" And in the RYT was 5.1 ton/ha in upland and 4.4 ton/ha in paddy field, which were lower than "Jokyoung", respectively. "Hwanggeumal"s flour yield (71.4%) and flour lightness (91.82) showed similar to "Jokyung" and higher protein content (14.0%) and gluten content (10.3%) and SDS-sedimentation volume (60.3ml). These result showed that the "Hwanggeumal" dough strength of flour is strong than "Jokyung". "Hwanggeumal"s HMW-GS(High molecular weight gluten subunits) composition are Glu-D1 (5+10), Granule-bound starch synthase(GBSS) composition are Wx-A1 (a), Wx-B1 (b), Wx-D1 (a) and composition of Puroindolines are Pina-D1(a), Pinb-D1(b).

• Journal of Korean Society of Steel Construction
• /
• v.17 no.5 s.78
• /
• pp.581-591
• /
• 2005

This paper proposes a design formulae that evaluates the design strength of T-joints made of cold-formed square hollow steel sections with longitudinal branch plate. The T-joints had a configuration that a branch member used to longitudinal plate to the main chord in the plane. This study focused on the branch plate T-joints governed by the main chord flange failure mode among the experimental results. Based on the test results of the longitudinal branch plate T-joint in the square hollow sections, the ultimate strength on the T-joints was defined as 1.5 times the load at 1% B the strength of joints that governed the serviceability in control for $16.7{\leq}2\gamma(B/T){\leq}31.3$ and $0.20{\leq}{\beta}(b1/B){\leq}0.75$. Existing yield line models for normal T-joints were investigated to be the main chord flange failure for the branch plate T-joint, and this proposal design formula was based on the theory of the yield line model. Finally, the value of the finite element method compared with the value of the test and theory for the T-joints verified the validity of the design formulae.

• Proceedings of the KIEE Conference
• /
• 2007.04c
• /
• pp.150-152
• /
• 2007

The stator faults yield asymmetrical operation of induction machines, such as irregular current, torque pulsation, increased losses and decreased average torque. So it is necessary to detect the stator faults and develope the monitoring system for detecting faults including vibration and noise. This paper describes the method to analysis the induction motors with the stator winding inter-turn short for investigation of the asymmetrical operation during normal and transient states. And a simple method is used for the simulation and analysis of the induction machines with stator asymmetries. Finally, simulation results, finite element analysis and experimental ones are presented. The results can be useful for real-time on-line monitoring of an induction motor.

• 전기의세계
• /
• v.27 no.5
• /
• pp.69-75
• /
• 1978

3 phase induction motor applied in the method of connecting it directly across the line needs large current when it starts. At that time, leakage magnetic pathes of interior of the motor are severely saturated and leakage reactances are decreased because of saturation. Consequently, increased current and raised powerfactor yield increase of starting torque. The author, noticing those phenomena, derived experimentally the raion of decreasing leakage reactance from the fact that when voltage applied to motor is increased under locked condition the magnitude of current and phase angle are varied, and determined tha equations of starting current and starting torque, considering the decrease of leakage reactance by the large starting current. The author calculated the characteristics of Current-Time and Speed-Time with the determined equation at specific load conditions, and compared the values obtained from above calculations with those from circle diagram's method and the practically recorded values at same load conditions. Therefore, the authos got a confidience that the results of the derived theory coincide with the practically measured values more well than circle diagram's results and circle diagram's equation should be modified in order to analize the starting status of a induction motor.