• 제목/요약/키워드: xenon

검색결과 282건 처리시간 0.023초

광섬유 대기오존 모니터 (Optical Fiber Atmospheric Ozone Monitor)

  • 정완영
    • 대한전자공학회:학술대회논문집
    • /
    • 대한전자공학회 2002년도 하계종합학술대회 논문집(5)
    • /
    • pp.201-204
    • /
    • 2002
  • A high accuracy ozone monitor using UV absorption method was developed for ambient ozone monitoring. The system was mainly composed of a high power pulsed xenon lamp as UV source, an optical spectrometer with a high sensitivity linear CCD array as UV detector and signal processing unit. The optical signal from the CCD array that provides unusually high response and excellent optical resolution for ozone concentration was converted to digital signal and the digital signal was displayed on screen using PC interface. The optical signal was propagated using optic fiber to reduce optical loss to increase the accuracy of the measuring system. This paper has been studied a interworking signalling protocol between two hybrid networks by analyzing Satellite B-ISDN architecture, DSS2 Layer 3 Signalling protocol, B-ISUP protocol, S-BISUP protocol stack and so on. Also in the paper, messages and primitives have been defined for B-ISDN's Connection Type, Ownership and each protocol in order to connect point-to-multipoint. The ozone sensing properties of the CCD ozone monitor was compared with those of the photo multiplier ozone monitor.

  • PDF

ICP 제논 램프의 가스 압력과 공급 전력에 따른 광학적 특성연구 (The study of optical properties by gas pressure and applied power in ICP Xe lamp)

  • 최기승;이종찬;최용성;박대희
    • 대한전기학회:학술대회논문집
    • /
    • 대한전기학회 2005년도 추계학술대회 논문집 전기물성,응용부문
    • /
    • pp.119-121
    • /
    • 2005
  • The problem of lamp life have being solved before electrode-less lamps were developed. But, mercury is using till now. So people are concerned about friendly-environmental lamp, and many researcher hardly study it. In this paper, an ICP lamp which is using Xe gas and Ne gas was designed after optical properties were measured and analyzed. As a result, H-mode properties and penning effect properties were known. Also xenon and neon of properties analyze by spectrum.

  • PDF

교류형 PDP의 온도에 따른 방전특성 (Temperature-dependent Characteristics of Discharge in AC-PDP)

  • 김근수;이석현
    • 한국전기전자재료학회논문지
    • /
    • 제22권3호
    • /
    • pp.239-247
    • /
    • 2009
  • In AC-PDP, it is necessary to achieve high luminance efficacy, high luminance and high resolution by adopting technologies such as high Xenon concentration, MgO doping, and long gap. However, it is very difficult to apply above technologies because they reduce driving voltage margin. For example, doping of MgO reduces driving voltage but introduces new problems such as increased temperature dependency of discharge, which result in larger variations in driving margin at different temperatures. In this paper, we present the experimental results of the characteristics of temperature-dependent discharges. In addition, we suggest the mechanism of bright noise, black noise, and high temperature mis-discharge, which depend on temperature-dependent characteristics of MgO.

마이크로플라즈마 어레이 (Microplasma Arrays : Parallel Operation and Power Driving)

  • 박성진;김용상;최용호;조진훈;이규왕
    • 대한전기학회:학술대회논문집
    • /
    • 대한전기학회 2002년도 하계학술대회 논문집 C
    • /
    • pp.1893-1895
    • /
    • 2002
  • $50{\sim}100$ micron의 지름을 가지는 면광원용 마이크로 할로우캐소드형 태의 플라즈마광 어레이가 2인치 미만의 크기로 제작. 분석되었다. 본 연구에서 제작된 소자들은 금속-절연층-금속의 다층구조로 100 micron 미만의 소자두께를 가지며 $300{\sim}1200$ Torr의 Neon, Xenon 및 여러 기체 mixture에서 안정되게 구동되었고 구동전압은 $100{\sim}150V$ 범위로 관찰되었다. 이 밖에도 대면적 어레이내 소자간 병렬구동을 위한 다양한 구조의 소자들이 제작되었으며, 이들의 방전 및 발광특성, 그리고 전기적 특성이 분석되었다.

  • PDF

Simulation of Reactor and Turbine Poler Transients in CANDU 6 Nuclear Power Plants

  • Park, Jong-Woon-;Yeom, Choong-Sub;Kim, Sung-Bae-
    • 한국에너지공학회:학술대회논문집
    • /
    • 한국에너지공학회 1994년도 춘계학술발표회 초록집
    • /
    • pp.130-137
    • /
    • 1994
  • As a part of developing engineering simulator for CANDU 6 nuclear power plants, present paper gives the tentative simulation results of reactor and turbine power transients including reactor-follow-turbine operation. One point kinetics equations are used for neutron dynamics, iodine and xenon loads. To calculate time-dependent high and low pressure turbine powers and grid frequency deviation, simple first order differential equations are used. In addition, control logics (reactor regulating system, demand power routine, and unit power regulator) used in the plant's process computers have been referenced.

