• Journal of Biosystems Engineering
• /
• v.27 no.4
• /
• pp.335-340
• /
• 2002

Recently, in Korea, round bale wrapping silage made by fresh rice straw are partially utilized. The colors of stretch film using far wrapping the fresh rice straw round bale are white, green and black. The light transmittance of green and white color stretch film was not founded the difference. However, the light transmittance of black color stretch film was largely difference of two stretch films. This study was carried out to measure qualities of fresh rice straw wrapping silage by softening processing of fresh rice straw and colors effects of wrapping stretch film. The analyzed factors were the light transmittance of stretch film, variation of the temperature in fresh rice straw round bale and qualities of the silage in crude protein, ADF, NDF, organic acid, etc. It was difficult to find in this study the colors effects of stretch film on silage qualities by the silage wrapping. But, when make fresh rice straw wrapping silage, wrapping silage fermentation effect goes well more if handle softening the fresh rice straw.

• Journal of Welding and Joining
• /
• v.18 no.6
• /
• pp.68-73
• /
• 2000

In case of overalyered wrapping roll, beadmark shape appear at wrapping roll surface due to irregular wear between weld bead. Irregular wear of this is caused by difference of hardness between weld bead. This study aims at investigating which matrix is good for removing of beadmark at wrapping roll surface. So, we make specimen with martensitic matrix and austenitic matrix. The overlayered alloys were deposited 4 times on a SS41 steel plate using self-shielding flux cored arc welding method. Difference of hardness between weld bead of specimen with matrix of martensite was higher than specimen with matrix of austenite both as-welded and after heat treatment. Therefore, austenitic matrix is between than martensitic matrix for removing of beadmark of wrapping roll surface.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2002.05a
• /
• pp.458-461
• /
• 2002

This study presents development of a machine for shrink wrapping of cans or drink bottles with thermoplastic films. The accurate position-control, the safety factor of chains, the reduction-ratio of the chain and gear, the appropriate heating temperature for banding vinyl are discussed for the optimum shrink wrapping M/C design.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.33 no.12
• /
• pp.1883-1896
• /
• 2009

This paper explores the use of Korean wrapping cloths (bojagi) in the late Joseon period and the types of decorations applied to them. Korean wrapping cloths called bojagi are pieces of cloths used by households of all social classes for practical purposes such as wrapping presents and covering food. In addition to the basic purposes, the making of bojagi was also an activity to express the down-to-earth wishes and the satisfaction of creation by the designer. With regard to the decorative feature of Korean wrapping cloths, five types of, patchwork, embroidered, painted, printed, and oiled-paper wrapping cloths, were examined. The patchwork wrapping cloths (jogakbo) show the frugality of Joseon women in addition to the well-developed composition skill of lines and colors. The embroidered wrapping cloths were prepared for special rituals and ceremonies such as weddings. Painted wrapping cloths were decorated with a Chinese-colors technique (called dangchae) or sometimes with black ink painting. For printed wrapping cloths, various sizes of woodblock printings and roller printings were used. Although monotone black ink was the main color applied to the printing, there was also wrapping cloths made from chintz having brilliant fast colors. Oiled-paper wrapping cloths called sikjibo were in use only for covering food. Cut-out work was employed to decorate it.

• Proceedings of the KWS Conference
• /
• 2000.10a
• /
• pp.216-218
• /
• 2000

In case of hardfaced wrapping roll, beadmark shape appear at wrapping roll surface due to irregular wear between weld bead. Irregular wear of this is caused by difference of hardness between weld bead. This study aims at investigating which matrix is good for removing of beadmark at wrapping roll surface. So, we make specimen with martensitic matrix and austenitic matrix. The hardfacing alloys were deposited 4 times on a SS41 steel plate using self-shielding flux cored arc welding method. Difference of hardness between weld bead of specimen with matrix of martensite was higher than specimen with matrix of austenite both as-welded and after heat treatment. Therefore, austenitic matrix is better than martensitic matrix for removing of beadmark of wrapping roll surface.

• Textile Coloration and Finishing
• /
• v.22 no.1
• /
• pp.37-42
• /
• 2010

ABS/MWNT nanocomposites were prepared by using MWNT wrapped with SAN through melt compounding. Effect of wrapping of MWNT by SAN on the morphology, mechanical and electrical properties of ABS/MWNT were analyzed. It was found that SAN could wrap MWNT effectively indicated by the increased thickness after wrapping, which is presumably due to helical structure of polyacrylonitrile component in a block copolymer of SAN. MWNT was observed to be dispersed more evenly in ABS matrix by SAN wrapping, which resulted in improved tensile properties of the composites. On the other hand, there was little effect on the impact strength and electrical properties of ABS having inherently high impact strength.

