• Journal of Korean Medicine Rehabilitation
• /
• v.20 no.1
• /
• pp.79-90
• /
• 2010

Objectives : Tai Chi for arthritis was developed in 1997 by Paul Lam, M.D. of family medicine in Australia. It is an exercise treatment program and a good approaching method for arthritis. However its application is limited to arthritis of knee joint only. Even there have been no clinical study in korean traditional medical society. The aim of this study is to investigate effect of the Tai Chi for arthritis on chronic pain of body. Methods : We designed this trial as objectives were (1) senior female over 60 years, (2) suffering for osteoarthritis and chronic body pain, (3) have no physical or mental dysfunctions (4) able to walk and exercise alone. Objectives mactched these criteria had been trained the Tai Chi for arthritis 2 hours a day for 21 weeks. Before and after training, pain of 8 joints (neck, shoulder, elbow, wrist, waist, hip, knee, ankle) were estimated with the VAS(Visual Analog Scale). Results : Training the Tai Chi for arthritis relieved multiple joint pain(especially neck, lower back, shoulder, wrist and knee) and these were statistically significant. Conclusions : This study is a pilot study to investigate effect of the Tai Chi for arthritis on chronic pain of whole body. Absence of control group, and other scale to test joint function except VAS were limitations of this study. It is the first clinical approach about Tai Chi in korean medicine field, also the first study of Tai Chi for pain of the whole body.

• Archives of Reconstructive Microsurgery
• /
• v.16 no.2
• /
• pp.125-132
• /
• 2007

Introduction: Ulna is nearly equal to radius in function and bony architecture and strength in forearm. But in lower extremity, fibula is 1/5 of tibia in anatomic and functional point so we can find fibula transposition is commonly used in defect of tibia. We cannot find other article about segmental forearm bone transposition in man. The purpose of this study was to report our clinical and functional result of undergoing segmented transposition of ipsilateral ulna with its own vascular supply in defect of radius in 6 cases. Material and method: From June 1994 to October 2007, 7 segmented bone transpositional grafts in forearm were performed in Kyung Hee Medical Center. The distribution of age was from 20 years old to 73 years old. There was male in 6 cases and female in 1 case. The causes of operation were giant cell tumor in 1 case and traumatic origin in 6 cases; it was nonunion in 2 cases and fracture with severe comminution in 4 cases. Ipsilaterally segmented ulna keeping its own vascular supply was transported to defect of radius in severe traumatic patients and one patient whose tumor in radius had been excised. Transported ulna was fixed to proximal and distal radius remnants by plate and screw. In one case with giant cell tumor, transported ulna was connected to radius across wrist joint as wrist joint fusion. Joint preserving procedures were performed in 6 cases with crushing injury of radius. Results: We could obtain solid bony union in all cases and good functional results. The disadvantage was relative shortening of forearm, but we could overcome this problem. Conclusion: We think that ipsilateral segmented ulna transposition keeping its own vascular supply to radius can be perfomed with one of procedures in cases with wide defect in radius.

• Korean Journal of Applied Biomechanics
• /
• v.16 no.1
• /
• pp.151-158
• /
• 2006

The purpose of this study was to find out the kinematical characteristics of arm's basic position in ballet. In order to achieve the purpose of the study, 3D cinematographic analysis was conducted with a ballerina who might performed the perfect arm's basic position. According to the results of this study, it was appeared that the shoulder kept about 78%-82%, the elbow kept about 62%-96%, the wrist kept 52%-109%, and finger kept 48%-110% with the height. Also, movement was formed with $21^{\circ}-77^{\circ}$ of the upper arm angle, $106^{\circ}-164^{\circ}$ of the elbow, $125^{\circ}-140^{\circ}$ of the wrist, and $83^{\circ}-160^{\circ}$ of the shoulder. The left-right ratio of the total arm angle was 98% in the first, second, and third position, and 100% in the forth position. The angle of arm gradient was remained $-68^{\circ}$ in the first position, $-27^{\circ}$ in the second position, $73^{\circ}$ in the third position, and $-11^{\circ}$ in the forth position. Based on the results mentioned above, balance and symmetry of both arms was an important factor in those four positions. Although it is impossible to maintain the position like robot, it may be a good performance if a certain level of extent was remained With respect to this point of view, it may be a good position if the difference between right and left arm in each joint can be remained within 2%. Angle also was an important factor that if the difference in total angle can be remained within 2% it may be an excellent position, there was difference of right and left based on the joint though. Therefore, practice and instruction to make a perfect symmetry as much as possible were needed Also, it would be a good movement if position and angle of joint within 2% difference of right and left arm can be remained In turn, because ballet is movement with expression of the body, beauty of the body and balance of the movement have to be harmonized for beautiful performance. Therefore, it would be a meaningful future study considering the body condition and movement of ballerina to define the beauty.