  • PDF

온돌용 목질마루판의 표면물성 (Surface Properties of Wood-Based Floorings for Under Heating Systems (Ondol))

  • 김종인;박종영;이병후;김현중
    • 한국가구학회지
    • /
    • 제13권1호
    • /
    • pp.27-37
    • /
    • 2002
  • This study was investigated with the surface properties such as physical and accelerated tests of wood-based floorings. In physical test, hardness and abrasion resistance values of laminate floorings were higher than those of others. The center line average surface roughness($R_a$) of imported laminate flooring was highest value($1.34{\mu}m$) and that of imported solid wood flooring was lowest value($0.62{\mu}m$). In cold resistance and moist heat resistance, no defects were found on the surface of all flooring (crack, blistering, peeling, and gloss loss etc.) after testing. Wet-cold-dry cycle test showed that plywood flooring appeared some cracks. In accelerated weathering test, color difference increased with increasing Xenon arc light irradiation

  • PDF

Photovoltaic Effects in CuPc/C60 and ZnPc/C60 Depending on the Organic Layer Thickness

  • Ahn, Joon-Ho;Lee, Joon-Ung;Lee, Won-Jae
    • Transactions on Electrical and Electronic Materials
    • /
    • 제6권3호
    • /
    • pp.115-118
    • /
    • 2005
  • Organic photovoltaic properties were studied in $CuPc/C_{60}$ and $ZnPc/C_{60}$ heterojunction structure by varying the organic layer thicknesses. Current density-voltage characteristics of organic photovoltaic cells were measured using Keithley 236 source-measure unit and a 500 W xenon lamp (ORIEL 66021) for a light source. From the analyses of current-voltage characteristics such as short-circuit current density, open-circuit voltage and power conversion efficiency, optimum thickness of the organic layer were obtained.

제논램프 구동을 위한 새로운 기법의 고전압 발생회로 (Novel High Voltage Generator Circuit Design for Igniting Xenon Lamp)

  • 전병구;조준동
    • 전력전자학회:학술대회논문집
    • /
    • 전력전자학회 2008년도 하계학술대회 논문집
    • /
    • pp.180-182
    • /
    • 2008
  • 제논램프를 점등시키기 위해서는 램프방전 초기에 수십kV의 고전압펄스를 발생시켜주어야 한다. 고전압펄스의 생성은 주로 transformer의 전자기유도작용을 이용한다. 지금까지는 주로 1개의 고주파 transformer를 이용하여 고전압펄스를 발생시키는 회로가 구성되어 왔다. 이 경우 회로가 단순해지는 이점이 있지만 transformer의 부피가 커지게 되어 상대적으로 보드에서 많은 공간을 차지하게 되는 단점이 있다. 따라서 본 논문에서는 기존의 단점을 해결하고자 고주파 transformer 1개를 사용하는 대신 소형의 고주파 transformer 2개를 2단계 step-up 회로로 구성하였다. 제안된 회로의 구성과 동작에 대하여 분석하였고 실험을 통해 제안된 회로가 유용함을 검증하였다.

  • PDF

양친매성 스쿠아릴리움색소 초박막의 전기적 특성 (Electrical Properties of Amphiphillic Squarylium Dye Ultra Thin Films)

  • 정순욱
    • 한국응용과학기술학회지
    • /
    • 제20권2호
    • /
    • pp.177-181
    • /
    • 2003
  • Ultra-thin films of amphiphillic squarylium dye were prepared on the hydrophillic substrate by Langmuir-Blodgett(LB) technique. In this study, the photoelectric properties of a amphiphillic squarylium dye LB film was investigated. The visible light(${\lambda}$ = 684nm ) of xenon lamp was illuminated on the amphiphillic squarylium dye LB films and light absorptivity and photoconductivity were observed. The photoconductivity was nearly constant regardless of nominal layer number. The photoelectric properties of the amphiphillic squarylium dye LB films with bottom electrode showed better than that top electrode.

불투명 수지재료의 복사에너지에 의한 변색 측정 (Measurement of Color Change of Opaque Resin Materials by Radiation Energy)

  • 한종성;김홍범;김훈
    • 한국조명전기설비학회:학술대회논문집
    • /
    • 한국조명전기설비학회 1998년도 학술발표회논문집
    • /
    • pp.138-141
    • /
    • 1998
  • To evaluate the color change of the opaque resin materials, a measuring system including PAS(photodegradation acceleration system) was constructed. Xenon lamp is used as a light source in the PAS, and the radiant energy from the lamp is irradiated to the samples through serveral high-pass filters with cut-off wavelength in UV and visible region. The color difference of the samples were measured by using the measuring system with a spectrophotometer(CM-2002) and a computer. The result showed that the opaque resin materials changed severely in their color in the wavelength of UV region and changed a little in the wavelength of visible region.

  • PDF