• 한국기계가공학회지
• /
• 제20권7호
• /
• pp.33-40
• /
• 2021

Current industrial flow is directed toward reducing the usage of raw materials by reusing parts, which is referred to as a circular economy (CE). Repair is one of the most value-added approaches in CE, which can be efficiently accomplished via additive manufacturing. The repair technology of metallic parts via the directed energy deposition process, which includes the selective removal and redeposition of damaged regions of metallic parts. Residual stress characteristics depend on the shape of the part and the shape of the redeposition region. The objective of this study is to investigate the effects of the radius and corner position of the substrate on the residual stresses for repair by using finite element analysis (FEA). The residual stress distribution of the 45° angle groove at the edge of the circular shape models on the outer and inner radii was analytically investigated. The analysis was accomplished using SYSWELD software by applying a moving heat source with defined material properties and cooling conditions integrated into the FEA model. The results showed a similar pattern of concentrated stress distribution for all models except the 40-mm and 60-mm radii, for which the maximum stress locations were different. The maximum residual stresses are high but lower than the yield strength, suggesting the absence of cracks and fractures due to residual stresses.

• Smart Structures and Systems
• /
• 제30권1호
• /
• pp.75-88
• /
• 2022

Engineering structures in operation essentially belong to time-varying or nonlinear structures and the resultant response signals are usually non-stationary. For such time-varying structures, it is of great importance to extract time-dependent dynamic parameters from non-stationary response signals, which benefits structural health monitoring, safety assessment and vibration control. However, various traditional signal processing methods are unable to extract the embedded meaningful information. As a newly developed technique, variational mode decomposition (VMD) shows its superiority on signal decomposition, however, it still suffers two main problems. The foremost problem is that the number of modal components is required to be defined in advance. Another problem needs to be addressed is that VMD cannot effectively separate non-stationary signals composed of closely spaced or overlapped modes. As such, a new method named generalized adaptive variational modal decomposition (GAVMD) is proposed. In this new method, the number of component signals is adaptively estimated by an index of mean frequency, while the generalized demodulation algorithm is introduced to yield a generalized VMD that can decompose mode overlapped signals successfully. After that, synchrosqueezing wavelet transform (SWT) is applied to extract instantaneous frequencies (IFs) of the decomposed mono-component signals. To verify the validity and accuracy of the proposed method, three numerical examples and a steel cable with time-varying tension force are investigated. The results demonstrate that the proposed GAVMD method can decompose the multi-component signal with overlapped modes well and its combination with SWT enables a successful IF extraction of each individual component.

• 한국전산구조공학회논문집
• /
• 제35권1호
• /
• pp.1-8
• /
• 2022

본 연구에서는 토양-탄체 간 분리 및 재접촉을 고려한 IFL 기반 침투해석 기술을 개발하고 이를 기존 문헌의 실험결과와 비교하는 연구를 수행했다. 탄체를 강체로 가정한 후, 토양 내로 침투 시 발생하는 구형공동팽창 현상을 고려함으로써 탄체의 궤적을 예측할 수 있다. 토양에 대한 저항함수는 Mohr-Coulomb 항복 모델을 활용했으며, 입사각 혹은 AOA에 따른 J-hook 현상을 모사할 수 있다. 기존 문헌에서의 실험결과(총 6회)와의 비교 결과, 수치해석으로부터 예측한 탄체의 침투 깊이는 실험대비 약 13.4%의 평균오차를 나타냈다. 일반적으로 탄체의 침투 경로를 예측하기 위해 유한요소법이 널리 활용된다. 하지만, 유한요소법 활용 시, 탄체의 모델링을 위해 많은 시간과 노력이 필요하며, 해석 수행을 위해 수 시간이 소요된다. 본 연구를 통해 개발한 모델을 활용할 시, 탄체의 치수 입력만 필요하며 해석 시간도 수 초 이내이다.

