• Journal of the Korean Institute of Landscape Architecture
• /
• v.40 no.2
• /
• pp.130-137
• /
• 2012

This research evaluated the effectiveness of organic matter ratios in substrate and mulching materials under mn-irrigated condition green roofs by measuring the effects on growth of Liatris spicata. Four mulching materials were installed, i. e. nun-mulched control(CON), volcanic ash soils(VAS), non-woven black fabric mat(NBM) and pine bark(PAK). Three levels of organic maller volume percentage in an amended soil were evaluated, amended soil: organic matter=100:0($A_1O_0$), amended soil: organic matter=80:20($A_4O_1$) and amended soil: organic matter=50:50($A_1O_1$). Plant height, number of leaves, diameter of flower stalk, number of florets, chlorophyll contents, shoot fresh and dry weight were recorded from April to September, 2010, and survival rate was examined on May 2011 of the following year. In the $A_1O_0$, the number of leaves, number of florets and chlorophyll contents were higher in Liatris spicata grown on NBM than other mulching treatments. Especially, plant height, shoot fresh and dry weight were significantly higher. However, it resulted the lowest survival rate than other mulching treatments. 2. In the $A_4O_1$, the plant height, number of leaves, number of florets, shoot fresh and dry weight were higher than other mulching treatments, but there was no significant difference except for the plant height of Liatris spicata grown on NBM. The survival rate was decreased by 40~60%, compared with $A_1O_0$, after overwintering. 3. In the $A_1O_1$, the plant height, number of leaves, diameter of flower stalk, number of florets, chlorophyll contents, shoot fresh and dry weight were slightly higher than other mulching treatments, but there was no significant difference from Liatris spicata grown on NBM and VAS. The survival rate was observed by 0% over all mulching treatments after overwintering. Therefore, the non-woven black fabric mat(NBM) promoted the Liatris spicata's growth and flowering compared with other mulching treatments. However, the survival rate was decreased significantly, and the organic matter ratios were increased after overwintering under non-irrigated green roofs.

• Horticultural Science & Technology
• /
• v.31 no.1
• /
• pp.32-37
• /
• 2013

Relationships among climate changes, early frost, and fruit growth were studied during the final month to harvest of late-maturing 'Fuyu' persimmon (Diospyros kaki) to assess the changes in fruit characteristics during this critical period. The heavy frost on Nov. 16 defoliated more than 70% of the leaves, but with little damage on the fruits. However, all the leaves were defoliated by the heavy frost on Nov. 20, and all the fruits were cold-damaged by $-3.3^{\circ}C$ on Nov. 21. Fruit weight increased by 8-25 g per week from Oct. 25 (142 days after full bloom) to Nov. 15, reaching to 250 g, but it decreased by 3-4 g per week after the frost. Hunter a value of fruit skin gradually increased until the last harvest on Nov. 29 with a temporary halt in early Nov. when temperature was high, whereas fruit firmness rapidly decreased after the frost on Nov. 21. Fruit soluble solids were $15.7-16.1^{\circ}Brix$ for the final month. When some branches were covered with non-woven fabrics to avoid direct contact with frost, the fruits on the branches were not visually damaged by the low temperature although 40-60% of their leaves were defoliated on Nov. 16. However, low temperature on Nov. 20 and 21 defoliated all the leaves, causing cold damage on the fruits. There was a highly significant correlation between the fruit diameter and its weight ($R^2$ = 0.73-0.91). So, the regression equations could be used to estimate weight from diameter of the fruits sampled from the branches with the non-woven fabrics. The calculated fruit weight reached to a maximum of 240 g on Nov. 15. Daily increases in fruit weight were 1.1-2.5 g from Oct. 25 to 31, 1.9-3.5 g from Oct. 31 to Nov. 7, and 1.4-1.6 g from Nov. 7 to 12. However, fruit weight decreased by 0.3-1 g per day after the cold damage on Nov. 21. The results indicate that the most appropriate harvest time could be dependent on relationship of fruit growth to climate.

• Korean Chemical Engineering Research
• /
• v.59 no.4
• /
• pp.548-556
• /
• 2021

