• Journal of Korean Society of Forest Science
• /
• v.6 no.1
• /
• pp.32-36
• /
• 1967

The stand table need to replenish the yield table. It is the distibution of trees in D.B.H. class. Therefore this table was made of sample which was collected to prepared the yield table. The stand table for 6-26 cm was prepared to 2cm interval by method of alinement charts.

• Journal of Korean Society of Forest Science
• /
• v.98 no.6
• /
• pp.646-651
• /
• 2009

In this study, it was intended to prepare a stem volume table (with or without bark) and a stand yield table for Juglans mandshurica, plantations in Chungju, located in Chungcheongbuk-do, Korea. For the calculation of stem volume, we applied Kozak's growth model, which showed the best fitness index (97%). With this model, it was able to prepare the first yield table for Juglans mandshurica in Korea. Site index model, an indicator of forest productivity, was derived by using the Chapman-Richard model, in which the basic stand age was set to 30 years. The resulted site index ranged between 16 and 22. Based on the yield table of Juglans mandshurica resulted from this study, the volume for a 70-year-old stand with a midium site index class was estimated to be $238m^3/ha$, which is $100m^3/ha$ higher than the volume estimated from the yield table of Quercus acutissima. The yield table of oak trees has been used in the estimation of most broadleaf stands in Korea. However, the result of this study indicated that it is necessary to generate a stand yield table for each broadleaf species. The annual $CO_2$ removals of 30-year-old Juglans mandshurica plantations in the ChungJu region was estimated to be $5.84tCO_2/ha$. The stem volume and stand yield table of Juglans mandshurica plantation resulted from this study would provide a good information in decision making for forest management in ChungJu region.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.42 no.3
• /
• pp.367-372
• /
• 1997

Excessive water stress is one of major limiting factors affecting soybean yield, especially when soybean is grown in converted upland from paddy field. The present study was undertaken to know the genotypic variation in yield response of soybean to different environments in combination with soil texture and underground water table depth. Eight recommended soybean varieties in Korea and two supernodulating soybean mutants introduced from USA were planted in the lysimeter which was filled with two different soil types(sandy loam and clay loam). Of three underground water table depths(10, 30, and 50 cm) during whole growth stage, the lowest 10 cm was included to create excessive water stress. Yield was significantly different according to the underground water table depth and soybean genotypes, whereas soil type did not affect yield. There were significant interaction effects of soybean yield among soil type, soybean genotype, and underground water table depth. Yield of nts 1116 showed the highest across environments. Based on the regression analysis, the most stable variety was Sobaeknamulkong(bi=1.09). Jangsukong was fairly stable and high in yield, when compared to other soybean genotypes. However, nts 1116 was the most desirable ($D_i=228$) mainly due to the highest yield rather than the greater stability over environments. Multiple regression analysis revealed that shoot dry weight and nodule number were major factors affecting yield in the combined data over three water table depths and two soil types.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.40 no.2
• /
• pp.195-202
• /
• 1995

This experiment was performed to characterize the optimum water table level for the growth and yield of barley(var. Olbori) and wheat(var, Grumil), Olbori and Grumil were grown in the 550 liter plastic pot filled with silt loam or sandy loam, During the whole growth period, the water table adjusted to be 20, 30, 40, 50, and 70cm, Higher water table was resulted in the decrease in plant height and top dry weight, but in the increase of the ratio of top to root dry weight, especially in barley, This suggested that high water table level affected more the growth of top than that of root, The number and area of green leaves were decreased as the water table was higher than 30 to 40cm at the late growth period(May 18, 1993), The largest number and area of green leaves were shown at 50cm of water table in sandy loam and at 70cm in silt loam, As the water table was high, the leaf chlorophyll content was low, And barley was affected more significantly than wheat by soil texture, The photosynthetic activity was decreased remarkably at 20cm water table, Heading period was 2 to 3 and 4 days earlier at the 20cm water table of sandy loam in barley and wheat, respectively, However this earlier heading was not shown in silt loam, Grain filling was accelerated 5 to 7 days earlier in barley and 10 days in wheat grown at 20cm water table, The highest yield was present at 50 and 70cm water table, The yield was decreased remarkably at 20cm water table, resulting that yield reduction ratio of barley was 71.1% and 72, 2%, and that of wheat was 41.0% and 60, 0% in sandy loam and silt loam, respectively, High water table decreased the number of spike per unit area, but increased the seed weight per spike in barley, However, High water table reduced the seed weight per spike in wheat. There was significant correlation between yield and leaf chlorophyll content in wheat and barley, Yield was correlated significantly with green leaf area in barley, and with top dry weight, ratio of top to root dry weight chlorophyll content and photosynthetic activity in wheat. The optimum water table was 50 to 70cm in wheat and barley, They grew fairly well at 30cm water table of sandy loam, and at 40cm of silt loam.

