• Korean Journal of Materials Research
• /
• v.17 no.11
• /
• pp.612-617
• /
• 2007

Both photoluminescence and thermal characteristics for $SrAl_2O_4:Eu^{+2},\;Dy^{+3}$ phosphors synthesized with various aluminum compounds (${\alpha}-Al_2O_3$, ${\gamma}-Al_2O_3$, amorphous-$Al_2O_3$ and $Al(OH)_3)$ were investigated in this study. The formation temperature of the host $SrAl_2O_4$ crystal is changed by these various aluminum compounds, as a result of the different thermal decomposition temperature of $SrCO_3$ phase. Among these compounds, the amorphous-$Al_2O_3$ phase shows the lowest formation temperature of the host $SrAl_2O_4$ crystal. The PL emission and excitation spectra of $SrAl_2O_4:Eu^{+2},\;Dy^{+3}$ phosphor are not affected by these aluminum compounds. After the removal of the Xenon lamp excitation (360 nm), however, the excellent longphosphorescent property of the phosphor is obtained by the amorphous-$Al_2O_3$ phase, although the decay time for all phosphors decrease exponentially.

• Proceedings of the KIPE Conference
• /
• 2006.06a
• /
• pp.206-209
• /
• 2006

At present, the cold cathode fluorescent lamp (CCFL) using mercury lamp has been generally used far liquid crystal backlight source of personal computer and car navigation and so on. This kind of lamp is more excellent on luminance performance and cost. However, the requirements of liquid crystal backlight due to a light source without mercury have been strongly increased from a viewpoint of the actual influence on environmental preservation and environmental recycling. As fluorescent lamp without mercury, Dielectric Barrier Discharge based rare gas fluorescent lamp (DBD-FL) using xenon (Xe) gas has been studied so far. This DBD lamp has no influence on the human body and environmental recycle. Its operating life is long because electrode is out. In this paper, the simulation and experimental results of soft switching high frequency inverter with reverse blocking single switch as a high frequency power supply circuit for DBD-FL using Xe gas are comparatively evaluated and discussed from a practical point of view.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2005.11a
• /
• pp.285-286
• /
• 2005

Organic photovoltaic properties were studied in ZnPc/$C_{60}$ heterojunction structure by varying the organic layer thicknesses and exiton blocking layer(EBL). Current density-voltage characteristics of organic photovoltaic cells were measured using Keithley 236 source-measure unit, a 500W xenon lamp (ORIEL 66021) for a light source and Agilent 4294A impedance analyzer in the range of 40 Hz $\sim$ 1 MHz. From the analyses of current-voltage characteristics such as short-circuit current density, open-circuit voltage and power conversion efficiency, optimum thickness of the organic layer were obtained and frequency response such as electrical conductance.

• Analytical Science and Technology
• /
• v.5 no.3
• /
• pp.285-294
• /
• 1992

Structures of dimers of the acetonitrile and DMF diluted by carbon-tetrachloride and xenon matrices at 80K were studied with infrared absorption spectroscopy. Sample and matrix materials were codeposited onto a KBr cold trapping window. Infrared absorption spectra of pure samples and diluted samples were compared to explain the structures of dimers. The acetonitrile dimer showed the antiparallel shape and the DMF dimer showed the linear shape. After annealing, the infrared spectrum of the diluted sample showed the same shape with that of the pure sample.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.38 no.8
• /
• pp.834-841
• /
• 2010

The STSAT-3 (science and technology satellite) is the first satellite whose entire structure was made of composite materials in Korea and it will be launched later in 2011. As like other small satellites, it is also equipped with several advanced instruments whose major objectives focused on the scientific tests in space. The HPS (hall thruster propulsion system) using xenon gas as a propellant has been developed and its overall ground tests were conducted. This research emphasizes on the technologies and procedure applied to the development of the entire HPS and its function and environment tests.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.16 no.2
• /
• pp.181-187
• /
• 1992

