• 제목/요약/키워드: worn-out

검색결과 342건 처리시간 0.027초

파랑에 의한 새만금 방조제 해측 피복석 거동특성 연구 (A Study on the Behaviour Characteristics of the Saemanguem Sea Dyke Coastal Covering Stones by Sea Waves)

  • 백승철;이소열
    • 한국지반환경공학회 논문집
    • /
    • 제12권7호
    • /
    • pp.67-76
    • /
    • 2011
  • 본 연구에서는 방조제의 피복석에 파랑이 작용하는 경우에 대한 거동특성을 평가하고자 하였다. 파랑은 방조제 또는 호안구조물에 충격하중으로 작용하게 되며, 충격하중이 작용하는 동안 호안구조물은 침식과 부분 붕괴로 인한 급경사지가 발생하게 된다. 또한, 충격하중은 피복석에 마모를 발생시킨다. 방조제는 국내에서 1970년대 이래로 해안가 산업기반시설의 보호를 위해 널리 이용되고 있다. 방조제는 주로 준설모래와 사석 그리고 피복석으로 구성되며, 피해 유형은 1970년대부터 보고되었으나 파랑작용과 피복석의 상호작용에 대한 연구는 아직까지도 충분하지 않은 실정이다. 방조제 피복석의 가장 큰 피해유형은 마모이지만, 이에 대한 연구 역시 충분하지 못한 실정이다. 따라서 본 연구에서는 호안구조물에 파랑이 작용하는 경우 발생하는 충격하중과 피복석의 상호관계를 분석하였다. 방조제에 작용하는 파랑하중을 고려하여 수치해석을 수행하였으며, 파랑하중의 규모와 주기에 따른 피복석의 거동특성을 분석하였다. 또한, 파랑하중으로 인해 발생하는 방조제의 변위증가를 평가하였다.

치아 상실과 심한 마모를 보이는 골다공증 환자에서의 완전구강 회복 증례 (Full mouth rehabilitation in osteoporosis patient with loss of teeth and excessive wear)

  • 김현탁;김명주;임영준;권호범
    • 대한치과보철학회지
    • /
    • 제60권1호
    • /
    • pp.63-70
    • /
    • 2022
  • 구치부 치아 상실을 동반한 치아 마모는 불규칙한 교합평면, 과도한 전치부 마모와 같은 특징적인 양상을 보인다. 적절한 구치부 지지를 부여하고 조화로운 전방유도와 교합평면을 설정하는 치료 방법이 추천된다. 본 증례 보고의 환자는 치아의 병적인 마모가 관찰되고 하악 구치부 치아가 상실되었다. 또한, 골다공증 병력과 Ibandronate 주사 치료와 관련된 골괴사증의 위험성을 인지하고 수술적 치료를 거부하였다. 본 증례에서는 마모된 잔존치를 수복 공간 확보를 위해 수직 고경 거상을 동반한 완전구강회복술로 수복하고, 하악 무치악부는 양측성 후방연장 국소의치로 수복하였다. 면밀한 진단을 통해 수복 계획을 수립하고, 이를 바탕으로 지대치 형성 후 임시 보철물 상태로 적응 기간을 거쳐 최종 보철물 제작하였다. 심미적, 기능적으로 만족할 만한 결과를 얻을 수 있었고, 구강 위생관리 및 교합 안정성을 확인하기 위해 정기적으로 내원하도록 하였다.

미세플라스틱 배출원에 대한 초등예비교사들의 인식 조사 (The Investigation of Pre-Service Elementary Teachers' Awareness on the Sources of Microplastics)

  • 전경문
    • 과학교육연구지
    • /
    • 제46권3호
    • /
    • pp.223-236
    • /
    • 2022
  • 이 연구의 목적은 초등학교 예비교사들을 대상으로 미세플라스틱 배출원에 대한 인식을 조사하는 것이다. 연구 참여자는 학부 남학생 75명과 여학생 91명이었다. 미세플라스틱 배출원에 관한 선행연구들을 참조하여 15문항으로 구성된 설문지를 개발한 후, 전문가 검토 및 예비연구를 통해 수정하였다. 설문 결과, 응답자의 80% 이상이 이전에 뉴스, 인터넷, TV 등을 통해 미세플라스틱에 대해 들어본 경험이 있다고 하였다. 그러나 실험복, 물티슈, 황사용마스크, 종이컵 등이 미세플라스틱 원인물질로 제조된 것을 인지하지 못하는 경향이 있었다. 미세플라스틱 오염이 예상되는 상황을 묻는 설문에서도 '달리는 자동차의 타이어가 마모된다'와 '바닥에 붙어있는 껌이 작아진다'에 대한 선택 빈도가 상대적으로 낮았다. 이러한 결과는 상당수 예비교사들이 합성섬유나 합성고무가 미세플라스틱의 배출원임을 인지하지 못한다는 것을 보여준다. 미세플라스틱 문제에 대한 태도에서는 성별 차이가 나타났다. 즉, 여 예비교사들은 관련 문제에 더 관심을 보이고, 해결에 대한 참여 의지를 더 보이며, 미세플라스틱 관련 교육의 필요성을 더욱 절감하였다. 향후 과학교육을 위한 함의를 논의하였다.

