• Journal of Ocean Engineering and Technology
• /
• v.8 no.1
• /
• pp.114-122
• /
• 1994

X-ray stress constant, K, was determined for the diffraction line of (211)plane by using Cr-K$\alpha$ radiation. K was -340.87 MPa/deg. Fatigue crack propagation tests of SS41 steel were conducted under stress ratios of 0.1, 0.3 and 0.5. The half-value breadth of X-ray diffraction profile was measured at and beneath the fracture surface. The half-value breadth, B, on the fracture surface was found to increase with increasing $K_max$. The value of B was influenced by stress ratio in SS41 steel. The half-value breadth took the maximum value at the borden of reversed plastic zone, while it approached to the initial (pre-fatigue) value near the boundary of monotonic plastic zone. The maximum depth of the plasticzone was evaluated on the basis of the half-value breadth distribution. The depth $\omega$$_y$ is related to $K_max$by the following equation : $\omega$$_y$ = $\alpha$($K_max$/$\sigma$$_y$$)^2$ where .sigma.$\sigma$$_y$ is the yield strength obtength obtained in tension test .alpha.is 0.136 for SS41 steel.

• Microbiology and Biotechnology Letters
• /
• v.10 no.2
• /
• pp.155-162
• /
• 1982

A cell-recycled continuous fermentation process was studied to produce ethanol from molasses using Sacchoromyces uvarum ATCC26602 at 35 $^{\circ}C$. The fermentation system was divided into two stages in order to reduce the inhibitions of ethanol and substrate for cell growth and fermentation rate. The first reactor was aerated at the rate of 0.12 vvm whilst the second was kept anaerobic. In medium composition studies, it was revealed that inorganic nutrient supplement to the diluted molasses with 14% fermentable sugar was not needed for the fermentation, however, phosphate limitation was observed when cell propagation was contemplated. By using the cell-recycled continuous fermentation system, 14.5 hour was required to produce 8.4-9.0% (v/v) of ethanol from diluted molasses containing 14% of fermentable sugar. The ethanol productivity was 6.2g/$\ell$hr with the yield of 88.1-94.4% to the theoretical value.

• Computers and Concrete
• /
• v.11 no.1
• /
• pp.39-49
• /
• 2013

The use of ground fly ash in concrete can increase the risk of slump loss due to the drastic surface change of the particles after the grinding treatment and the accelerated reaction compared to the untreated ash. This study is aimed at the early age hydration and time-dependent rheology changes of cement paste containing ground fly ash. An original fly ash is ground into different fineness and the hydration of cement paste containing the ground fly ash is monitored with the ultrasound propagation method. The zeta potentials of the solid particles are measured and the changes of rheological parameters of the cement pastes with time are analyzed with a rheometer. A particle packing model is used to probe packing of the solid particles. The results show that the early age hydration of the paste is strongly promoted by replacing Portland cement with fly ash up to 30 percent (by mass), causing increase of the yield stress of the paste. The viscosity of a paste containing ground fly ash is lower than that containing the untreated ash, which is explained by the denser packing of the solid particles.

• Korean Journal of Materials Research
• /
• v.23 no.8
• /
• pp.423-429
• /
• 2013

Recently, steel structures have increasingly been required to have sufficient deformability because they are subjected to progressive or abrupt displacement arising from structure loading itself, earthquake, and ground movement in their service environment. In this study, high-strength low-carbon bainitic steel specimens with enhanced deformability were fabricated by varying thermo-mechanical control process conditions consisting of controlled rolling and accelerated cooling, and then tensile and Charpy V-notch impact tests were conducted to investigate the correlation between microstructure and mechanical properties such as strength, deformability, and low-temperature toughness. Low-temperature transformation phases, i.e. granular bainite (GB), degenerate upper bainite(DUB), lower bainite(LB) and lath martensite(LM), together with fine polygonal ferrite(PF) were well developed, and the microstructural evolution was more critically affected by start and finish cooling temperatures than by finish rolling temperature. The steel specimens start-cooled at higher temperature had the best combination of strength and deformability because of the appropriate mixture of fine PF and low-temperature transformation phases such as GB, DUB, and LB/LM. On the other hand, the steel specimens start-cooled at lower temperature and finish-cooled at higher temperature exhibited a good low-temperature toughness because the interphase boundaries between the low-temperature transformation phases and/or PF act as beneficial barriers to cleavage crack propagation.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.27 no.6
• /
• pp.960-968
• /
• 2003

The objective of this study is to investigate the effect of AE activities in the crack opening and closure during the fatigue test. The laboratory experiments for various materials and test conditions were carrie out to identify AE characteristics of fatigue crack propagation. Compact tension specimens of SWS 490B and Al 7075-T6 alloy were prepared for fatigue test. AE activities were analyzed based on the phase of the loading cycle. In case of SWS 490B, the most of AE was generated when the crack began opening and the crack closed fully, whereas a few in the full opening of the crack. On the other hand, in case of Al 7075-T6, a distinct AE activity was observed during crack opening process. AE activity in the peak loading of cycle was different with each specimen. However, in the same material, AE activity was not affected by the change of cyclic frequency (0.1, 0.2, 1.0 ㎐). It was found that AE activities during crack opening and closure depend on material properties such as micro-structure, yield strength and elongation.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2011.05a
• /
• pp.282-286
• /
• 2011