• 한국축산식품학회지
• /
• 제43권2호
• /
• pp.245-268
• /
• 2023

The effects of phosphate alternatives on meat quality in marinated chicken were investigated with the application of chilling and freezing. Breast muscles were injected with solution of the green weight containing 1.5% NaCl and 2% sodium tripolyphosphate (STPP) or phosphate alternatives. Treatment variables consisted of no phosphate [control (-)], 0.3% sodium tripolyphosphate [control (+)], 0.3% prune juice (PJ), 0.3% oyster shell, 0.3% nano-oyster shell, and 0.3% yeast and lemon extract (YLE) powder. One-third of the meat samples were stored at 4℃ for 1 d, and the rest of the meats were kept at -18℃ for 7 d. In chilled meat, a lower drip loss was noted for control (+) and YLE, whereas higher cooking yield in YLE compared to all tested groups. Compared with control (+), the other treatments except PJ showed higher pH, water holding capacity, moisture content, lower thawing and cooking loss, and shear force. Natural phosphate alternatives except for PJ, improved the CIE L^* compared to control (-), and upregulated total protein solubility. However, phosphate alternatives showed similar or higher oxidative stability and impedance measurement compared to control (+), and an extensive effect on myofibrillar fragmentation index. A limited effect was observed for C^*, h°, and free amino acids in treated meat. Eventually, the texture profile attributes in cooked of phosphate alternatives improved except for PJ. The results indicate the high potential use of natural additives could be promising and effective methods for replacing synthetic phosphate in chilled and frozen chicken with quality enhancement.

• 열처리공학회지
• /
• 제36권2호
• /
• pp.77-85
• /
• 2023

In this study, the mechanical properties of the Al-Mg-X (X=Cr, Si) alloy, which clearly showed the influence of the specimen and grain size, were investigated by changing the specimen size extensively. In addition, the effect on the specimen size, grain size and aging condition on the mechanical properties of the grain refining alloy according to the addition of Cr was clarified, and the relationship between these factors was studied. As the specimen size decreased, the yield stress decreased and the fracture elongation increased. This change was evident in alloys with coarse grain sizes. Through FEM analysis, it was confirmed that the plastic deformation was localized in the parallel part of specimen S2. Therefore, when designing a tensile specimen of plate material, the W/L balance should be considered along with the radius of curvature of the shoulder. In the case of under-aged materials of alloys with coarse grain size, the fracture pattern changed from intergranular fracture to transgranular fracture as W/d decreased, and δ increased. This is due to the decrease in the binding force between grains due to the decrease in W. In the specimen with W/d > 40 or more, intergranular fracture occurred, and local elongation did not appear. Under-aged materials of alloys with fine grain size always had transgranular fracture over a wide range of W/d = 70~400. As W/d decreased, δ increased, but the change was not as large as that of alloys with coarse grain sizes. Compared to the under-aged material, the peak-aged material did not show significant dependence on the specimen size of σ_0.2 and δ.

• 열처리공학회지
• /
• 제36권1호
• /
• pp.22-32
• /
• 2023

In general, when scrap is dissolved in an electric arc furnace, the amount of electric furnace steel dust (EAFD) generated is about 1.5% of the scrap charge amount, and the electric furnace steel dust collected by the bag filter is charged into the Rotary Kiln or Rotary Hearth Furnace (RHF), and the zinc component is recovered as crude zinc oxide, at which time a clinker of Fe-Base is generated. In this research, first, for the efficient resource conversion of electric furnace steel dust, a reduction and roasting experiment was conducted and the reaction kinetics was examined. As a result of the experiment, it was observed that the reduction and roasting reaction was actively conducted in the range of 1100~1150℃, and melting occurred in the range of 1250℃. In the past, this clinker was widely used as a roadbed material for road construction and an Fe-Source for cement production, but in recent years, it has been mainly reclaimed due to strengthening environmental standards. However, landfill treatment is by no means a desirable treatment method due to environmental pollution caused by leachate, expensive landfill costs, and waste of Fe resources. Therefore, in order to more actively recycle the Fe component in the clinker, first of all the clinker was pulverized into an optimal particle size, and anthracite and binder (starch) were added to the magnetic material obtained by specific gravity and magnetic separation for briquet. As a experimental results, it was possible to efficiently separate clinker as Fe component and other slag component by specific gravity and magnetic force. As a results of loading and dissolving the manufactured briquet clinker in an electric arc furnace, it was observed that the unit of power and production yield were clearly improved and the carbon addition effect in molten metal was also somewhat.