악교정수술 병력을 가진 과도한 치아 마모를 보이는 환자의 수직고경 증가를 동반한 전악 수복 증례 (Full-mouth rehabilitation with increasing vertical dimension on the patient with severely worn-out dentition and orthognathic surgery history: A case report)

  • 탁상명;정창모;허중보;이소현;윤미정
    • 대한치과보철학회지
    • /
    • 제61권1호
    • /
    • pp.33-43
    • /
    • 2023
  • 전체 치열에 걸쳐 나타나는 병적 마모는 교합 평면의 붕괴, 수직고경의 감소, 전치부 조기 접촉, 부적절한 전방유도 및 치아 이동의 문제를 야기하여, 측두하악관절 장애 및 저작 효율의 감소, 치아 과민반응 등의 증상을 유발한다. 과도한 치아 마모(wear)를 보이는 환자의 치료를 위해서는 원인에 대한 분석과 함께 수직고경 변화에 대한 평가가 선행되어야 한다. 본 증례의 환자는 45세 여성으로 악교정수술 병력이 있었으며, 임상 검사, 방사선 검사, 모형 분석을 통해 전반적인 치아의 마모, 상악 전치부의 치간 이개, 하악 과두의 후방위, 보철 수복을 위한 악간 공간 부족을 확인하였다. 수직고경 거상을 동반한 전악구강회복술을 계획하였으며, 가철성 교합 안정장치 및 임시보철물로 새로운 수직고경에 대한 환자의 적응을 평가하였고, 적응된 수직고경을 유지하기 위해 임시 수복물을 기준으로 교차 마운팅을 시행해 최종 지르코니아 보철물을 제작하였다. 교합 관계의 안정적인 회복을 통해 기능 및 심미적으로 만족할 만한 결과를 보였다.

수면 라이프로그 순응도에 대한 연구 (Study on Compliance in Sleep Life Log: Observational Cohort Study)

  • 서수민;백영화;이시우;장현철
    • 대한예방한의학회지
    • /
    • 제27권1호
    • /
    • pp.89-98
    • /
    • 2023
  • Objectives : This study collected sleep information by wearable device in the Korean medicine Daejeon citizen cohort (KDCC). It was measured based on the sleep record information measured by wearing a Fitbit, and the possibility of clinical use was examined for compliance with objective sleep collection. Based on compliance, the possibility of clinical use was examined. Methods : After surveying personal information and PSQI(Pittsburgh Sleep Quality Index), sleep information was collected by Fitbit for 14 days. Compliance was measured based on sleep record information by Fitbit. Compliance was analyzed by sex, age, BMI(Body Mass Index), and sleep group(deep/poor). Results : The number of participants was 730, and the compliance was 94.3%, and the compliance group was 675(92.5%). The age of the participants varied from 30 to 60 years old, and the average age was 46±6.7 years. There were 218 males and 512 females. Young people have high compliance. Males are more compliance than females. As the BMI score decreased in the 30s, the compliance was higher. The underweight group in all age groups had 100 compliance. The underweight group was all female. The low compliance groups were that 30 years males (obesity level2), 50 years females (overweight group), and 50 years females (obesity level2). There was no significant difference in compliance between deep sleep group and poor sleep group. In deep sleep group, females showed higher compliance. In poor sleep group, males showed higher compliance. The average duration of Fitbit usage among participants was 20.1 days. The compliant group wore the device for an average of 21.3 days, while the non-compliant group wore it for only 5.2 days. Of the compliant group, 86.9% (73.8% of all participants) continued to wear the Fitbit after the recommended 14-day period, and 50.8% wore it for more than 20 days. Conclusions : This study showed the possibility of adaptation for wearing a Fitbit for collecting objective sleep information. It is judged that the compliance is high because it was worn for more than 13.2 days out of the 14 days required. It is considered meaningful because the compliance was measured based on the sleep information by Fitbit, not the questionnaire. As the data on objective sleep time is collected automatically, we believe that the burden on participants after the study period is not significant for a certain period. Compliance may be even higher for cohorts related to illnesses and with doctor's orders, rather than for the general population.