• Journal of the Ergonomics Society of Korea
• /
• v.34 no.1
• /
• pp.1-10
• /
• 2015

Objective: The purpose of this paper is to evaluate old and newly designed ammunition boxes from an ergonomic point of view. Background: The ammunition boxes made of wood, which are currently used by the military, have some difficulties such as corrosion and damage of ammunition, environmental pollution, and stock management. Also, damages to the wooden ammunition boxes take place frequently, because soldiers carry them manually. Method: Sixteen participants volunteered to randomly perform lifting, carrying, and side-by-side moving tasks with 4 different old and new boxes, respectively for the ammunitions of 5.56mm, 60mm, 81mm, and 105mm in diameter. The old boxes are made of wood and are currently used in the military, while the new boxes are made of plastics. The joint moments of the elbow, shoulder, back, and knee were measured by using a motion analysis system and force platforms. In addition, an electromyographic system was used to measure the forces of hand and wrist muscles. Results: In most tasks, new boxes caused less joint moments at the elbow and shoulder than old boxes, because the new boxes were lighter and smaller than the old boxes. New boxes also derived less hand and wrist muscle forces due to the provision of fixed hard handles rather than string handles. Conclusion: The ergonomically designed new boxes could reduce the physical stresses of soldiers manually handling ammunitions and be helpful for storage and reuse. Application: This study shows an ergonomic application example for product development and evaluation.

• Journal of Industrial Technology
• /
• v.21 no.B
• /
• pp.265-272
• /
• 2001

The human arm is modeled by three rigid bodies(the upper arm, the forearm and the hand)with seven degree of freedom(three in the shoulder, two in the elbow and two in the wrist). The objective of this work is to present a method to determine the three-dimensional kinematics of the human elbow joint using a magnetic tracking device. Euler angle were used to determine the elbow flexion-extension, and the pronation-supination. The elbow motion for the various driving conditions is measured through the driving test using a simulator. Discomfort levels of elbow joint motions were obtained as discomfort functions, which were based on subjects' perceived discomfort level estimated by magnitude estimation. The results showed that the discomfort posture of elbow joint motions occurred in the driving motion.

• Proceedings of the ESK Conference
• /
• 1997.04a
• /
• pp.100-106
• /
• 1997

The purpose of this study is to measure perceived joint discomfort in the seated and standing position, and to provide a ranking system of joint discomfort measured in this study. Seven male subjects with no history of musculo-skeletal disorders participated in the experiment. Their physical characteristics were: age -$27.6 {\pm}1.8$ years, stature -$171.0 {\pm}5.5cm$, and body weight -$66.4{\pm}9.3kg$. The results showed that perceived joint discomfort was different depending on the human body joints involved in motion and their movement directions, which imply that the human body motions should be classified intoseveral distinct classes that need to be assigned different weights of postural stress. In the seated postion, the hip movement was the most stressful, the back was the second, and the shoulder was the third. Similarly, in standing postures, the hip was given the highest ranking, followed by the back, and the wrist.

• Journal of Institute of Control, Robotics and Systems
• /
• v.16 no.4
• /
• pp.374-380
• /
• 2010

This paper proposes a wearable interface for a tendon-driven robotic hand prosthesis. The proposed interface is composed of a dataglove to measure finger and wrist joint angle, and a micro-control board with a wireless RF module. The interface is used for posture control of the robotic hand prosthesis. The measured joint angles by the dataglove are transferred to the main controller via the wireless module. The controller works for directly controlling the joint angle of the hand or for recognizing hand postures using a pattern recognition method such as LDA and k-NN. The recognized hand postures in this study are the paper, the rock, the scissors, the precision grasp, and the tip grasp. In experiments, we show the performances of the wearable interface including the pattern recognition method.