일반적으로 면섬유는 햇빛에 의해서 변색되거나 약해지며 또 그 외에도 여러가지 물리적, 화학적인 변화를 일으키게 된다. 구체적인 화학반응의 메카니즘은 사용되는 광선의 스펙트럼, 대기조건(실내인 경우는 실내 환경조건) , 산소의 유무 그리고 염료 등 첨가물의 종류와 같은 여러 요소에 의해 크게 영향을 받게 된다. 환경조건 중에서 산소의 존재는 매우 중요하지만 open system에서 산소의 농도가 일정하다고 가정할 때 면섬유가 접하고 있는 환경조건 중에서 온도와 습도는 photodegradation의 속도를 결정짓는 중요한 요인으로 작용하게 된다. 박물관,:기념관, 도서관 등의 소장품이 자연광선이나 인공조명으로부터 손상되는 것을 막기 위해서는 먼저 이들의 photodegradation 현상에 대한 연구를 필요로 한다. 본 연구에서는 면시칩포를 자연광선과 가장 흡사한 스펙트럼을 가진 xenon arc lamp를 사용한 내후도 시험기내에서 온도와 습도를 조절하여 이에 따른 반응속도의 차이를 인열강도의 감소와 중합도 저하로 측정하였다. 1차 반응식은 실험결과를 설명하는데 유용하였으며 온 · 습도의 증가는 반응속도를 증가시키는 것으로 나타나 기존의 상반된 연구결과의 차이를 입증하였다. 또 온도와 습도는 상호관련이 있는 것으로 나타났으며 고온인 경우습도의 영향을 더 크게 받는 것으로 분석되었다. 반응의 활성에너지는 $30\~75\%$ RH에서는 12 kcal/mole 정도이며 수분의 함량이 낮을수록 활성화에너지는 커지는 것으로 나타나 수분은 섬유소 분자구조내에서 가소제 (plasticizer)의 역할을 하는 것으로 판명되었다.

• Journal of the Korean Chemical Society
• /
• v.27 no.4
• /
• pp.262-267
• /
• 1983

A study has been carried out for a scheme of the selective extraction and determination of cesium, sodium and nuclides by the ion association with dicyclohexyl-24-crown-8 and sodium tetraphenylborate from primary coolant of a pressurized water reactor. For that purpose, the effects of hydrogen, cesium and borate ions on the extraction have been investigated. Interferences of iodine and xenon nuclides were found but could be removed by reducing with sodium thiosulfate and back extraction with 1 N hydrochloric acid solution, respectively.

• Nuclear Engineering and Technology
• /
• v.43 no.3
• /
• pp.309-316
• /
• 2011

Molybdenum is the most abundant fission product since its fission yield is equivalent to that of xenon, and it has a very special role in the chemistry of nuclear fuel because it influences the oxygen potential of $UO_2$ fuel. In this study, the distribution of molybdenum in spent $UO_2$ fuel specimens with 33.3, 41.0 and 57.6 GWd/tU burnup was measured by a LA-ICP-MS system and the reproducibility of the measured data was obtained. The Mo distribution was almost constant along the radius of a fuel except an increase at the periphery of the fuel. It showed a drop in reproducibility with relatively high deviation of measured values for the highest burnup fuel. To explain this, the state of molybdenum in a $UO_2$ matrix and its effect on the oxidation behavior of $UO_2$ were investigated. The low reproducibility was explained by the segregation of molybdenum, and the inhibition of oxidation by the molybdenum was also observed.

• 한국태양에너지학회:학술대회논문집
• /
• 2011.11a
• /
• pp.307-313
• /
• 2011

금속산화물을 이용한 2단계 산화/환원 반응은 GTL, CTL 의 반응원료인 합성가스 및 수소 생산기술이다. 이 기술은 메탄을 환원제로 사용함으로써 비교적 저온에서 산화/환원 반응을 할 수 있는 장점이 있다. 하지만 반복 사이클의 시연에서 금속산화물의 소결현상으로 인한 활성저하가 이 기술의 문제점 중의 하나이다. 본 연구에서는 2.5 kW Xenon arc lamp 가 설치된 solar simulator를 사용 하였으며, 무기물 다공성 폼 (SiC foam)및 유기물 다공성 폼 (Ni, Cufoam)에 $CeO_2/ZrO_2$ 를 코팅하여 연속적인 합성가스 및 수소 생산 가능성을 알아보았다. 반응 전 후의 $CeO_2/ZrO_2$ 의 결정 구조를 SEM 과 XRD 를 통해 분석하였다.

• 한국정보디스플레이학회:학술대회논문집
• /
• 2009.10a
• /
• pp.687-690
• /
• 2009

It has been recently reported that nano-sized MgO single crystal powders emit ultraviolet by stimulation of electrons under vacuum condition. Therefore, in this study, nano-crystalline MgO powders were applied to a xenon plasma flat fluorescent lamp for LCD backlight to improve emission efficiency of the lamp by help of extra ultraviolet from nano-MgO. For comparison with nano-crystalline MgO powders, MgO nano-thin film was applied directly on phosphors inside a lamp panel through e-beam evaporation The luminance and efficiency of FFL with an addition of MgO nano-crystal powders on phosphors were improved by around 20%. Application of MgO thin film to phosphors worsened the emission characteristics of FFLs, even rather than FFL without MgO. The reason came from insufficient stimulation of phosphors by UV, crystallinity of MgO, and low secondary electron coefficient.