토양침식 및 유사유출로 인한 피해를 예방하고 대응방안을 수립하기 위해서는 침식의 발생원인과 규모에 대한 정량적 평가가 필요하다. 이를 위해서는 지속적인 계측에 의한 토양침식량 산정이 가장 바람직하지만 실질적으로 유역규모의 지속적인 모니터링은 불가능하므로 유역의 수문/지형/지질학적 특성을 고려한 수치모형을 사용하여 토양침식량 및 유사유출량을 산정하는 것이 일반적이다. 이러한 수치모형을 이용한 수문모의의 경우 모형의 구조, 모델링에 사용되는 자료, 매개변수 등에 포함된 다양한 불확실성 요인에 의해 계산결과에 상당한 불확실성을 포함하고 있다. 본 연구에서는 매개변수의 불확실성 전이에 따른 수문모의결과의 불확실성의 정량적인 평가를 위해 서로 다른 두가지 수문량(유출량, 유사유출량)을 제공하는 강우-유사-유출 모형을 선택하고, 다중최적화기법인 MOSCEM-UA을 이용하여 매개변수 상호작용에 의한 Pareto 최적해 군 및 균형최적해를 산정하고, 이에 따른 수문예측결과의 불확실성을 평가하였다.

• Korean Journal of Medicinal Crop Science
• /
• v.21 no.2
• /
• pp.142-147
• /
• 2013

Gastrodia elata has been cultivated as an important medicinal resources to treat various human diseases. One of the major problems associated with its field production is the degeneration of seed tubers, which is mainly caused by soil-borne pathogens. This study was conducted to produce disease-free seed tubers by the development of in vitro micropropagation method. First, tubers of G. elata were treated with $HgCl_2$ prior to culturing in vitro. Among various culture medium tested, water agar (WA) and WPM medium were the most effective on the induction and growth of vegetative stems. NAA ($0.1mg/{\ell}$) or TDZ ($1.0mg/{\ell}$) in WA medium showed better growth of vegetative stems compared to other plant hormones. Finally the induction and growth of vegetative stems were better in the dark compared to the light condition. In this study, we established an in vitro micropropagation system of G. elata, which might be an efficient way to increase the yield and quality of G. elata tubers in the field production.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.29 no.5A
• /
• pp.492-501
• /
• 2004

The performance of mobile communication systems depends on the state of the time-varying multi-path fading channel. To effectively prevent the corruption of video stream and its propagation in spatial and temporal domain, proactive error controls are widely being deployed. Among possible candidates, the rate compatible punctured convolutional (RCPC) code has been widely used for multimedia data, since its rate can be determined flexibly. In this paper, the adaptive channel estimation and the adaptive error correction techniques over the time-varying mobile channel have been proposed. Extensive computer simulations show that the proposed techniques yield the superior performance than the fixed rate system.

• Journal of the Korean Society for Heat Treatment
• /
• v.14 no.4
• /
• pp.212-219
• /
• 2001

The fatigue test was carried out to evaluate the fatigue characteristics of fire resistance steel for frame structure and heat affected zone (HAZ) by the one side Gas Metal Arc Welding (GMAW). In this paper, the fatigue crack growth behavior was investigated with the compact tension specimen of base metal and the HAZ according to chemical composition and rolling end temperature, respectively. And the acoustic emission signals obtained from the fatigue test were analyzed by the time-frequency analysis method as a nondestructive evaluation. Main results obtained are summarized as follows; The hardness was appeared softening phenomenon that weld metal and HAZ are lower than that of base metal. Fatigue life of welded specimen was longer than that of base metal. m was 3~4.5 in base metal and 3.8~5.8 in HAZ. The main frequency range of acoustic emission signal analyzed from time-frequency method is different with the range by noise and crack. Also, it could be classified that it was also generated by fracture mechanics of dimple, inclusion etc.

• Journal of Microbiology and Biotechnology
• /
• v.12 no.4
• /
• pp.687-691
• /
• 2002

To enhance the production of flavonoids [baicalin, wogonin-7-Ο-glucuronic acid (GA)], which are secondary metabolites of Scutellaria baicalensis Georgi(G.) plant cells, a multilayer perceptron control system was applied to regulate the substrate feeding in a fed-batch cultivation. The optimal profile for the substrate feeding rate in a fed-batch culture of S. baicalensis G. was determined by simulating a kinetic model using a genetic algorithm. Process variable profiles were then prepared for the construction of a multilayer perceptron controller that included massive parallelism, trainability, and fault tolerance. An error back-propagation algorithm was applied to train the multiplayer perceptron. The experimental results showed that neurocontrol incorporated with a genetic algorithm improved the flavonoid production compared with a simple fuzzy logic control system. Furthermore, the specific production yield and flavonoid productivity also increased.