ISO 20816 기반 회전기기 진동분석 자동화 알고리즘 개발 (Development of Algorithm for Vibration Analysis Automation of Rotating Equipments Based on ISO 20816)

  • 이재웅;이우귀연;오정석
    • 한국가스학회지
    • /
    • 제28권2호
    • /
    • pp.93-104
    • /
    • 2024
  • 산업현장에서 사용되는 회전기기의 원활한 작동 및 수명연장을 위해서는 설비진단이 필수적이다. 다양한 설비진단의 방법 중 진동진단은 다른 진단방법과 비교하여 불평형(unbalance), 축정렬 불량(misalignment), 베어링 결함(bearing fault), 기어 손상(worn gears), 소음(noise), 공진(resonance) 등 대부분의 초기 결함을 발견할 수 있다. 따라서, 진동분석은 산업현장에서 가장 범용적으로 사용되는 설비진단 방법이며, 설비의 상태를 기반으로 관리하는 예지보전(PdM) 기술로 유용하게 활용된다. 하지만, 진동진단 방법은 기준을 근거로 경험에 의존하여 수행되기 때문에 전문가에 의하여 진행된다. 따라서, 기존에 경험에 의존하여 수행하는 진동진단 방법을 지식화된 코드체계로 구축하여 누구나 쉽게 결함을 판단할 수 있는 시스템을 구축하여 설비의 신뢰성 구축에 기여하고자 한다. 진동측정에 대한 ISO-20816 기준을 근거로 알고리즘을 개발하였고, 석유화학공장 압축기, 수소충전소, 산업용 기계 등 다양한 실증현장에서 진동을 측정한 결과와 개발 시스템을 활용하여 분석한 결과를 비교하여 신뢰성을 검증하였다. 개발된 알고리즘을 통하여 산업현장에서 누구나 회전기기의 상태를 진단하고 결함을 조기에 파악하여 정확한 교체시점에 부품을 교체할 수 있는 예측유지보수(PdM)기술에 기여할 수 있다. 나아가, 정유산업시설, 운송, 생산 시설, 항공시설 등 다양한 산업현장에 적용 시 회전기기의 고장으로 인한 유지보수 비용과 다운타임(down time)의 절감에 이바지할수 있를 것으로 기대된다.

아프가니스탄 틸랴 테페의 사르마티아(Sarmathia)식 검집 패용 방식의 전개 과정으로 본 동서교섭 (Thinking in Terms of East-West Contacts through Spreading Process of Sarmathia-Pattened Scabbard on Tillya-Tepe Site in Afghanistan)

