• Journal of the Korean Society of Tobacco Science
• /
• v.24 no.2
• /
• pp.107-112
• /
• 2002

There are many combination with the porosity of tipping paper and plug wrap for a design of ventilation rate of cigarette. This study was carried out to determine the effect of a design of permeability of tipping paper and inner or outer of plug wrap on the ventilation rate of cigarette with constant pressure drop in column part and filter part. Our results indicated that the higher the plugwrap porosity, the higher the ventilation rate and the less variable of cigarette in case of mono filter. But, in case of duel filter, the ventilation rate of cigarette was depended on the manufacturing method of filter plug, even though using the same porous plug wrap on inner and outer of filter. We also found that the porosity of outer plug wrap was more effect on the ventilation rate than the porosity of inner plug wrap. As the high porosity of inner plug wrap compared with the porosity of outer plug wrap, the less variable of ventilation rate of cigarette in any combination of the porosity of plug wrap. When we used the higher porous outer plug wrap than inner plug wrap, the ventilation rate of cigarette was high. Also, the higher the inner plug wrap porosity, the less variable of ventilation rate of cigarette.

• THE INTERNATIONAL COMMERCE & LAW REVIEW
• /
• v.20
• /
• pp.129-150
• /
• 2003

Software license agreements, to be useful in the mass market, could not be individually negotiated, and had to be standardized and concise. The software license agreement needs to be presented to the licensee-users in a fashion that would allow for mass distribution of software, also for it to enforceable, that would draw the users' attention to the terms and conditions under which the publisher allowed the use of the software. These needs have been accomplished, with or without fail, through so called the "shrink-wrap licenses" Shrink-wrap licenses purpose to transfer computer softwares to their users by defining the terms and conditions of use of the software without implicating the "first sale doctrine" of the Copyright Act. These shrink-wrap licenses have become essential to the software industry. However, in USA, the law applicable to these licenses has been unclear and unsettled. Courts have struggled to develop a coherent framework governing their enforceability. Meanwhile, the National Conference of Commissioners on Uniform State Laws ("NCCUSL") in USA promulgated the Uniform Computer Information Transaction Act ("UCITA") governing contracts for computer information transaction on July 29, 1999. One clear objective of UCITA was to settle the law governing the enforceability of shrink-wrap licenses. In these respects, this paper first introduces the various forms that shrink-wrap licenses take(at Part II. Section 1.), and explains the main advantages of them(at Part II. Section 2.) Here it shows how shrink-wrap licenses value themselves for both software publishers and users, including that shrink-wrap licenses are a valuable contracting tool because they provide vital information and rights to software users and because they permit the contracting flexibility that is essential for today's software products. Next, this paper describes the current legal framework applicable to shrink-wrap licenses in USA(at Part III). Here it shows that in USA the development of case law governing shrink-wrap licenses occurred in two distinct stages. At first stage, judicial hostility toward shrink-wrap licenses marked such that they were not enforced pursuant to Article 2 of the Uniform Commercial Code. At second stage, courts began to recognize the pervasiveness of shrink-wrap licenses, their indispensability to the rapidly expanding information technology industry, and the urgent need to enforce such licenses in order to maintain low prices for consumers of computer hardware or software, resulting in the recognition of shrink-wrap licenses. Finally, in view of the importance of UCITA, this paper examines how it will affect the enforceability of shrink-wrap licenses(at Part IV). The drafters of UCITA, as well as the scholars and practitioners who have criticized it, agree that it validates shrink-wrap licenses, provided certain procedural protections are afforded to purchasers. These procedural protections include the licensee end-user must (i) manifest his assent to the shrink-wrap license, (ii) have an opportunity to review the shrink-wrap license, (iii) have a right to return the product without costs.

