• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.8 no.2
• /
• pp.379-385
• /
• 2004

Medical images are being managed more by PACS in general medical institutions. It is important to protect patients from being invaded their privacy related to the images. It is also necessary to confirm the ownership, the right of property of the medical images and notice whether the data are modified. In this paper, we propose a robust watermarking against RST attacks in medical images on the PACS. The proposed scheme modifies and improves Log-Polar Mapping and Fourier Mellin Transform in order to realize and recover serious image degradation and watermark data loss caused by the conversion between cartesian coordinate and log-polar coordinate. We used the radius and theta Look Up Table to solve the realization of the Fourier Mellin Transform, and inserted a watermark into 2D-DFT magnitudes using Spread Spectrum. Experimental results shows that this method are robust to rotation attack.

• Proceedings of the KAIS Fall Conference
• /
• 2010.11a
• /
• pp.142-146
• /
• 2010

기존의 전압강하 해석방법은 4상한의 전압강하분만 고려하여 계산을 수행하여 분산전원의 연계에 따른 역조류의 영향을 전혀 고려할 수 없어서, 분산전원이 투입하게 되면 전압강하 크기인 스칼라에 방향만 반대로 표시함으로써 전압강하 계산에 큰 오차를 발생시킬 수 있는 문제점을 안고 있다. 따라서 본 논문에서는 분산전원의 투입에 따라 변하게 되는 역률(Cos${\theta}$)을 고려하여 분산전원 연계에 따른 역조류의 영향을 수학적인 삼각함수의 좌표평면 해석방법에 기반하여 분산전원의 출력량을 고려한 분산전원 대응형 전압강하계산 알고리즘을 제안하였다.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.4 no.2
• /
• pp.143-150
• /
• 1984

This paper is a study on effectiveness of weight in analytical positioning of oblique photography. Oblique photographies are more economical than normal photographies as it has a larger ground coverage and as it can be applied in situations where objects of interest are difficult to be approached. But the comparatively complex methods involved, present a problem in obtaining the desired results. In view of this fact, analytical rectification was applied in normalizing the oblique photographs. As oblique photographies are extensively used in slops and mountainous regions, a number of difficulties are encountered during the control surveying. The photocoordinates of the oblique photographs, taken at $30^{\circ}$, were weighted during rectification. They were weighted as inversely proportionate to the derived formular of ${\gamma}_y=f{\cdot}tan{\frac{\theta}{2}}+y_a$, the distance of each point from the isocenter along the Y axis. By applying the weights, coordinates errors conld be reduced and the error difference between oblique and normal photographs could be reduced upto 53.2%.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.23 no.3
• /
• pp.247-253
• /
• 2019

In this paper, we present a new method for real-time tracking of human walking around a laser sensor system. The method converts range data with $r-{\theta}$ coordinates to a 2D image with x-y coordinates. Then human tracking is performed using human's features, i.e. appearances of human walking pattern, and the input range data. The laser sensor based human tracking method has the advantage of simplicity over conventional methods which extract human face in the vision data. In our method, the problem of estimating 2D positions and orientations of two walking human's ankle level is formulated based on a moving trajectory algorithm. In addition, the proposed tracking system employs a HMM to robustly track human in case of occlusions. Experimental results using a real system demonstrate usefulness of the proposed method.

• Journal of IKEEE
• /
• v.18 no.4
• /
• pp.593-602
• /
• 2014

One of the purposes of an artificial neural netowrk(ANNet) is to implement the largest number of functions as possible with the smallest number of nodes and layers. This paper presents a CoreNet which has a multi-leveled input value and a multi-leveled output value with a 2-layered ANNet, which is the basic structure of an ANNet. I have suggested an equation for calculating the capacity of the CoreNet, which has a p-leveled input and a q-leveled output, as $a_{p,q}={\frac{1}{2}}p(p-1)q^2-{\frac{1}{2}}(p-2)(3p-1)q+(p-1)(p-2)$. I've applied this CoreNet into the simulation model 1(5)-1(6), which has 5 levels of an input and 6 levels of an output with no hidden layers. The simulation result of this model gives, the maximum 219 convergences for the number of implementable functions using the cot(${\sqrt{x}}$) input leveling method. I have also shown that, the 27 functions are implementable by the calculation of weight values(w, ${\theta}$) with the multi-threshold lines in the weight space, which are diverged in the simulation results. Therefore the 246 functions are implementable in the 1(5)-1(6) model, and this coincides with the value from the above eqution $a_{5,6}(=246)$. I also show the implementable function numbering method in the weight space.