  • 이송란
    • 헤리티지:역사와 과학
    • /
    • 제45권4호
    • /
    • pp.54-73
    • /
    • 2012
  • 최근 북방유목민족인 사르마티아에 관한 고고학적 자료들이 증가하면서 사르마티아인들의 활동 양상과 그 실체들이 조금씩 규명되고 있다. 이 글에서는 사르마티아인들의 동서 교역의 활동 양상을 사르마티아식 검집의 확산 지역 중심으로 살펴보았다. 사르마티아인들의 검은 스키타이나 페르시아인들이 사용한 아키나케스(Akinakes)의 계보를 잇는 것이지만 손잡이나 패용 방식에서 손쉽게 칼을 뺄 수 있도록 변화되었다. 즉 양 측면에 달린 4개 돌기에 끈으로 연결한 검집을 허벅지에 부착시키는 패용 구조로 변한 것이다. 사르마티아식 검은 기원전 5세기 파지리크시기 알타이 지역에서 처음 등장한 이래 사르마티아인들의 활동 중심지인 남시베리아, 박트리아, 파르티아, 로마로 확산되었다. 이 글에서는 동서 교섭의 요충지인 박트리아지역에 속하는 아프가니스탄 틸랴 테페 4호묘에서 출토된 검집에 관심을 두었다. 사르마티아식 검을 패용한 채 매장되었던 틸랴 테페 4호묘의 묘주는 당시 쿠샨왕조의 지배하에 있었던 박트리아에서 상당한 위치의 인물로 파악된다. 묘주가 2자루의 사르마티아식 검을 패용하고 있었던 것은 박트리아에 사르마티아의 영향이 상당이 수용된 사실을 의미한다. 사르마티아인들이 동서교섭에서 중요한 역할을 담당할 수 있었던 배경에는 중국산 물자를 실크로드에 공급하였던 이들의 역할과도 관련이 있다. 이에 사르마티아인들이 활동한 북방 초원 루트에 중국 한대 동경, 메론형 구슬, 수정구슬 등의 장식구슬, 금환연접구슬 등 중국 특히 비단이 생산되었던 남중국의 공예품들이 출토되는 경위에 관심을 가졌다. 모자이크 구슬은 당시 남중국 그리고 사르마티아와의 관계에 의한 것으로 살펴보았다. 거리적으로 먼 사르마티아와 남중국이 교섭할 수 있었던 중간 매체로는 흉노가 주목된다. 이와 관련하여 흉노의 유적에서 남중국에 가장 많은 분포를 보이는 금환연접구슬이 발견되는 점을 참고하였다. 남인도와 동남아시아에서 유행한 금환연접구슬이나 모자이크구슬이 아프카니스탄의 틸랴 테페 유적에는 없는 반면 같은 초원길로 연결되는 사르마티아 유적이나 흉노의 몽골 유적에서 등장하는 점이 흥미로운 것이다. 이는 남중국과 사르마티아, 흉노와의 연결 루트를 상정하게 한다. 한편 사르마티아인들의 중심연대인 기원전 2세기에서 기원후 2세기 사이 초원루트와 남중국을 잇는 교통로로는 운남에서 미안마를 지나 파키스탄, 아프가니스탄을 지나 인도 동부로 들어가는 서남실크로드로 판단된다. 1세기 동서교섭의 루트에는 북방 초원 루트, 남해 루트, 오아시스 루트 등 다양한 루트가 존재한다. 이들 루트들은 운반, 집산되는 물자의 특성이나 당시 정치적 관계에 의해 다양하게 사용되고 형성되었다. 이 글에서는 인도와 중앙아시아, 그리고 남중국을 잇는 최단거리의 길인 서남루트가 북방 유목민들인 사르마티아인들에 의해 사용되고 개척된 상황을 살펴본 것이다.

경찰서 유치장 시설 및 운영에 관한 유치인의 인식연구 (A Study of Detainees' Perceptions of the Detention Facilities of the Police Station and their Operation)

  • 정우열;박동균;김도균
    • 시큐리티연구
    • /
    • 제13호
    • /
    • pp.423-449
    • /
    • 2007
  • 본 연구는 경찰서 유치장에 구금되어 있는 유치인들의 인식분석을 통하여 유치장의 시설 및 운영 실태를 분석하고, 그에 대한 정책적 시사점을 제시하는데 목적이 있다. 한국 경찰서 유치장 시설에 대한 유치인 인식조사 결과에 따른 정책적 제언은 첫째, 유치장 구조는 인권친화적인 일자형으로 배치하고, 여성${\cdot}$남성${\cdot}$장애인${\cdot}$소년범등의 피의자를 차별하여 유치할 수 있는 유치장 시설을 확충해야 한다. 둘째, 유치실 외부에 목욕장과 세면장 시설을 유치인들이 항상 이용할 수 있도록 하여야 한다. 셋째, 비상구가 설치되어 있지 않은 경우 빠른 시일 내에 비상구를 설비해야 하며, 수용된 유치인수와 내부면적을 고려하여 소화기를 충분히 비치해야 할 것이다. 넷째, 외부의 공기를 유치장 내부로 순환할 수 있도록 적절한 수의 창문을 확보하여야 할 것이며, 인공조명에만 의존하기 보다는 자연채광을 활보하는 실질적인 조치가 필요하다. 다섯째, 유치장 내 냉${\cdot}$난방 시설은 유치인의 수와 규모에 합당한 시설을 구비하여야 할 것이다. 또한, 경찰서 유치장 운영에 대한 유치인 인식조사 결과에 따른 정책적 제언은 첫째, 유치장 운영의 문제는 낙후된 유치장 시설과 함께 다루어져야 할 것이며, 빠른 시일 내에 예산확보 등과 같은 조치를 해야 한다. 둘째, 낡고 오랜 된 책들은 폐기하고, 독서 흥미를 유발 할 수 있는 잡지 등을 구비하는 것이 요구되며, 유치된 피의자 중에는 생계가 곤란한 점 등을 충분히 고려하여 기본적인 생필품 등은 지급하는 것이 바람직하다. 셋째, 영치물품의 관리는 모든 경찰서 유치장에서 동일한 제목의 서류와 양식으로 관리 되어져야 하며, 여성유치보호관 인력을 확충하여 여성 유치인들에 대한 신체검사 및 송치 등의 업무를 전담하게 하여야 한다. 또한, 장애인을 위해 구비된 목발이나 휠체어, 이동식 좌변기 등과 같은 장애인관련 시설물들을 잘 관리하고 보관할 필요가 있다.