• Journal of the Korean Society of Tobacco Science
• /
• v.23 no.1
• /
• pp.60-64
• /
• 2001

The variability of a ventilated filter cigarette depends on the details of its construction and one properties of its components and the variations in filter ventilation is effected by many factors such as tobacco column pressure drop, filter pressure drop, tipping paper and plug wrap permeability, and vent position. In this study, the effects of combination of tipping paper and plug wrap on filter ventilation of cigarettes were studied for the target ventilation level under the specific tobacco column and filter tip in order to reduce the variation of filter ventilation. When Nicolas Baskevitch\`s equation on filter ventilation was used to try out Monte Carlo Simulation, at the combination where tipping paper permeability is high and plug wrap permeability is low, even the small change in tipping paper and plug wrap permeability showed high variation of target ventilation level. Also, according to the analysis data of filter ventilation in cigarettes designed at the level of 45% filter ventilation by the combinations with tipping paper and plug wrap, the variation in cigarette filter ventilation was increased as increasing tipping paper permeability and decreasing plug wrap permeability. As the results of this study, the variation of filter ventilation can be reduced by increasing plug wrap permeability/tipping paper permeability ratio in the cigarette design, considering 2-3% of tipping paper permeability variation(%CV) and about 10% of plugwrap permeability variation.

• Journal of the Korean Society of Tobacco Science
• /
• v.24 no.1
• /
• pp.60-66
• /
• 2002

The ventilation rate of a ventilated filter cigarette depends on the details of its construction and on the properties of its components such as tobacco column pressure drop, filter pressure drop, tipping paper and plug wrap permeability, and vent position. Also, It was affected by the condition of adhesion of glue between tipping paper and plug wrap. This study was carried out to find the effect of surface properties of tipping paper and plug wrap, and a characteristics of glue on the ventilation rate of cigarettes. Our results indicated that the surface properties of tipping paper and plug wrap affected on the ventilation rate of cigarette. Also, the variation of ventilation rate was affected by the surface properties of tipping paper and the size of glue particles. We also found that the surface properties of tipping paper and plug wrap, and the emersion size of glue were the major factors to concern in the design for materials of cigarettes.

• Asian Pacific Journal of Cancer Prevention
• /
• v.16 no.7
• /
• pp.2975-2979
• /
• 2015

Background: Telomere length is closely associated with cellular radiosensitivity and WRAP53 is required for telomere addition by telomerase. In this research we assessed radiosensitivity of laryngeal squamous cell carcinoma Hep-2 cell lines after WRAP53 inhibition, and analyzed the molecular mechanisms. Materials and Methods: phWRAP53-siRNA and pNeg-siRNA were constructed and transfected into Hep-2 cells with lipofectamine. Expression of WRAP53 was analyzed by RT-PCR and Western-blottin, radiosensitivity of Hep-2 cells was assessed colony formation assay, and the relative length of telomeres was measured by QPCR. Results: The data revealed that the plasmid of phWRAP53-siRNA was constructed successfully, and the mRNA and protein levels of WRAP53 were both obviously reduced in the Hep-2 cell line transfected with phWRAP53-siRNA. After Hep-2 cells were irradiated with X-rays, the $D_0$ and $SF_2$ were 2.481 and 0.472, respectively, in the phWRAP53-siRNA group, much lower than in the control group ($D_0$ and $SF_2$ of 3.213 and 0.592) (P<0.01). The relative telomere length in the phWRAP53-siRNA group was $0.185{\pm}0.01$, much lower than in the untreated group ($0.523{\pm}0.06$) and the control group ($0.435{\pm}0.01$). Conclusions: Decreasing the expression of WRAP53 using RNA interference technique can enhance the radiosensitivity of Hep-2 cell lines by influencing the telomere length. WRAP53 is expected to be a new target to regulate the radiosensitization of tumor cells.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2005.06a
• /
• pp.1901-1905
• /
• 2005

This Paper describes the mathematical modeling and control of the tension and the speed of moving Bio-wrap in a wrap winding machine. In winding process, important control specifications include the regulation of wrap tension and velocity. In this research, a tension and velocity model has been developed for winding processes. A prototype winding system has been constructed, and the controller has been implemented in a real time PC-based environment. The tension control system is modeled a MIMO of the two-input and four-output system. The performance of the modeled system has been evaluated via simulation using MATLAB and experiments.