This study was conducted to investigate the applicability of lignocellulosic fiber and coconut shell activated carbon (CSA) for the production of a particulate matter (PM)-reducing air-filter as raw materials to solve the environmental problems of non-woven fabrics. CSA had a good potential to use as a raw material of air-filter for reducing volatile organic compounds as well as noxious metals, and reduction capability of the CSA was 5 times higher than that of wood fiber. Natural adhesives formulated with proteinaceous wastes mostly were applied successfully to fabricate air-filters with the shape of fiberboard. The air-filter fabricated with the minimum target density of 200 kg/m³ and the maximum CSA-content of 40 wt% in fiberboard had a good manageable strength. However, the fiberboard filters was required to make vent-holes for improving an air-permeability of the filters. Size of the CSA particles was adjusted to greater than 2 mesh with the consideration of strength and formability of the fiberboard. Three-layers fiberboard that only wood fiber and the mixture of wood fiber and CSA were formed in the surface and middle layers, respectively, was determined to the optimal condition for the production of air-filters. In addition, traditional Korean paper handmade from mulberry trees (TKP) showed a good PM-reducing property as an air-filter. It is concluded that air-filtering set composed of fiberboard with vent-holes and TKP instead of conventional air-filters made with non-woven fabrics can be used as a filter for reducing the concentrations of PM, VOC and noxious metals existed in indoor and outdoor spaces.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.30 no.3 s.151
• /
• pp.447-457
• /
• 2006

The purpose of this study is to document and preserve an unidentified textile purchased at a flea market. This study object is important because it is one of the very rare silk insert series from 1930s which were created for commercial use(as inclusion in cigarette packages). The investigation was conducted by researching the limited publications that discuss silk inserts, visiting many sites on the internet that offer such inserts for sale or catering to the collectors of these silk inserts, and especially visiting the collection of silk inserts, named the J.R. Burdick Collection, at the Metropolitan Museum of Art, New York. Several pieces matched the patches used in the study piece. But Buidick's description on time frame(1912-1915) did not indicate the full range of production of silk inserts. After the identification of object, the conservation treatment was carefully done using adhesives. The results of this study can be summarized as follows; 1. The silk inserts of the study object were included as promotions by some company owned by the American Tobacco Company, probably at some time between 1934 and 1939. 2. The initial stage in the conservation treatment was mechanical surface cleaning using a vacuum cleaner. After vacuuming, humidification was conducted to reduce creases in the top of the object. The damaged areas were backed with stabiltax coated with a solution of Elvace 45675 since the fiber of this object was too deteriorated. 3. Adhesive treatments using Elvace showed satisfactory results: flexibility, strength, no damaging effects on the study object, removability without damaging the object.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.17 no.2
• /
• pp.247-264
• /
• 1993

This study deals with the manufacturing of the foundation garments for the well-balanced somatotype of the Korean middle-aged womenhood. In order to get hold of the different somatotypes, a survey of a total of 134 middle-aged women in Kwangju area, ranging in their age from 45 through 59 was made. The statistical methods used for the analysis of the basic data were the Pearson's correlation coefficient, Anova, Cluster analysis and Stepwise. Emphasis of the try-on test was placed on (1) the comparison of anthropometric data before and after trying on the foundation garments, (2) sensory evaluation, (3) a rating on fit and performance, (4) the comparison by means of photograph. The conclusions obtained are as follows : 1) The 134 women sampled and measured were classified into the five groups of somatotype : the 52 women (34%) belong to Cluster 1 ; the 22 women(14.5%) belong in Cluster 2 ; the 12 women(7.9%) belong in Cluster 3 ; the 15 women(9.9%) belong in Cluster 4 ; the 33 women(27.7%) belong to Cluster 5. 2) As for the characteristics of the foundation garment design, the V-shaped neckline and chest dart was used. The adjust point is right above the perineum point. The foundation garment length is as far as trochanteric point. The materials used are cotton/polyurethane, lace, 100%cotton. The materials used for corrections were the sponge pad for the chest, and non-woven fabric pad for the back, shoulder and the hip. 3) The comparison of the anthropometric data of the subject when dressed in foundation garments showed a significant difference in bust point height, in bust point length and in nipple-ta-nipple breadth, which proves the foundation garments to be effective in correcting such part as the chest, the hip and the abdomen. 4) As considered in terms of the sensory evaluation, the item except for the shoulder and the armhole coincided with each other in the mean value and in the composite reliability coefficient, which also proves the foundation garments to be effective. 5) Subjects were satisfactory on fit, performance, design, of the foundation garment, and their changed appearance. 6) In the case of the comparison through the photographs, the silhouettes of all the five women subjects were found effectively to be balanced.

• Journal of Bio-Environment Control
• /
• v.7 no.3
• /
• pp.259-267
• /
• 1998

This study was carried out to investigate the effect of mulching materials on the fruit quality of Miyagawa Early Satsuma Mandarin in the plastic house. The mulching time was 10 days after water irrigation breakage. The mulching materials used, in order of decreasing light reflectivity, were; micro-perforated vinyl sheets, non-woven fabric film, porous black P.E. film and non-mulching(control). Peel coloration by a values in the treatment of the micro-perforated vinyl sheets showed a 6.93 increase over the control group. The a/b values were similar to this trend, but there were no significant difference among the mulching treatment groups. The glucose level of fruit juice was much higher in the mulching treatment groups as compared with that of the control group, but there was no significant difference among the mulching treatments. Fructose content in the treatment of the micro-perforated vinyl sheets a 0.31mg%.m $L^{-1}$ increase over the control group. This group also showed a 1.36%.m $L^{-1}$ increase in sucrose and a similar increase trend in total sugar. The Brix value was 0.9 $^{\circ}$Brix higher in the micro-perforated vinyl sheet group(12.4 $^{\circ}$Brix) than in the control group(11.5 $^{\circ}$Brix) which result in a significant increase with micro-perforated vinyl sheet usage. However, the acidity level did not differ significantly among mulching treatments.