• 한국지반환경공학회 논문집
• /
• 제25권6호
• /
• pp.13-17
• /
• 2024

현재 국내외적으로 토사사면의 사면안정을 위해 사용하고 있는 일반 Soil Nailing은 지반을 천공 후 단일 철근을 활용, 그라우팅하여 일종의 중력식 옹벽을 형성하여 사면의 안정을 도모하고 있다. 이러한 공법을 공사비 절감과 시공의 용이성, 상대적인 강도와 변위면에서 우수한 효율을 낼 수 있는 공법이다. 동일한 공종으로 진행하되 단일 철근을 다발철근으로 변경하여 활용할 경우 항복 인발력에 대한 그라우팅과 철근의 부착력 차이, 동일한 인발저항 대비 변형량의 차이를 현장시험을 통해 분석하여 공학적 우수성을 규명하고 공사비 측면에서 강도정수가 동일한 지반에 대하여 저항력이 동일하게 적용할 경우, 천공수의 차이와 재료비 등 전체 공사비에 미치는 영향분석을 통해 절감효과의 비교를 분석하여 평가하였다.

• 한국구조물진단유지관리공학회 논문집
• /
• 제12권1호
• /
• pp.158-166
• /
• 2008

프리스트레스하중이 작용되는 강합성교인 PSSC 교량에서 프리스트레스의 효과와 단면의 변형에 따른 텐돈의 변형의 영향을 밝히기 위해 사하중 및 활하중이 작용될 때 합성전 후에 발생하는 부재내의 변형도 및 응력변화와 허용응력 한계상태, 항복응력 한계상태 및 강도한계상태의 단면력과 부재내의 변형도 및 응력변화를 구한다. 또한 거더의 처짐 및 응력과 휨강도를 변수로 하는 한계상태들을 가정하고 이에 대한 신뢰도 분석을 수행한다. 허용응력에 맞추어 설계한 예제 단면의 응력에 대한 신뢰도 지수가 0 부근임에 비하여, 처짐 및 휨강도에 대한 신뢰도 지수는 높은 값을 주고 있어서 도로교설계기준의 허용응력에 대하여 설계한 PSSC 거더는 처짐 및 휨강도에 대하여 높은 신뢰도를 얻을 수 있음을 알 수 있다.

• 한국구조물진단유지관리공학회 논문집
• /
• 제12권6호
• /
• pp.214-224
• /
• 2008

프리스트레스하중이 작용되는 강합성교인 PSSC 교량에서 프리스트레스의 효과와 단면의 변형에 따른 텐던의 변형의 영향을 밝히기 위해 교량지간 25m~45m의 최적화된 표준단면에 대해 고정하중 및 활하중이 작용될 때 합성전 후에 발생하는 부재내의 변형도 및 응력변화와 허용응력 한계상태, 항복응력 한계상태 및 강도한계상태의 단면력과 부재내의 변형도 및 응력변화를 구한다. 또한 거더의 처짐 및 응력과 휨강도를 변수로 하는 한계상태들을 가정하고 이에 대한 신뢰도 분석을 수행하였다. 표준 PSSC 교량의 경우 하중 및 저항계수를 적용하여 설계하는 미국 설계기준의 목표신뢰도지수 값이 3.5 임과 비교하면, 허용응력을 기준으로 설계한 단면은 강도에 대하여 상당히 높은 수준의 신뢰도지수를 보임을 알 수 있다.

• 한국구조물진단유지관리공학회 논문집
• /
• 제12권4호
• /
• pp.79-86
• /
• 2008

본 연구의 목적은 RC 전단벽의 구조성능 개선을 위한 보강방법을 연구하는 것이다. 이를 위하여 형상비가 2.2인 4개의 RC 전단벽 실험체를 제작하고 모르터로 단면을 증설하거나 강판 등으로 보강하는 방법으로 실험체의 휨성능을 향상시켰다. 보강이 완료된 실험체에 대하여 일정축력을 작용시킨 후 반복횡하중을 가력하여 구조성능을 평가하였다. 이때 작용시킨 횡력은 ACI에서 제시한 이력에 준하였다. 실험결과, 추가의 철근을 배치하고 단면을 증설한 경우에는 내력과 변형능력을 모두 증대시킬 수 있는 것으로 나타났으며 특히, 단면증설과 함께 단부에 U형태로 용접철망으로 횡구속한 실험체의 경우에는 강도와 연성의 측면에서 가장 효율적인 보강으로 확인되었다. 강판으로 보강하는 방법은 항복이후 부재의 급격한 내력저하를 방지하고 부재의 변형능력을 상승시키는데 매우 효과적인 것으로 나타났다.