• Title/Summary/Keyword: workplace protection factor

Search Result 12, Processing Time 0.021 seconds

Evaluation of a New Workplace Protection Factor―Measuring Method for Filtering Facepiece Respirator

  • Sun, Chenchen;Thelen, Christoph;Sanz, Iris Sancho;Wittmann, Andreas
    • Safety and Health at Work
    • /
    • v.11 no.1
    • /
    • pp.61-70
    • /
    • 2020
  • Background: This study aims to assess whether the TSI PortaCount (Model 8020) is a measuring instrument comparable with the flame photometer. This would provide an indication for the suitability of the PortaCount for determining the workplace protection factor for particulate filtering facepiece respirators. Methods: The PortaCount (with and without the N95-CompanionTM) was compared with a stationary flame photometer from Moores (Wallisdown) Ltd (Type 1100), which is a measuring instrument used in the procedure for determining the total inward leakage of the particulate filtering facepiece respirator in the European Standard. Penetration levels of sodium chloride aerosol through sample respirators of two brands (A and B) were determined by the two measuring systems under laboratory conditions. For each brand, thirty-six measurements were conducted. The samples were split into groups according to their protection level, conditioning before testing, and aerosol concentration. The relationship between the gauged data from two measuring systems was determined. In addition, the particle size distribution inside the respirator and outside the respirator was documented. Linear regression analysis was used to calculate the association between the PortaCount (with and without the N95-CompanionTM) and the flame photometer. Results: A linear relationship was found between the raw data scaled with the PortaCount (without N95-CompanionTM) and the data detected by the flame photometer (R2 = 0.9704) under all test conditions. The distribution of particle size was found to be the same inside and outside the respirator in almost all cases. Conclusion: Based on the obtained data, the PortaCount may be applicable for the determination of workplace protection factor.

Field Attenuation of Foam Earplugs

  • Copelli, Fran;Behar, Alberto;Le, Tina Ngoc;Russo, Frank A.
    • Safety and Health at Work
    • /
    • v.12 no.2
    • /
    • pp.184-191
    • /
    • 2021
  • Background: Hearing protection devices (HPDs) are often used in the workplace to prevent hearing damage caused by noise. However, a factor that can lead to hearing loss in the workplace is improper HPD fitting, and the previous literature has shown that instructing workers on how to properly insert their HPDs can make a significant difference in the degree of attenuation. Methods: Two studies were completed on a total of 33 Hydro One workers. A FitCheck Solo field attenuation estimation system was used to measure the personal attenuation rating (PAR) before and after providing one-on-one fitting instructions. In addition, external ear canal diameters were measured, and a questionnaire with items related to frequency of use, confidence, and discomfort was administered. Results: Training led to an improvement in HPD attenuation, particularly for participants with poorer PARs before training. The questionnaire results indicated that much HPD discomfort is caused by heat, humidity, and communication difficulties. External ear canal asymmetry did not appear to significantly influence the measured PAR. Conclusion: In accordance with the previous literature, our studies suggest that one-on-one instruction is an effective training method for HPD use. Addressing discomfort issues from heat, humidity, and communication issues could help to improve the use of HPDs in the workplace. Further research into the effects of canal asymmetry on the PAR is needed.

A Development of Preliminary Respirator Selection Guide(PRSG) for Workers Exposed to Chemicals (화학물질 노출 근로자를 위한 호흡보호구 선정 지침 개발)

  • Han, Don-Hee;Yoo, Kye-Mook
    • Journal of Korean Society of Occupational and Environmental Hygiene
    • /
    • v.24 no.3
    • /
    • pp.393-403
    • /
    • 2014
  • Objectives: Korean Occupational Safety and Health Agency(KOSHA) intended to provide guidance to respirator program administrators on respirator selection. The purpose of this project is to suggest a preliminary respirator selection guide(PRSG) for the final guidance certified by KOSHA for the correct selection of respirators in the workplace. Materials: This PRSG was made on the based of current status of respirator usage including respirators available in Korea, foreign documents search and so on. PRSG was partially modified NIOSH pocket guide to chemical hazards, 3M Respirator Protection Resource Guide(RPRG) and OSHA Assigned Protection Factor(APF) rulemaking. Results: Respirators for chemicals having Korean Occupational Exposure Limits(KOELs) can be recommended in PRSG. For the others chemicals that have no KOELs, PRSG tells you what respirators you can select, using a simple step-by-step approach after health hazard assessment like HSE procedure. Conclusions: PRSG helps you to decide the right level of protection for a given hazardous substance and how to select the right respirators. PRSG is thus expected to reduce significant misuses of respirators for the work environment.