• Journal of Fashion Business
• /
• v.2 no.2
• /
• pp.85-96
• /
• 1998

This is a study on the revitalization of the fashion design studios (planning and production companies of clothing) in compliance with the request from the Small and Medium Business Administration. It's purpose is to strengthen the competence of the petty company and eventually frourish the Korean Fashion Business. The research method to conduct this study consists of two parts. First part is the research on the domestic industry mainly by questionaire, interviews and literature reviews. After making out the directory of the design studios (total of 700), 85 studios were selected for the questionaire. And by interviewing them, data with more depth was obtained. The second part is the research of the foreign cases. In the case of Japan, survey was done on the spot. However, in the case of Italy, literature review and interview with specialists were made. Also in order to higher the efficiency of the study an advisory committee and final explanatory meeting was carried into effect. This study has started first by looking into the significance and function of the fashion design studios. Then, a full scale examination was made centering around the questionarie of the present conditions of the companies. General conditions were first observed. Then the survey was done by grouping the industry by the industrial classifications such as woven, knit, leather mustang fur and fashion accesaries. The problems these companies face are that they are petty in scale and in lack of speciality, professional training, government support. Also, they are without an association or an organization that speaks for them and they face problems while doing business with others. Cases of Japan and Italy were surveyed as the example of the advanced nations. In the case of Japan, development of planning and management company, Fashion Soft House, was analyzed. Italy for instance, the function of the studios was looked into centering around the silk complex, Como, knit product complex, Capri. Also, precedent cases of brands and developing factor of the fashion industry was examined. Finally, on the basis of the result of the study, a plan to revitalize the fashion design studios was presented centering around the strategic planning, management, production, developing of talent, improvement of relationship between business acqaintance, and the support policy of the government.

• Journal of the Korean Society of Fisheries and Ocean Technology
• /
• v.31 no.4
• /
• pp.362-371
• /
• 1995

This study describes with the sinking behaviour for the purse seine. The experiment was carried out using three model purse seines of knotless netting. The nettings were woven in same leg length(10.5mm) of polypropylene 170 denier, polyamide 210 denier and polyester 250 denier two thread ply twine, each of the seines were named PP seine, PA seine and PES seine. Dimension of Purse seine models were 420cm for corkline and 85cm for seine depth, each models rigged 65.8g, 50.6g and 35.8g(weight in water) of lead for a leadline, seine models will have the same weight in water. Experiments carried out in the observation channel in a flume tank under still water conditions. Sinking motion was recorded by the one set of TV-camera for VTR, and reading coordinate carried out by the video digitization system. The results obtained were as follows: 1) Netting bundle for PP seine was existence on the surface of the water, spread out a netting by sinking force of sinkers. 2) Netting bundle for PES seine was existence in the middle of corkline and leadline. 3) Average sinking speed of seine margin was fastest for 10.7cm/s of PP seine, followed by 9.7cm/s of PA and 9.2cm/s of PES seines. 4) In all seines, the force of horizontal movement for the seine setting was values of ranged in disregard.