  • PDF

근로자의 산업보건 지식과 태도에 관한 조사연구 (A Survey on the Knowledge and Attitude of Workers Concerning Occupational Health)

  • 박영식;조수열;남철현
    • 한국환경보건학회지
    • /
    • 제18권2호
    • /
    • pp.3-18
    • /
    • 1992
  • This research was carried out on 1,017 production workers for four months from May to August, 1991, to search more effective management method of their health by grasping their knowledge and attitude on industrial health. The results of this study can be summarized as follows: 1. As for general characteristics, 74.2% were male and 25.8% were female among the 1,017 workers. The two largest age groups were 30~39, 38.7%. As for education level, graduation from high school was 58.6%, 61.2% were married, 35.9% owned their house, and workers who worked more than 1 year less than 5 years was 52.9%, workers who worked 8 hours a day was 46.7%, the largest group income level was 60~69 thousand won 21.2%, and the degree of satisfaction with work was ordinary, 45.6%. 2. The degree of recognition concerning occupational diseases was 92.5% at a very high rate. Causes of occupational diseases under the present work field were in order of noise, dust, heavy metal. The largest group of the counterplan for prevention was an improvement of working environment, 62.0%. 3. The major cause that threatens worker's health was poor working environment, 31.4%. As the best method for workers' health management, working environment management was pointed. 4. As for health examination result, the response that it is of use to health management was 53.8%. As for examination method and result, 42.7% responded that they are formal. The practice period was more than once every six months as the largest group, and the highest desire for improvement was that they wants an exact information of the result. 5. 49.3% of the respondents know about the measurement of working environment an the response that the measurement is necessary to improve working environment was 57.9%, and that the results from the measurement were reflected on improvement an management 57.5%. Appropriate period to take a measurement was more than once per six months, 40.2% and per three months, 29.1%. 6. As for safety and halth instruction, 34.5% were educated for both, 38.2% for only safety education and just 4.6% for only health education. 51.9% responded that they had never been educated out of work place. The period of its practice was more than once a month, 39.5% and every three months, 21.3%. 7. The importance of safety and health showed that the one is equal to the other, 59.8%, that the one is more important, 29.6%, and that other is more important, 7.6%. 67.7% said the necessity of a safety and health manager. 8. In spite of more or less health obstacle of work environment, 14.9% of the respondents wanted to overwork to gain an allowance for over-time work, 39.9% didn't, and 40.2% according to condition and state. 9. As the most important cause of industrial accident, 40.2% indicated unsafe behavior. As for the individual protective instrument, 66.1% of all the respondents said they have worn it to protect industrial diseases. 10. As for the degree of understanding of the contents in Industrial Safety and Health Law and Industrial Law of Accident Insurance, an affirmative response was respectively 49.3% and 50.8% and the sources of safety-health information were televisions and radios, 28.0%. Therefore, it is necessary that we do positive working environmental improvement, continuous management and health education's inforcement to increase their health and prevent occupational diseases.