A Study on the Selection of the Main Factors of Radiation Risk Index Model for assessing risk in Nondestructive Test workplace (방사선투과검사작업장 위험성 평가를 위한 방사선 위해도 지수 모델 주요인자 선정에 관한 연구)

  • Gwon, Da Yeong;Han, Ji young;Bae, Yu-Jung;Kim, Byeong-soo;Kim, Yongmin
    • Journal of the Korean Society of Radiology
    • /
    • v.12 no.4
    • /
    • pp.459-466
    • /
    • 2018
  • Risk of radiation worker and radiation workplace are being mainly assessed by exposure dose. But, the radiation used in radiation workplace and the work environment are different. Because the nondestructive work environment varies depending on the work subject, the existence and nonexistence of shielding board, and so on. So, we need to consider the various factors in effective radiation protection aspect. We conducted a survey of radiation workers with over two years' experience in NDT workplace and heared the thoughts of experts. As a result, radiation source, exposure dose, current status of workplace management, workers with personel dosimetry problem and status of periodic regulatory inspection were chosen as main factors of radiation risk index model. Also, we primarily set weighting factors in order of importance based on questionnaires. Finally, we determined weighting factor for details of main factors through the professional advice. Therefore, we will be able to develop the radiation risk index model for assessing the risk of nondestructive test workplace based on main factors that are selected through this study.

Comparison of Recognition and Fit Factors according to Education Actual Condition and Employment Type of Small and Medium Enterprises (중소규모 사업장의 교육 환경과 고용형태에 따른 호흡보호구 인식도 및 밀착계수 비교)

  • Eoh, Won Souk;Choi, Youngbo;Shin, Chang Sub
    • Journal of the Korean Society of Safety
    • /
    • v.33 no.6
    • /
    • pp.28-36
    • /
    • 2018
  • There was a difference in recognition of respirators according to the educational performance environment. they were showed higher recognition of respirators of group by internal and external mix trainer, less than 6 months, over 1hour, more than 5 times, variety of education. To identify the relationship between types of job classification(typical and atypical)and the levels of recognition of respirators, a total of 153 workers in a business workplace. mainly, typical workers showed higher recognition of respirators than atypical workers. Training of correct wearing showed high demands both typical and atypical workers. Descriptive statistics(SAS ver 9.2)was performed. the results of recognition of respirators were analyzed the mean and standard deviation by t-test, and anova, fit factor is used geometric means(geometric standard deviation), paired t-test, Wilcoxon analysis(P=0.05). Particulate filtering facepiece respirators (PFFR) is one of the most widely used items of personal protective equipments, and a tight fit of the respirators on the wearers is critical for the protection effectiveness. In order to effectively protect the workers through the respirators, it is important to find and evaluate the ways that can be readily applicable at the workplace to improve the fit of the respirators. This study was designed to evaluate effects of mask style (cup or foldable type) and donning training on fit factors (FF) of the respirators, since these are available at various workplace, especially at small business workplace. A total of 40 study subjects, comprised of employment type workers in metalworking industries, were enrolled in this study. The FF were quantitatively measured before and after training related to the proper donning and use of cup or foldable-type respirators. The pass/fail criterion of FF was set at 100. After the donning training for the cup-type mask, fit test were increased by 769%. but foldable-type mask was also increased after the donning training, the GM of FF for the foldable-type mask and it's increase rate were smaller as compared to the cup-type mask. Furthermore, the differences of the increase rates of the GM of FF in employment type of the subjects were not significantly for the foldable-type mask. These results imply that the raining on the donning and use of PFFR can enhance the protection effectiveness of cup or foldable-type mask, and that the training effects for the foldable-type mask is less significant than that for the cup-type mask. Therefore, it is recommended that the donning training and fit tests should be conducted before the use of the PFFR, and listening to workers opinion regularly.