• Physical Therapy Korea
• /
• v.27 no.2
• /
• pp.118-125
• /
• 2020

Background: Lateral epicondylitis (LE) is the most common chronic musculoskeletal pain condition of the upper extremities. LE is often related to forceful grip activities that require isometric contraction of the wrist extensors. A previous study evaluated the effect of the diamond taping technique on grip strength and pain; however, there has been no report on the change in the electromyography (EMG) findings of wrist extensors. Objects: The aim of this study was to investigate the effect of diamond taping technique, using a rigid tape, on the EMG activities of the extensor carpi radialis (ECR) during grip activities. Methods: Twenty-four healthy subjects (mean age = 21.50 ± 2.76 years) volunteered to participate in this study. The subjects were instructed to perform forceful grip activities with and without diamond-type taping on the origin area of the ECR. Grip strength tests were performed at 100%, 75%, 50%, and 25% for maximal isometric contraction force. EMG data were collected from the ECR. Repeated measure analysis of variance was used to analyze the effect of grip force and taping (with and without). Statistical significance levels were set at α = 0.05. Comparison of the results with and without taping at different grip force were analyzed using independent t-test. Statistical significance levels were set at α = 0.01. Results: Statistically significant association was observed between the taping application and forceful grip activity as revealed by the EMG data of the ECR (p < 0.05). EMG of the ECR significantly reduced for all muscle strength levels (p < 0.01) after taping. Conclusion: This study shows an impressive effect of the diamond taping technique, using rigid tape, on wrist extensors during grip activities. Decreasing muscle activity via this taping approach could be utilized to enhance pain-free grip force and reduce pain in patients with LE. Our study suggested that this taping technique could be considered as an effective management strategy of LE.

• Journal of the Korean Society of Physical Medicine
• /
• v.15 no.3
• /
• pp.79-87
• /
• 2020

PURPOSE: Physical therapists are always exposed to work-related musculoskeletal disorders. Although kinesio taping can support the joints and assist movement, studies of the effects of kinesio taping on these physical therapists are lacking. This study examined the effects of Kinesio-taping on pain, grip strength, range of motion and daily living skills in physical therapists with work-related musculoskeletal disorders. Pain was measured using a 100 mm VAS. The grip strength was measured using a handgrip dynamometer. The range of joint motion was measured using a goniometer. Living skills were measured by patient-rated wrist evaluation. METHODS: Twenty physical therapists with wrist pain (Kinesio taping: n = 10, Sham taping: n = 10) received taping for each group, and measured the pain, grip strength, range of motion and daily living skills before (Baseline) and after taping (Nine hours). RESULTS: All data were analyzed using Repeated Measure ANOVA (p < .05). In the Kinesio group, resting pain (-14.9), movement pain (-20.5), and daily living skills (-9.55) were improved significantly compared to the baseline (p < .05). The grip strength and range of motion were not changed (p > .05). The sham group showed no significant change in all variables (p > .05). CONCLUSION: Physical therapists with work-related musculoskeletal disorders of the wrist should apply kinesiotaping to improve the occupational tasks.

• Journal of the Korean Orthopaedic Association
• /
• v.56 no.1
• /
• pp.51-60
• /
• 2021

Purpose: Radiocarpal dislocation (RCD), which is caused by high-energy trauma, often involves radial styloid fractures and short radiolunate ligament (SRLL) injuries. Although SRLL injuries may occur as a simple rupture at the attachment site of radius, it may occur with a relatively large avulsed-fragment in the volar rim of the lunate facet of the radius. This study aimed to differentiate the injury type of SRLL and assess the differences in the treatment results depending on the treatment methods that have been applied in RCD with radial styloid fractures. Materials and Methods: Eighteen patients managed surgically with RCD were enrolled in this study. The patients were classified as Group 1 and Group 2 by using the Dumontier method. In this study, Group 2 was subdivided into 2A (purely ligamentous or small avulsion fracture of the volar rim of lunate facet) and 2B (large avulsed-fragment enough to internal fixation) according to the injury type of SRLL. Groups 2A and 2B were treated with direct repair and screw fixation, respectively. Pain, range of motion of the wrist joint, grip strength, and complications on final radiographs were examined. The outcomes were evaluated using patient-rated wrist evaluation (PRWE), and modified Mayo wrist score (MMWS). Results: All patients were Group 2 (six and twelve patients in 2A and 2B, respectively). The mean flexion to extension arch recovered 79%,and the mean grip strength was 72.9% of the uninjured side. Group 2A showed better recovery in extension, flexion and pronation than Group 2B, but there was no difference in radial deviation, ulnar deviation, supination, grip strength and pain. No differences in the PRWE and MMWS were observed between two groups. Complications included traumatic arthritis in seven patients and residual instability in five patients. Conclusion: When the SRLL was injured, the involvement of a large avulsion fracture on the anterior plane of the radiolunate did not affect the test results. On the other hand, it should be observed cautiously because avulsion fractures tend to disturb the joint's reduction through rotation or displacement. In addition, anatomical reduction and sturdy internal fixation are important for restoring the function of the SRLL.