• Steel and Composite Structures
• /
• v.15 no.6
• /
• pp.623-643
• /
• 2013

Concrete filled steel tubular members (CFST) become a popular choice for modern building construction due to their numerous structural benefits and at the same time aging of those structures and member deterioration are often reported. Therefore, actions like implement of new materials and strengthening techniques become essential to combat this problem. The application of carbon fibre reinforced polymer (CFRP) with concrete structures has been widely reported whereas researches related to strengthening of steel structures using fibre reinforced polymer (FRP) have been limited. The main objective of this study is to experimentally investigate the suitability of CFRP to strengthening of CFST members under flexure. There were three wrapping schemes such as Full wrapping at the bottom (fibre bonded throughout entire length of beam), U-wrapping (fibre bonded at the bottom throughout entire length and extended upto neutral axis) and Partial wrapping (fibre bonded in between loading points at the bottom) introduced. Beams strengthened by U-wrapping exhibited more enhancements in moment carrying capacity and stiffness compared to the beams strengthened by other wrapping schemes. The beams of partial wrapping exhibited delamination of fibre and were failed even before attaining the ultimate load of control beam. The test results showed that the presence of CFRP in the outer limits was significantly enhanced the moment carrying capacity and stiffness of the beam. Also, a non linear finite element model was developed using the software ANSYS 12.0 to validate the analytical results such as load-deformation and the corresponding failure modes.

• Steel and Composite Structures
• /
• v.44 no.6
• /
• pp.845-865
• /
• 2022

In this study, the performance of shear deficient reinforced concrete (RC) beams with rectangular cross-sections, which were externally bonded reinforced (EBR) with high strength CFRP and GFRP strips composite along shear spans, has been experimentally and analytically investigated under vertical load. In the study, the minimum CFRP and GFRP strips width over spacing were considered. The shear beam with turned end to a bending beam was investigated by applying different composite strips. Therefore various arising in each of strength, ductility, rigidity, and energy dissipation capacity were obtained. A total of 12 small-scaled experimental programs have been performed. Beam dimensions have been taken as 100×150×1000 mm. Four beams have been tested as unstrengthened samples. This paper focuses on the effect of minimum CFRP and GFRP strip width on behaviours of RC beams shear-strengthened with full-wrapping, U-wrapping, and U-wrapping+longitudinal bonding strips. Strengthened beams showed significant increments for flexural ductility, energy dissipation, and inelastic performance. The full wrapping strips applied against shear failure have increased the load-carrying capacity of samples 53%-63% interval rate. Although full wrapping is the best strengthening choice, the U-wrapping and U-wrapping+longitudinal strips of both CFRP and GFRP bonding increased the shear capacity by 53%~75% compared to the S2 sample. In terms of ductility, the best result has been obtained by the type of strengthening where the S5 beam was completely GFRP wrapped. The experimental results were also compared with the analytically given by ACI440.2R-17, TBEC-2019 and FIB-2001. Especially in U-wrapped beams, the estimation of FIB was determined to be 81%. The estimates of the other codes are far from meeting the experimental results; therefore, essential improvements should be applied to the codes, especially regarding CFRP and GFRP deformation and approaches for longitudinal strip connections. According to the test results, it is suggested that GFRP, which is at least as effective but cheaper than CFRP, may be preferred for strengthening applications.

• Journal of the Korean Graphic Arts Communication Society
• /
• v.30 no.1
• /
• pp.71-81
• /
• 2012

A research framework and hypothesis were established for analysing layout-factors of bus wrapping which influence on brand attitude. 130 questionnaire were distributed and 123 copies were retreated at metropolitan area. SPSS 12.0 was used for frequency analysis, factor analysis, and reliability analysis. For testing hypothesis multi-regression analysis were utilized. Attention, readability, explicitness, formativeness, creativity are partially significant to establish brand attitude. Attention and readability are insignificant, while explicitness, formativeness, creativity are significant to establish brand attitude. The most effective independent variables are creativity, and explicitness and formativeness are followed. In particular sensual, original, fresh layout of bus wrapping are highly significant.

• Journal of Korean Foot and Ankle Society
• /
• v.10 no.1
• /
• pp.109-112
• /
• 2006

Management of postoperative tarsal tunnel syndrome is a perplexing problem to the surgeons. Autogenous vein wrapping graft is a effective method to decompress the tarsal tunnel. We treated 2 cases of postoperative tarsal tunnel syndrome with autogenous saphenous vein wrapping graft technique, and could get good results. Autogenous vein wrapping graft seems to be a good technique for tarsal tunnel syndrome with severe adhesion, particularly after surgery, and postoperative nerve adhesion can be prevented.