CHARACTERISTICS OF THE KAERI NEUTRON REFERENCE FIELDS FOR THE CALIBRATION OF NEUTRON MONITORING INSTRUMENTS

  • Kim, Bong-Hwan;Kim, Jang-Lyul;Chang, Si-Young;Cho, Gyu-Seong
    • Journal of Radiation Protection and Research
    • /
    • v.26 no.3
    • /
    • pp.243-248
    • /
    • 2001
  • Neutron reference fields of Korea Atomic Energy Research Institute (KAERI) for calibrating neutron measuring devices to be used in radiation workplace monitoring consist of two kinds of neutron spectra, the direct and the scattered neutron fields, which are produced by using radionuclide neutron sources, 252Cf and 241AmBe sources. Necessary parameters for calibration such as the anisotropy factor of each neutron source and the room-scattered fraction of some neutron surveymeters in the KAERI calibration facility were determined by calculation or measurement. Spectral measurement of scattered neutron fields were performed at each reference calibration point using a Bonner Multi-sphere Spectrometer (BMS) and the dosimetric quantities for calibration also estimated from the neutron energy spectra which were unfolded using the BUNKI code.

  • PDF

A Study on the Effects of Risk Factors and Protection Factors of Care givers on Job Change Intention: Focused on the Mediation Effect of Occupational Adaptation (요양보호사의 위험요인과 보호요인이 이직의도에 미치는 영향 연구: 직업적응의 매개효과 중심으로)

  • Park, Su Jan;Kim, Youn Jae
    • Asia-Pacific Journal of Business Venturing and Entrepreneurship
    • /
    • v.13 no.2
    • /
    • pp.159-175
    • /
    • 2018
  • The purpose of this study was to identify the factors that could overcome the crisis and adversity of the nursing care provider through understanding the effect of job adaptation on the turnover intention of the nursing care provider and to contribute to the various problems of the nursing care provider in the long term. In order to confirm this as an empirical research task, risk factors and protection factors, general characteristics of the survey subjects, job adaptation and turnover intention were selected, and the risk factors and protective factors of caregivers' As a mediator. So Seoul. The results of the questionnaire survey were as follows: 291 caregivers in the elderly medical welfare facilities in Gyeonggi area. First, as the relationship between the risk factors and protective factors of occupational caregivers and occupational adaptation were more severe, the higher the maladjustment of the workplace culture, the more the job satisfaction and organizational commitment were adversely affected. The emotional support, The higher the information support, the more satisfied and satisfied the job. Second, the relationship between the risk factors of the caregiver and the protective factors and the turnover intention, the higher the conflict of caregivers, the more unstable the workplace, the more difficult it is to adapt to work culture, Respectively. Finally, as a result of verifying the mediating effect of occupational adaptation on the relationship between risk factors and protective factors and turnover intention of caregivers, job satisfaction, which is a sub-factor of job adaptation, It is shown that they play mediating roles only in the relationship between stress and turnover intention, and do not play a mediating role in the relationship between protective factor self - efficacy and social support and turnover intention. In other words, if caregivers feel satisfaction about their job, they can be less stressed on their jobs, improve their self-efficacy, and have a positive attitude toward social support. Also, it was found that the more the caregiver 's immersion into the organization, the less job stress and turnover intention decreased, but the self - efficacy and social support perception were not influenced. Based on this, the director of the facility should strive to stabilize the operation of the facility and provide high-quality services by seeking ways to improve conflict resolution and adaptation to the workplace culture so that nursing care workers can adapt to their work. And it is required to develop active management strategies and institutional support for improving job satisfaction and organizational commitment of caregivers.