• Structural Engineering and Mechanics
• /
• v.17 no.2
• /
• pp.187-201
• /
• 2004

A shaking table test on a three-story one-bay steel frame model with metallic yield dampers and their parallel connection with oil dampers is carried out to study the dynamic characteristics and seismic performance of the energy dissipation system. It is found from the test that the combined energy dissipation system has favorable reducing vibration effects on structural displacement, and the structural peak acceleration can not evidently be reduced under small intensity seismic excitations, but in most cases the vibration reduction effect is very good under large intensity seismic excitations. Test results also show that stiffness of the energy dissipation devices should match their damping. Dynamic analysis method and mechanics models of these two dampers are proposed. In the analysis method, the force-displacement relationship of the metallic yield damper is represented by an elastic perfectly plastic model, and the behavior of the oil damper is simulated by a velocity and displacement relative model in which the contributions of the oil damper to the damping force and stiffness of the system are considered. Validity of the analytical model and the method is verified through comparison between the results of the shaking table test and numerical analysis.

• Journal of Korean Society of Forest Science
• /
• v.109 no.4
• /
• pp.477-483
• /
• 2020

We constructed a stand yield table for Chamaecyparis obtusa based on data from an actual forest. The previous stand yield table had a number of disadvantages because it was based on actual forest information. In the present study we used data from more than 200 sampling plots in a stand of Chamaecyparis obtusa. The analysis included theestimation, recovery and prediction of the distribution of values for diameter at breast height (DBH), and the result is a valuable process for the preparation ofstand yield tables. The DBH distribution model uses a Weibull function, and the site index (base age: 30 years), the standard for assessing forest productivity, was derived using the Chapman-Richards formula. Several estimation formulas for the preparation of the stand yield table were considered for the fitness index, and the optimal formula was chosen. The analysis shows that the site index is in the range of 10 to 18 in the Chamaecyparis obtusa stand. The estimated stand volume of each sample plot was found to have an accuracy of 62%. According to the residuals analysis, the stands showed even distribution around zero, which indicates that the results are useful in the field. Comparing the table constructed in this study to the existing stand yield table, we found that our table yielded comparatively higher values for growth. This is probably because the existing analysis data used a small amount of research data that did not properly reflect. We hope that the stand yield table of Chamaecyparis obtusa, a representative species of southern regions, will be widely used for forest management. As these forests stabilize and growth progresses, we plan to construct an additional yield table applicable to the production of developed stands.

• Resources Recycling
• /
• v.10 no.6
• /
• pp.35-42
• /
• 2001

A study was conducted in order to remove Poly vinyl chloride (PVC) from granular plastic mixture by using Air Table. The motion of plastic particle on Air Table was investigated, and separation test on the plastic mixture with the mixing ratio of PVC 10% and PE 90% was conducted. At the optimum condition obtained from this study, that is frequency of 9.2Hz, air velocity of 1.05 m/sec, End-slope of $7.5 ^{\circ}$, Side-slope of $1^{\circ}$, Feeding speed of 450 g/min, etc., we could separate the PE-PVC mixture to PE (99.96% grade and 98.9% yield) and PVC (88.7% grade and 99.6% yield).

• Journal of Environmental Science International
• /
• v.24 no.4
• /
• pp.461-470
• /
• 2015

As hydrogeologic parameters such as hydraulic conductivity and specific yield are estimated by aquifer test, these are dependent on specific points at which field test was conducted. To overcome these site-specific limitations, a method of estimating transmissivity of aquifer using distribution features for parameters in Water table fluctuation model is newly suggested. Distribution features in reaction factor, specific yield and transmissivity having the function of pore space in aquifer are used to derive empirical equation for estimating transmissivity. From the result for applying the equation for 10 groundwater stations in Northeast Jeju Island, this equation is available for estimating transmissivity compared to the value estimated by existing equations. The estimated transmissivity ranged from 14.2 to $3,716.9m^2/day$, and its average was $821.8m^2/day$.

• Journal of Environmental Science International
• /
• v.23 no.4
• /
• pp.615-623
• /
• 2014

The groundwater level varies according to the characteristics and composite materials of aquifer. In this study, specific yield and reaction factor which are the major two hydrogeological parameters in the WTF(Water Table Fluctuation) method were estimated and analyzed spatial characteristics. 8 groundwater level stations which have enough measuring period and high correlation with rainfall in the Hancheon watershed were used. The results showed that specific yield was randomly distributed and reaction factor showed inverse trend with altitude. If the enough data were collected, reaction factor according to altitude in ungauged points could be estimated by using these parameter characteristics.

• Resources Recycling
• /
• v.11 no.1
• /
• pp.37-42
• /
• 2002

This study was conducted in order to remove Poly vinyl chloride(PVC) from the waste plastic film mixture. The fittings of Air Table was modified to increase the separation efficiency of PVC and PE(poly ethylene). PE and PVC was successfully separated from PVC-PE film mixture with the yield of PE 90% or more and with his grade of 99% or more, using the improved Air Table. The details of the separation condition and results will be discussed in this paper. Dry separation, Waste plastic film, PVC, Air Table. The details of the separation condition and results will be discussed in this paper.