  • PDF

로우터리 맥류파종기 경운날의 개량시험 (Improvement of Rotary Tine for Barley Seeder Attached to Rotary Tiller)

  • 김성래;김문규;김기대;허윤근
    • Journal of Biosystems Engineering
    • /
    • 제4권1호
    • /
    • pp.1-23
    • /
    • 1979
  • The use of barley seeder attached to rotary tiller in the rural area has a significant meaning not only for the solution of labor peak season, but also for the increase of land utilization efficiency. The facts that presently being used barley seeders are all based on the mechanical principles of the reverse rotation, center drive and are all using forward rotating tine, which is used to be easily and heavily worn out when it rotates reversely, raise problem of recommending them to rural area in Korea. Therefore, the main objective of the study was to develop new type of rotary tine attachable to barley seeders. To attain the objective the following approaches were applied. (1) The kinematic analysis of reverse rotating barley seeders. (2) The studies on the soil bin and artificial soil. (3) The comparative experiment on the power requirement of prototype tine. The results obtained from the studies are summarized as follow: 1. The kinematic analysis of barley seeder attached to rotary tiller: The following results were obtained from the kinematic analysis for deriving general formulae of the motion and velocity characterizing the rotary tine of barley seeders presently being used by farmers. a) The position vector (P) of edge point (P) in the rotary tine of reverse rotating, center drive was obtained by the following formula. $$P=(vt+Rcos wt)i+Rsin wt j+ \{ Rcos \theta r sin \alpha cos (wt- \beta +\theta r) +Rsin \theta r sin \alpha sin (wt-\beta + \theta r) \} lk $$ b) The velocity of edge point $(P^')$ of reverse rotating, center drive rotary tine was obtained by the following formula. $$(P^')=(V-wR sin wt)i+(w\cdot Rcoswt)j + \{ -w\cdot Rcos \theta r\cdot sin \alpha \cdot sin (wt-\beta +\theta r) + w\cdot Rsin \theta r\cdot sin \alpha \cdot cos (wt- \beta + \theta r \} k $$ c) In order to reduce the power requirement of rotary tine, the angle between holder and edge point was desired to be reduced. d) In order to reduce the power requirement, the edge point of rotary tine should be moved from the angle at the begining of cutting to center line of machine, and the additional cutting width should be also reduced. 2. The studies on the soil bin and artificial soil: In order to measure the power requirement of various cutting tines under the same physical condition of soil, the indoor experiments Viere conducted by filling soil bin with artificially made soil similar to the common paddy soil and the results were as follows: a) When the rolling frequencies$(x)$ of the artificial soil were increased, the densIty$(Y)$ was also increased as follows: $$y=1.073200 +0.070780x - 0.002263x^2 (g/cm^3)$$ b) The absolute hardness $(Y)$ of soil had following relationship with the rolling frequencies$(x)$ and were increased as the rolling frequencies were increased. $$Y=37.74 - \frac {0.64 + 0.17x-0. 0054x^2} {(3.36-0.17x + 0.0054x^2)^3} (kg/cm^3)$$ c) The density of soil had significant effect on the cohesion and angle of internal friction of soil. For instance, the soil with density of 1.6 to 1.75 had equivalent density of sandy loam soil with 29.5% of natural soil moisture content. d) The coefficient of kinetiic friction of iron plate on artificial soil was 0.31 to 0.41 and was comparable with that of the natural soil. e) When the pulling speed of soil bin was the 2nd forward speed of power tiller, the rpm of driving shaft of rotary was similar to that of power tiller, soil bin apparatus is indicating the good indoor tester. 3. The comparative experiment on the power requirement of prototype tine of reverse rotating rotary: According to the preliminary test of rotary tine developed with various degrees of angle between holder and edge pcint due to the kinematic analysis, comparative test between prototype rotary tine with $30 ^\circ $ and $10 ^\circ$ of it and presently being used rotary tine was carried out 2nd the results were as follows: a) The total cutting torque was low when the angle between holder and edge point was reduced. b) $\theta r$ (angle between holder and edge point) of rotary tine seemed to be one: of the factors maximizing the increase of torque. c) As the angle between holder and edge point ($\theta r$) of rotary tine was $30 ^\circ $ rather than $45 ^\circ $, the angle of rotation during cutting soil was reduced and the total cutting torque was accordingly reduced about 10%, and the reduction efficiency of total cutting torque was low when the angle between holder and edge point ($\theta r$) of rotary tine was $10 ^\circ $, which indicates that the proper angle between holder and edge point of rotary tine should be larger than $10 ^\circ $ and smaller than $30 ^\circ $ . From above results, it could be concluded that the use of the prototype rotary tine which reduced the angle between holder and edge point to $30 ^\circ $, insted of $45 ^\circ $, is disirable not only decreasing the power requirements, but also increasing the durabie hour of it. Also forward researches are needed, WIlich determine the optimum tilted angle of rotary brocket, and rearrangement of the rotary tine on the rotary boss.

  • PDF