Change of Stages and Related Factors for Wearing of Hearing Protection Device among Noisy Workplace-workers (소음작업장 근로자의 청력보호구 사용단계와 관련요인)

  • Kim, Young-Mi;Jeong, Ihn-Sook
    • Journal of Korean Academy of Nursing
    • /
    • v.40 no.5
    • /
    • pp.736-746
    • /
    • 2010
  • Purpose: This study was done to identify the distribution and related factors for stage of change for wearing hearing protection devices (HPDs) by workers in environments with high noise. Predictors of Use of Hearing Protection Model and Trans-theoretical Model were tested. Methods: The participants were 755 workers from 20 noisy work places in Busan and Gyeongnam. Data were collected from January to April 2008 using self-administered questionnaires, and analyzed using multiple logistic regression. Results: There were significant differences in social mode (OR=1.35, 95% CI: 1.06-1.73) between precontemplation/contemplation and preparation stage, in males (OR=2.36, 95% CI: 1.24-4.51), workers with high school education or less (OR=1.39, 95% CI: 1.28-2.78), shift workers (OR=1.50, 95% CI: 1.02-2.21), workers who previously worked in noisy places (OR=1.39, 95% CI: 1.20-2.34), and workers who had previous hearing examinations (OR=1.89, 95% CI: 1.25-2.85), in the social model (OR=1.59, 95% CI: 1.42-1.78), and self-efficacy (OR=1.05, 95% CI: 1.02-1.08) between workers in preparation and action stages, in length of time working in noisy work places (OR=2.26, 95% CI: 1.17-4.39), social model (OR=1.66, 95% CI: 1.33-2.08), and perceived benefit (OR=0.95, 95% CI: 0.93-0.97) between action and maintenance stage. Conclusion: Social model was a common factor showing differences between two adjacent stages for wearing HPDs. The results provide data for developing programs to encourage workers to wear HPDs and application of these programs in work settings.

The Association between Psychosocial Work Environment and Depressive Symptoms among Korean Teachers (한국 교사의 심리·사회적 근로환경과 우울 위험의 관련성)

  • Choi, Eunsuk;Kwon, Minjung;Lee, Hae-Joon;Cho, Gyo-Young
    • Research in Community and Public Health Nursing
    • /
    • v.28 no.4
    • /
    • pp.463-471
    • /
    • 2017
  • Purpose: This study aimed to identify the association between psychosocial work environment and depressive symptoms among Korean teachers. Methods: Data on 235 elementary school teachers and 341 middle and high school teachers was obtained from the 2014 Korean Working Condition Survey. The effect of psychosocial work environment on depressive symptoms was determined by multiple logistic regression analyses. Results: The prevalence of depressive symptoms was 18 % in elementary school teachers and 24 % in middle and high school teachers. When adjusted for demographics and other socio-psychological and environmental factors, 'social community at work' served as a protection factor for Korean teachers' depressive symptoms. In addition, 'cognitive demands' in elementary school teachers and 'social support from supervisors' in middle and high school teachers were found to be predictors of depressive symptoms. Conclusion: Interventions to increase 'social community at work' and 'social support from supervisors', and to decrease 'cognitive demands' may be helpful for Korean teachers at risk of depression.

Neutron Dose Measurements Using TLDs in a 252Cf Neutron Field (252Cf 중성자장에서 열형광선량계(TLD)를 이용한 중성자 방사선량 측정)

  • Chang, Insu;Kim, Sang In;Lee, Jung Il;Kim, Jang Lyurl;Kim, Bong Hwan
    • Journal of Radiation Protection and Research
    • /
    • v.38 no.1
    • /
    • pp.37-43
    • /
    • 2013
  • In case of neutron dose measurement using TLDs (thermo-luminescence dosimeters), because the neutron energy dependence of the TLD is very high, the calibration of the energy response according to the characteristics of the neutron spectrum of workplace is required. In the present study, the ambient dose equivalent rates inside and around the Long-Counter (neutron detector) with narrow and complex inside in the neutron field of $^{252}Cf$ were evaluated. The calibration factors to account for the neutron energy dependence of TLDs were established for both the bare and $D_2O$ modulated $^{252}Cf$ neutron beams, respectively. The values of the TLD's measurement were compared with the computational results of the MCNPX (Monte Carlo N-Particles transport code). When using the two calibration factors of the TLD than a single calibration factor, the measured and the calculated values at the point of verification outside and inside the Long-Counter were in more good agreement. This results show that TLD should be calibrated in the reference neutron field similar to workplace situation.