• Journal of the korean academy of Pediatric Dentistry
• /
• v.29 no.3
• /
• pp.328-336
• /
• 2002

Recently, new light curing unit utilizing the plasma xenon arc lamp is introduced. This curing unit is operated at relatively high intensity, so shortening the curing time significantly. The aim of this experiment was to estimate curing capability of plasma xenon arc lamp curing unit compared to traditional halogen lamp curing unit. Degree of conversion was evaluated by Raman spectroscopy after irradiation of specimens with halogen lamp curing unit(Optilux 150, Demetron, USA) for 20s, 40s, 60s and plasma xenon arc lamp curing unit(flipo, Lokki, France) for 2s, 3s, 6s. The results showed that strong light intensity of plasma xenon arc lamp curing unit did not compensate for short exposure time completely. So, Multi-layered curing within 2mm thickness and additional exposure time is recommanded when light-cured composite resin is polymerized with plasma xenon arc lamp curing unit.

• Nuclear Engineering and Technology
• /
• v.31 no.1
• /
• pp.80-87
• /
• 1999

An analytic axial xenon oscillation model was developed for pressurized water reactor analysis. The model employs an equation system for axial difference parameters that was derived from the two-group one-dimensional diffusion equation with control rod modeling and coupled with xenon and iodine balance equations. The spatial distributions of nu, xenon, and iodine were expanded by the Fourier sine series, resulting in cancellation of the flux-xenon coupled non-linearity. An inhomogeneous differential equation system for the axial difference parameters, which gives the relationship between power, iodine and xenon axial differences in the case of control rod movement, was derived and solved analytically. The analytic solution of the axial difference parameters can directly provide with the variation of axial power difference during xenon oscillation. The accuracy of the model is verified by benchmark calculations with one-dimensional reference core calculations.

• Proceedings of the Korean Nuclear Society Conference
• /
• 1996.05a
• /
• pp.88-93
• /
• 1996

The initial condition should be consistent with real reactor core state for the simulation of the core transient. The initial xenon distribution, which cad not be measured in the core, has a significant effect on the transient with xenon dynamics of PWR. In the simulation of the transient stating from non-equilibrium xenon state, the accurate initialization of the non-equilibrium xenon distribution is essential to predict the core transient behavior. In this study, the xenon initialization method to predict the core transient more accurately was developed through the first-order perturbation theory of the relationship between simulated power and measured power distribution and verified by the application of the simulation for a startup test of Yonggwang Unit 3.

• Nuclear Engineering and Technology
• /
• v.52 no.6
• /
• pp.1131-1136
• /
• 2020

Xenon behaves differently in molten salt reactors (MSRs) compared to solid fuel reactors. This behavior needs exploring due to the large reactivity effect of the ¹³⁵Xe isotope, given the current interest in MSR power plant development for commercial deployment. This paper focuses on select topics in xenon transport, reviews relevant past works, and proposes specific research questions to advance the state of the art in each of the focus areas. Specifically, the paper discusses the issue of xenon solubility in MSRs, the behavior of particulates circulating in MSR fuel salt and its influence on the xenon transport, the possibility of ionization of xenon atoms which changes its effective size and thus affects its mass transport, and finally the issue of circulating void fraction and how it is measured. This work presents specific recommendations for MSR designers to research the limits of Henry's law validity, circulating particulate scrubbers, validity of mass transport coefficients in high radiation fields, and the effects of pump speed on circulating void fraction.

• Nuclear Engineering and Technology
• /
• v.27 no.6
• /
• pp.853-858
• /
• 1995

The initial condition of a core transient should be consistent with real core state for the simulation of the core tansient. The initial xenon distribution, which can not be measured in the core, has a significant effect on the transient with xenon dynamics. In the simulation of the transient starting from non-equilibrium xenon state, the accurate initialization of the non-equilibrium xenon distribution is essential for the prediction of the core transient behavior. In this study, a xenon initialization method to predict the core transient more accurately was developed through the equivalent pre-xenon-oscillation which represents the tenon oscillation before the transient and verified by the application of the simulation for a startup test of Yonggwang Unit 3.