• Journal of IKEEE
• /
• v.13 no.2
• /
• pp.126-131
• /
• 2009

To overcome short channel effects, wrap-around field effect transistors have drawn a great deal of attention for their superior electrostatic coupling between the channel and the surrounding gate electrode. In this paper, we introduce a bottom-up technique to fabricate a wrap-around field effect transistor using silicon nanowires as the conduction channel. Device fabrication was consisted mainly of electron-beam lithography, dielectrophoresis to accurately align the nanowires, and the formation of gate electrode using electrochemical deposition. The electrolyte for electrochemical deposition was made up of non-toxic organic-based solution and liquid nitrogen was used as a method of maintaining the shape of polymethyl methacrylate(PMMA) during the process of electrochemical deposition. Patterned PMMA can be used as a nano-template to produce wrap-around gate nano-structures.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2011.05a
• /
• pp.58-58
• /
• 2011

The Texas Commission on Environmental Quality(TCEQ) WAM(Water Availability Modeling) System consists of the generalized Water Rights Analysis Package(WRAP) river/reservoir system water management simulation model, 22 sets of WRAP hydrology and water rights input files for the 23 river basins of Texas, geographic information system tools, and other supporting databases. The WRAP/WAM modeling system, as routinely applied since the late 1990s, has not included consideration of water quality. Recently developed WRAP-SALT(Water Rights Analysis Package) is designed primarily for computing concentration frequency statistics and supply reliability indices at locations of interest in a river system for alternative water development and management scenarios. Though motivated primarily by natural salt pollution, WRAP-SALT water quality modeling features are applicable to essentially any conservative water quality constituent. The Brazos River studies discussed in this paper focus on total dissolved solids, though the available observed data also includes chloride and sulfate which can be modeled as individual constituents. The WRAP-SALT salinity input file contains loads or concentrations of salinity inflows during each month of the hydrologic period-of-analysis and reservoir storage at the beginning of the simulation. The WRAP-SALT model computes salt loads and concentrations for each control point of a river/reservoir system for inflows and outflows during the month and end-of-month reservoir storage for each month of the hydrologic period-of-analysis, for given loads entering the system. River reaches connect control points. The mass balance algorithms proceed from upstream to downstream, with outflow from one river reach contributing to inflow to the next downstream reach. In a given month, for each control point in sequence, the inflow loads are first computed. Loads and concentrations of outflows and reservoir storage at the control point are then determined. Complete mixing during the month is assumed at locations without reservoir storage.

• Journal of The Korean Society of Grassland and Forage Science
• /
• v.26 no.3
• /
• pp.133-138
• /
• 2006

This experiment was conducted to determine the effect of wrap color on the quality of round baled grass silage at experimental field of Grassland and Forages Division, National Livestock Research Institute, RDA, Suwon from 1997 to 1998. The experiment was consist of randomized block design with three replications. The treatments were three wrap color(white, black and light green). Wrap color did not affect chemical composition. Fiber components(ADF and NDF) of all silages after 2 months were higher than those of forages at ensiling. Among tested wrap colors, white color wrap resulted in lower pH than others (p<0.05) but, there was no significant difference between black and light green color. Dry matter content of light green color was the highest among warp colors, but there was no signifiant difference (p<0.05). Acetic and butyric acid contents of all plots. were not found significant difference among wrap color and wrap color did not influence lactic acid and organic acid concentration. The effect of wrap color on the quality grade and DM loss also were not found significant difference. Results of this study indicate that wrap color does not influence the quality of silage.

• Journal of Biosystems Engineering
• /
• v.29 no.1
• /
• pp.1-8
• /
• 2004

In order to solve the shortage of roughage supply for dairy farm in Korea, winter cereal forage production after harvesting of rice in the fallow paddy field was studied. Two parts are already reported at the previous paper - One was the model development of the mechanized production, and the other was the study of feasibility of the model and its desirable direction in Korea. In this study, the model system is applied for a winter cereal wrap silage production model to practice in Kyungbook National University farm on 3ha scale for 3 years. Results of the research are summarized as follows; It takes 2 or 3 working days to process the wrap silage in middle of May in Daegu region. Also, not much particular problem can be found during the application test of mechanized wrap silage production. Field capacity and field efficiency are estimated to be 0.6-0.85㏊/h and 50-70% in mowing, 1.1∼1.7㏊/h and 52∼80% in tedding and raking, 0.6∼1.1㏊/h and 25∼45％ in baling and 0.5∼0.57㏊/h and 75∼85% in wraping, respectively. Total production cost is estimated to be 1,257won/kg-TDN in oversowing and wrap-silage harvest in 1.6㏊ working area. As a result, large scale field is recommended to produce the wrap silage in order to maximize the field capacity.