• Maritime Security
• /
• v.5 no.1
• /
• pp.113-136
• /
• 2022

China has been pushing for a systematic strategy for territorialization over a long period of time to invade Korea's West Sea (Yellow Sea) in order to create China's territorial water. China's strategy for territorializing the West Sea is an activity in which China curbs the use of South Korea and enforces the illegal use of China in order to dominate the West Sea exclusively. China aided Chinese fishing boats that engaged in illegal fishing in Korea's jurisdiction as a means to territorialize the West Sea, and is opposed to combined exercise and training of Korea and the United States Naval Forces in the West Sea, while intentionally entering KADIZ(Korea Air Defense Identification Zone). In addition, Beijing used 'scientific exploration and research' measures as a pretext for its strategies in order to encroach on Korea's West Sea. China is carrying out such work to announce to the world that China is a systematic and organized country while consistently attempting to dominate the West Sea. China's activities in the West Sea seriously infringe South Korea's sovereignty. In order to respond to China's strategies of territorialization in the West Sea stated above, I analyzed the rejection effect of the ROK-US combined military training in the West Sea and presented a 'proportional response strategy centered on the ROK-US combined forces'. Korea should be able to respond proportionally to China's activities in the seas around the Korean peninsula, and Korea should be able to neutralize China's attempt to a Fait Accompli. In addition, just as China installs buoys in the Korea-China Provisional Measures Zone, Korea should be able to install and actively utilize some devices in the West Sea and for the use of free and open West Sea. Korea should not just wait for the tragic future to come without preparing for China's gradual and long-term strategy, and Seoul needs to respond to China's maritime policy in the West Sea with a more active attitude than it is now. China has historically taken a bold and aggressive response to neighboring countries that are consistent with a passive attitude, on the other hand, Beijing has taken a cautious approach to neighboring countries that respond with an active attitude. It should not be forgotten that Korea's passive response to the Chinese strategy in the name of a 'realistic approach' such as Korea's economic dependence on China for economy will result in China's success for territorialization of the West Sea.

• Journal of the Korean Wood Science and Technology
• /
• v.14 no.1
• /
• pp.3-44
• /
• 1986

In order to obtain the basic physical and mechanical properties of steel wire reinforced particleboard, particleboards were formed with large particles through 2.11 mm (12 meshes) and retained on 1.27mm (20 meshes) sieves and small particles through 1.27mm (20 meshes) and retained on 0.42mm (60 meshes) sieves from the plywood mill wastes of meranti (Shorea spp.) in the form of pallmanchips, applying urea-formaldehyde resin as an adhesive on the particle surface in 10 percent on the oven dried weight of particles, and arranging steel wires of 1mm in diameter 5,10,15,20, and 25mm in longitudinal and transverse direction with crossing in the mid of the board depth in single layer boards, 10mm in longitudinal or transverse direction without crossing in two layers and 10mm in longitudinal and transverse directions with and without crossing in three steel wire layers boards. The stepwise 9-minutes-multi-pressing schedule in 5 minutes at 35 kgf/$cm^2$, 2.5 minutes at 25 kgf/$cm^2$. and 1.5 minutes at 15 kgf/$cm^2$ was applied for $300{\times}200{\times}13$mm board at the temperature of 160$^{\circ}C$ in a hot press. Specific gravity, thickness swelling, bending properties of modulus of rupture (MOR), modulus of elasticity(MOE), work to proportional limit, and work to ultimate load, internal bond (IB), and screw holding power(SHP) of the reinforced boards were analyzed on the wire openings and wire layers. The results obtained are summarized as follows; 1) In specific gravity, particleboards with large particles and small particles had higher value with more steel wire placements and more steel layers composition, 2) Particleboards with large particles in accordance with more steel wire liners composition gave very poor thickness swelling. 3) The mechanical properties of particleboards formed with large or small particles were reinforced with more steel wire layers. Therefore, bending strength was improved in modulus of rupture, modulus of elasticity, and work to ultimate load. Especiallv, particleboards with two or three steel wire layers showed the tension lamination effect when the steels in lower steel wire layer were oriented parallel to the board length. 4) The modulus of rupture, modulus of elasticity, and work to ultimate load in bending varied with opening area, distance of lengthwise wires multipled by distance of transverse wires. Particleboards formed with large particles resulted in higher value in modulus of rupture with 1.5-3 $cm^2$ opening area, 1-2cm distance between transverse wires, and 1.5-2.5cm distance between lengthwise wires. Particle boards formed with small particles showed higher value with 0.5-1.5$cm^2$ or 3.75-6.25 $cm^2$ opening area, 0.5 or 2.5cm distance between transverse wires. 5) In modulus of elasticity, particleboards formed with large particles with one steel wire layer suggested higher value with 5-3$cm^2$ opening area, 1-2.5cm distance between transverse wires and also 1-2.5 cm distance between lengthwise wires. Particleboards formed with small particles showed higher value with 0.75-1.25$cm^2$ or 3-6.25$cm^2$ opening area and 0.5 or 2.5cm distance between transverse wires. 6) Particleboards formed with large particles gaved higher value in work to ultimate load with 1-3$cm^2$ opening area. Particleboards formed with small particles showed increasing tendancy with decreasing opening area. 7) In internal bond and screw holding power, particleboards formed with large particles had increasing value in two and three steel wire layers compositions, but particleboards formed with small particles showed no difference. Particleboards formed with large particles containing one steel wire layer showed no difference in internal bond and screw holding power, and particleboards formed with small panicles containing one steel wire layer resulted in increasing value in internal bond and decreasing value in screw holding power in accordance with increase in opening area.