• Nuclear Engineering and Technology
• /
• v.56 no.2
• /
• pp.601-610
• /
• 2024

This paper gives an extensive analysis on the characterization of xenon isotopic ratios for various nuclear reactors and nuclear explosions through neutronic depletion codes. The results of the characterization can be used for discriminating the sources of the xenon isotopes' release among the nuclear explosions and nuclear reactors. The considered sources of the xenon radionuclides do not only include PWR, CANDU, and nuclear explosions using uranium and plutonium bombs, but also IRT-200 and 5MWe Yongbyon (MAGNOX reactor) research reactors operated in North Korea. A new data base (DB) on xenon isotopic activity ratios was produced using the results of the characterization, which can be used in discrimination of the sources of xenon isotopes. The results of the study show that 5MWe Yongbyon reactor has quite different characteristics in ¹³⁵Xe/¹³³Xe ratio from the PWRs and the nuclear reactors have different characteristics in ¹³⁵Xe/¹³³Xe ratios from the nuclear explosions.

• Nuclear Engineering and Technology
• /
• v.56 no.4
• /
• pp.1372-1384
• /
• 2024

The discrimination of the source for xenon gases' release can provide an important clue for detecting the nuclear activities in the neighboring countries. In this paper, three machine learning techniques, which are logistic regression, support vector machine (SVM), and k-nearest neighbors (KNN), were applied to develop the predictive models for discriminating the source for xenon gases' release based on the xenon isotopic activity ratio data which were generated using the depletion codes, i.e., ORIGEN in SCALE 6.2 and Serpent, for the probable sources. The considered sources for the neighboring countries of South Korea include PWRs, CANDUs, IRT-2000, Yongbyun 5 MWe reactor, and nuclear tests with plutonium and uranium. The results of the analysis showed that the overall prediction accuracies of models with SVM and KNN using six inputs, all exceeded 90%. Particularly, the models based on SVM and KNN that used six or three xenon isotope activity ratios with three classification categories, namely reactor, plutonium bomb, and uranium bomb, had accuracy levels greater than 88%. The prediction performances demonstrate the applicability of machine learning algorithms to predict nuclear threat using ratios of xenon isotopic activity.

• Journal of Korean Vacuum Science & Technology
• /
• v.4 no.4
• /
• pp.112-121
• /
• 2000

The paper investigates electrical discharge properties in neon gas mixed with xenon. The breakdown temperature T$\sub$b/ and voltage V$\sub$b/ are obtained in terms of the gas mixture ratio X. It is shown that the breakdown voltage decreases, reaches the minimum value at X=0.02 and then increases again, as the mixture ratio X increases from zero to unity. Therefore, mixing the neon gas with a few percent of xenon is the most beneficial to reduce the breakdown voltage. Plasma density at breakdown in neon gas mixed with xenon is described in terms of the gas mixture ratio. The optimum value of mixture ratio for highest plasma density is found to be Xm=0.03. A preliminary experiment of AC-PDP is carried out for neon gas mixed with a few percent of xenon to verify some of the theoretical models. The experimental data agree qualitatively well with theoretical predictions.

• Proceedings of the Korean Society of Medical Physics Conference
• /
• 2002.09a
• /
• pp.285-288
• /
• 2002

In this study, we investigate electron transport properties in xenon gas by using a Monte Carlo technique for electrons with energies below 10 keV. First of all, we determine a set of electron collision cross sections with xenon by scrutinizing the cross section data taken from many publications. Then, the W value and the Fano factor for electrons in gaseous xenon are computed by the Monte Carlo simulation on the assumption that electrons undergo single collision events including elastic, excitation and ionization processes. We also evaluate the production number of excited atoms.

• Textile Coloration and Finishing
• /
• v.18 no.6 s.91
• /
• pp.37-42
• /
• 2006

Researches to preserve and restore the remaining fabrics as costume heritages have been carried out. In this study, in order to artificially restore an excavated silk fabrics, degummed silk fabrics and safflower dyed silk fabrics were prepared for an experiment. These fabrics were photo-degraded by the Xenon arc beam to have various strength retention(100%, 80%, 60%, 40%, 20%). The fine structure and physical properties of Xenon arc treated fabrics were investigated with various techniques such as tensile test, weight loss, wide-angle X-ray diffraction, yellowness, color, SEM etc. Tensile strength and the crystal diffraction intensity of silk fabrics decreased as Xenon arc hem treatment time increased. Weight loss increased slightly. Strength retention was decreased as the Xenon arc beam treatment time goes by. (Yellowness of the undyed silk fabrics and $L^*$ of the dyed silk fabrics increased. Whiteness of the undyed silk fabrics and $b^* of the dyed silk fabrics decreased.) SEM results of the silk fabrics treated Xenon arc beam show that surface was a little damaged.