• 한국항공우주학회지
• /
• 제32권3호
• /
• pp.17-21
• /
• 2004

테이프래핑 구조물은 유도무기의 노즐 구조에 많이 사용되고 있는데 주로 주자직 복합재료를 띠모양으로 이은 다음 이를 맨드럴에 경사각을 가지게 감는 방법으로 제작된다. 적층된 구조물은 고압의 오토클레이브나 하이드로 클레이브에서 성형된다. 테이프래핑 구조물은 적층 형태가 일방향 복합재료의 경우와는 다르며, 제작 시 주어진 경사각을 고려한 해석이 필요하다. 본 연구에서는 테이프래핑 구조물에 대한 해석 기법을 고찰하였다. 먼저 4점 굽힘 실험에 대한 유한요소 해석 결과와 실험 결과를 비교함으로써 테이프래핑 구조물의 모델링 기법의 타당성을 검증하였다. 4점 굽힘 실험의 파단 하중과 이방성 파단 판정식의 결과를 비교함으로써 최적의 이방성 파단 판정식을 확인하였다.

• 복식문화연구
• /
• 제29권5호
• /
• pp.735-746
• /
• 2021

Uiwon-gun (1661-1722) and Sim Ikchang (1652-1725) were people of the upper classes of the Joseon Dynasty, who's belts woven with thread were found in their graves. The purpose of this study is to find a term suitable for the belts of these two people and to reveal the characteristics of the two belts and decipher the 8-character text marked on Shim Ikchang's belt to understand its meaning. The terms used during the Joseon Dynasty related to woven belts include "Gwangdaho", "Daeja", "Bunhapdae", "Sagagda", "Bangseungah", and "Samunjikdae". Among these terms, "Gwangdahoe" is the most suitable to indicate the belts of for both belts. The belts are made of a silk fabric of narrow width. The size of Uiwon-gun's belt is 2.8×199cm, and because it is folded in half lengthwise and sewn, the original width is 8cm. It was woven in the imitation gauze technique. Sim Ik-chang's belt measures 10.5×258cm and is decorated with a woven net at the end. There are water and mountain patterns on both ends of the belt, with 11 lines of flower patterns equally spaced between. The belt is damask, the inscription part is made of brocade with letters expressed in golden thread. The meaning of the inscription is "Made in Hanbu. May you live a long and healthy life".

• 한국전산구조공학회:학술대회논문집
• /
• 한국전산구조공학회 2006년도 정기 학술대회 논문집
• /
• pp.15-20
• /
• 2006

Real time health monitoring system was studied to detect the . generation of defects in the composite structures during service life. The PZT sensors were embedded into the woven-glass/phenol composite plate during the fabrication. VARTM (Vacuum Assisted Resin Transfer Molding) process were used to fabricate the composite plate. A Teflon tape was embedded between glass fiber layers to mimic delamination induced during service. Normalized maximum amplitude and energy analyses were used for the acquired signals. Both amplitude and energy of acquired signals were extremely sensitive to the delamination. Therefore, it was successful to detect and to locate the defects in composite plate by monitoring signals from sensors and using the proposed method.

• 한국안전학회지
• /
• 제34권6호
• /
• pp.1-6
• /
• 2019

Carbon fiber has excellent specific strength, corrosion resistance and heat resistance. And p-Aramid fiber has high toughness and heat resistance and high elasticity, and is used in various fields such as industrial protective materials, bulletproof helmets and vests, as well as industrial fields. However, carbon fiber is relatively expensive, and is susceptible to brittle fracture behavior due to its low fracture strain. On the other hand, the aramid fiber tends to decrease in elastic modulus and strength when applied to the epoxy matrix, but it is inexpensive and has higher elongation and fracture toughness than carbon fiber. Thus the twill hybrid carbonaramid fiber reinforced composite laminate composite was investigated for a delamination fracture toughness under Mode I loading by 2 kinds of MBT and MCC deduction. The specimen was fabricated with 20 hybrid fabric plies. The initial crack was made by inserting the teflon tape in the center plane with a₀/W=0.5 length. The results show that SERR(Strain Energy Release Rate) as the critical and stable delamination fracture toughness were 0.09 kJ/㎡, 0.386 kJ/㎡ by MBT deduction, and 0.192 kJ/㎡, 0.67 kJ/㎡ by MCC deduction, respectively.