• Nuclear Engineering and Technology
• /
• v.20 no.3
• /
• pp.189-196
• /
• 1988

This study investigates the effect of fuel pellet eccentricity on fuel rod thermal performance under the steady state condition. The governing equations in the fuel pellet and the cladding region are set up in 2-dimensional cylindrical coordinate (r, $\theta$) and are solved by finite element method. The angular-dependent heat transfer coefficient in the gap region is used in order to account for the asymmetry of gap width. Material propeties are used as a function of temperature and volumetric heat generation as a function of radial position. The results show the increase of maximum local heat flux at the cladding outer surface and the decrease of maximum and average fuel temperatures due to eccentricity. The former is expected to affect the uncertainties in the minimum DNBR calculation. The latter two are expected to reduce the possibility of fuel melting and the fuel stored energy. Also, the fuel pellet eccentricity introduces asymmetry in fuel pellet temperature and movement of the location of maximum fuel pellet temperature.

• Journal of the Korean Ceramic Society
• /
• v.33 no.12
• /
• pp.1325-1330
• /
• 1996

A new numerical method for determining the surface tension of a liquid drop by experimental measurement of the contour of the sessile drop is explained. in the present method a very simple and short computer program enables the calculation of surface tension in a few seconds even by a low speed personal computer. It need not the use of any other numerical tables or complex techniques. X and Z-corrdinates at one point on the contour of a sessile drop and the tangential angle at that point are all the data needed when the density of the drop is known. The results were compared with the values derived by a conventional method. This method can be used for the confirmation of measuring accuracy. Also the same concepts can be applied for the pendant drop method by changing only the sign of Z-coordinate from "+" to "-"ot; to "-"ot;-"quot.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2004.05b
• /
• pp.241-246
• /
• 2004

Medical images are being managed more by PACS in general medical institutions. It is important to protect patients from being invaded their privacy related to the images. It is also necessary to confirm the ownership, the right of properity of the medical images and notice whether the data are modified. In this paper, we propose a robust watermarking against RST attacks in medical images on the PACS. The proposed scheme modifies and improves Log-Polar Mapping and Fourier Mellin Transform in order to realize and recover serious image degradation and watermark data loss caused by the conversion between cartesian coordinate and log-polar coordinate. We used the radius and theta Look Up Table to solve the realization of the Fourier Mellin Transform, and inserted a watermark into 2D-DFT magnitudes using Spread Spectrum. Experimental results shows that this method are robust to several attack.

• Journal of IKEEE
• /
• v.22 no.3
• /
• pp.638-644
• /
• 2018

In this paper, we develop a measurement system that uses 3D Scintillator and NaI(TI) Detector to 3-dimensionally identify the location of multiple radiation sources in moving vehicle loads. The radiation measurement system consists of radiation measurement (plastic scintillator), 2-channel Pulse Counter Board, nuclide analysis (NaI(TI) detector) and 1 channel MCA Board. The source locator algorithm calculates the coordinate value of the ratio of the CPS value($1/r^2$) of the source according to the angle(${\theta}$) in inverse proportion to the square of the distance(X, Y) through the SVM classification. The coordinate values are input every predetermined period of the spectrum, and after analyzing the spectrum per unit cycle, the position of the nuclide at the time is calculated by determining whether or not the nuclide is present in the remaining part except for the background area. As a result of the position discrimination test, the error within the international standard of ${\pm}1m$ was shown. Thus, the utility of the proposed system has been demonstrated.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.11 no.4
• /
• pp.1294-1300
• /
• 2010

In an environment where all nodes move, the sensor node receives anchor node's position information within communication radius and modifies the received anchor node's position information by one's traveled distance and direction in saving in one's memory, where if there at least 3, one's position is determined by performing localization through trilateration. The proposed localization mechanisms have been simulated in the Matlab. In an environment where certain distance is maintained and nodes move towards the same direction, the probability for the sensor node to meet at least 3 anchor nodes with absolute coordinates within 1 hub range is remote. Even if the sensor node has estimated its position with at least 3 beacon information, the angle ${\theta}$ error of accelerator and digital compass will continuously apply by the passage of time in enlarging the error tolerance and its estimated position not being relied. Dead reckoning technology is used as a supplementary position tracking navigation technology in places where GPS doesn't operate, where one's position can be estimated by knowing the distance and direction the node has traveled with acceleration sensor and digital compass. The localization algorithm to be explained is a localization technique that uses Dead reckoning where all nodes are loaded with omnidirectional antenna, and assumes that one's traveling distance and direction can be known with accelerator and digital compass. The simulation results show that our scheme performed better than other mechanisms (e.g. MCL, DV-distance).