• Biomedical Science Letters
• /
• v.11 no.1
• /
• pp.63-69
• /
• 2005

We investigated the changes of fibrinolytic and antioxidative activities of wild or cultivated Codonopsis lanceolata, which were packed in woven polypropylene (WP) film or low density polyethylene (LDPE) film and stored for 0, 15, and 30 days at refrigerated $(2\~4^{\circ}C)$ or room $(l8\~20^{\circ}C)$ temperature (So we have 16 samples, and wrote them as the abbreviated words such as W-WP-RE-15, W-WP-RO-15, W-LDPE-RE-15, W-LDPE-RO-15, W-WP-RE-30, W-WP-RO-30, W-LDPE-RE-30, W-LDPE-RO-30, C-WP-RE-15, C-WP-RO-15, C-LDPE-RE-15, C-LDPE-RO-15, C-WP-RE-30, C-WP-RO-30, C-LDPE-RE-30, C-LDPE-RO-30). Fibrinolytic activity of fresh Codonopsis lanceolata cultivated in the mountain or field were 0.8 unit (plasmin unit/ml) or 7.3 units, respectively. In descending order, the activities of wild Codonopsis lanceolata stored for 15 days were as followed; LDPE-RE (0.70 unit), WP-RO (0.52 unit), WP-RE (0.45 unit), and LDPE-RO (0.30 unit). After 30 days, fibrinolytic activities of them decreased to 0.47 unit (LDPE-RE), 0.28 unit (WP-RO), 0.21 unit (WP-RE), and 0.30 unit (LDPE-RO). Considering from the point of fibrinolytic activity, the optimal storage condition of wild Codonopsis lanceolata was packing with LDPE film and storing at $4^{\circ}C$. The change of fibrinolytic activities of Codonopsis lanceolata cultivated in the field revealed the similar trend as wild samples, but the fibrinolytic activities of 30 days-stored samples were maintained better than the wild Codonopsis lanceolata. Fibinolytic activity of wild Codonopsis lancealata was increased by heating for 5 min at $100^{\circ}C$ and decreased by addition of NaCl. Antioxidative activities of Codonopsis lanceolata were also compared from the electron donating activity. Fresh Codonopsis lanceolata had about $70\%$ of electron donating activity. Independent of cultivation area, electron donating activity dropped to $19\~74\%$ (wild Codonopsis lanceolata) and $27\~59\%$ (cultivated Codonopsis lanceolata) during 15 days storage. But after 30 days storage, we obtained the unexpected results, which meant that the activities were higher activities than 15 days-stored samples or even though the fresh samples. In general, Codonopsis lanceolata could maintain antioxidative activities most strongly with LDPE film and chilled condition.

• Proceedings of the Korean Society of Dyers and Finishers Conference
• /
• 2011.03a
• /
• pp.108-108
• /
• 2011

PLA 즉 폴리유산섬유는 옥수수를 발효하여 글루코오스(포도당)상태를 만든 후 젖산(유산, Lactic acid)으로 만들고 이것을 탈수, 축합반응시켜 polylactic acid로 만든 것이다. 생분해성이 있으므로 저탄소, 녹색성장의 모토를 대변하는 소재라는 이점이 있다. 구조는 에스테르기의 반복단위를 가지는 소수성 섬유로 벤젠환은 없으나 그 외 구조는 폴리에스테르와 비슷하며, 에스테르기가 존재하므로 분산염료와 수소결합하여 염착된다. 그러나 PLA는 융점이 $170^{\circ}C$, Tg $57^{\circ}C$로 내열성이 낮아서 염색온도, 열처리온도, 다림질에 제약이 있으며, 알칼리에 약한 단점이 있다. 따라서 PLA섬유는 낮은 염착량, 내알칼리성, 염착온도 때문에 염색 및 후가공 단계에 많은 사전 실험을 통한 조건 설정이 필요한 까다로운 섬유이다. 본 연구에서는 (주)휴비스의 PLA원사로 제직한 직물(경사:DTY 75/72SD, 위사:DTY 100/72SD, 조직:DOBBY) 생지에 대하여 열처리 시 장력의 유무, 온도, 시간에 따른 폭의 변화를 측정하여 수축률을 알아보았다. 또한, PLA직물을 온도별로 정련한 후 열처리하여 인열강도 측정을 통해 최적 전처리 조건을 조사하였다. 실험결과, PLA생지를 무장력 상태에서 열처리 시 수축이 심하게 일어나고, 장력이 주어져도 열처리 온도에 따라 수축의 정도에 차이가 나타났다. 열처리 시간은 30, 60, 90, 120초로 주었으나 큰 편차는 없었고, 경사가 위사보다 수축 정도가 더 컸으며, $130^{\circ}C$에서는 전체적으로 수축이 심하였다. 생지의 정련에는 인산에스테르계 정련제와 약알칼리인 탄산나트륨으로 조액하여 60, 70, 80, $90^{\circ}C$에서 10분간 처리한 후, Lab. tenter(Mathis, LTE)를 이용하여 110, 120, $130^{\circ}C$에서 30, 60, 90, 120초간 열처리한 다음, KS K 0535 펜듈럼법에 의거하여 인열강도를 측정하였다. 그 결과, 상기 정련온도에서는 인열강도에 영향을 주지 않았으나, 열처리 온도가 $130^{\circ}C$일 때 현저한 강도의 저하를 나타내었다. 실험조건 하에서 가장 적절한 열처리 조건은 $110^{\circ}C$, 60초로 사료된다. 따라서 PLA의 약한 내열성과 내알칼리성 실험결과, 강도나 수축 등 물성변화가 일어나지 않도록 열처리 온도의 제어에 주의가 필요함을 확인할 수 있었다. 실제 섬유가공 작업현장에서는 일반적으로 열처리기가 $180^{\circ}C$이상의 고온으로 고정된 경우가 많은데, 작업자들에게 PLA소재에 대한 사전주의 및 공정변경에 대한 주지가 요구된다.