• Advances in Energy Research
• /
• v.6 no.2
• /
• pp.103-129
• /
• 2019

While global demand for energy increases annually, at the same time the demand for carbon-free, sulphur-free and NO_x-free energy sources grows considerably. This state poses a challenge in the research for newer sources like biomass and shale gas as well as renewable energy resources such as solar, wind, geothermal and hydraulic energy. Although wave energy also is a form of renewable energy it has not fully been exploited technically and economically so far. This study tries to explain those reasons in which it is beyond doubt that the demand for wave energy will soon increase as fossil energy resources are depleted and environmental concerns gain more importance. The electrical energy supplied to the grid shall be produced from wave energy whose conversion devices can basically work according to three different systems. i. Systems that exploit the motions or shape deformations of their mechanisms involved, being driven by the energy of passing waves. ii. Systems that exploit the weight of the seawater stored in a reservoir or the changes of water pressure by the oscillations of wave height, iii. Systems that convert the wave motions into air flow. One of the aims of this study is to present the classification deficits of the wave energy converters (WECs) of the "wave developers" prepared by the European Marine Energy Center, which were to be reclassified. Furthermore, a new classification of all WECs listed by the European Marine Energy Center was arranged independently. The other aim of the study is to assess the technological state of the art of these WECs designed and/or produced, to obtain an overview on them.

• Journal of Electrical Engineering and Technology
• /
• v.13 no.1
• /
• pp.438-444
• /
• 2018

Structured light vision system has been widely used in 3D surface profiling. Usually, it is composed of a camera and a laser which projects a line on the target. Calibration is necessary to acquire 3D information using structured light stripe vision system. Conventional calibration algorithms have found the pose of the camera and the equation of the stripe plane of the laser under the same coordinate system of the camera. Therefore, the 3D reconstruction is only possible under the camera frame. In most cases, this is sufficient to fulfill given tasks. However, they require multiple images which are acquired under different poses for calibration. In this paper, we propose a calibration algorithm that could work by using just one shot. Also, proposed algorithm could give 3D reconstruction under both the camera and laser frame. This would be done by using newly designed calibration structure which has multiple vertical planes on the ground plane. The ability to have 3D reconstruction under both the camera and laser frame would give more flexibility for its applications. Also, proposed algorithm gives an improvement in the accuracy of 3D reconstruction.

• Proceedings of the Membrane Society of Korea Conference
• /
• 1998.10a
• /
• pp.63-65
• /
• 1998

1. Introduction : Atmospheric discharge of VOC-contaminated streams in chemical plants and air streams from chemical processes poses a serious environmental problem and entails large financial losses. Such emissions may be reduced by i) adsorption process, ii) absorption process and iii) incineration process. These processes only forbids the air pollutions. Throughout the recent decade, another technique-membrane process has emerged. The separation and recovery of organic vapors by membrane process may have great economic potential. Most of the published research works on the separation of organic vapors from air were performed using silicon rubber membranes. However, it is very difficult to fabricate very thin membranes with less than 1 $u m thickness. Plasma polymerization could be a good technique to generate a thin polymer film. The objective of this work is to find out the optimum condition of plasma polymerization for producing VOC separation membrane. For the objective, composite membranes are prepared through plasma polymerization of hexamethyldisiloxane onto porous substrates under different conditions. The membrane is then subjected to the permeation of permanent gases and VOCs to find the correlations between the physical properties of the penetrant and permeability and selectivity.

• Geomechanics and Engineering
• /
• v.9 no.6
• /
• pp.793-813
• /
• 2015

Characterization of discontinuous media is an endeavor that poses great challenge to engineers in practice. Since the inherent defects in cracked domains can substantially influence material resistance and govern its behavior, a lot of work is dedicated to efficiently model such effects. In order to overcome difficulties of material instability problems, one needs to comprehensively represent the geometry of cracks along with their impact on the mechanical properties of the intact material. In the present study, stress-strain results from laboratory experiments on Inada granite was used to derive crack tensor as a tool for the evaluation of fractured domain stability. It was found that the formulations proposed earlier could satisfactorily be employed to attain crack tensor via the invariants of which judgment on cracks population and induced anisotropy is possible. The earlier criteria based on crack tensor analyses were reviewed and compared to the results of the current study. It is concluded that the geometrical parameters calculated using mechanical properties could confidently be used to judge the anisotropy as well as strength of the cracked domain.

• The Journal of Korean Academy of Orthopedic Manual Physical Therapy
• /
• v.27 no.2
• /
• pp.37-43
• /
• 2021

Background: The purpose of this study is to compare and analysis the changes in strength and endurance of the knee extensor muscles after Anterior cruciate ligament reconstruction. Methods: Twelve male subjects with ligament injury were seated on Biodex and the hip joint was flexed at 110°, and torso, lower extremities, and legs were fixed using Velcro. The resistance device was placed at a point 3cm above the ankle, and measurements were taken before and a surgery at 60°/sec and 180°/sec when the knee was maximally extended. The postures ingeniously combine forward-bending poses countered with backward-bending ones. Results: There was no significant difference in the comparison of muscle strength of 60°/sec and 180°/sec before surgery. But there was a significant difference after surgery. There was significant difference in muscle endurance both before and after surgery. There was a significant difference in the pre- and post- operative comparison values of muscle strength and endurance in isokinetic movements at 60°/sec and 180°/sec during knee extension on the injured side. Conclusion: For cruciate ligament tears, Orthopedic reconstruction is recommended. Correct alignment of the knee ligament after surgery can enhance the strength and endurance of the quadriceps femoris during knee extension rejuvenated.

• The Journal of Asian Finance, Economics and Business
• /
• v.8 no.5
• /
• pp.851-861
• /
• 2021

This study aims to explore the specific risks in family small-medium enterprises (SMEs) and explain how they manage these risks to sustain and expand. In Indonesia, family business composes around 95 percent of all businesses and contributes about 80 percent to the country's economy. SMEs contribute approximately 57.8 percent to the nation's gross domestic product. Risk management poses challenges to the family business's survival, as family members do not take actions on risk. The assessment of risk is difficult and family businesses lack the ability to determine risk management priorities, including risk management review processes to evaluate risk, thus leading to family business failures. Applying the case study approach, in-depth semi-structured interviews were conducted in seven family SMEs comprising fifteen informants. Additionally, a focus group discussion consisting of three experts is conducted to reaffirm the findings from the interviews, observations, and field notes. The research identified the specific risks and how the family owners strategize to safeguard against these risks such as cash flow deficiency, operations dysfunction, cultural frailty, disharmony, transgenerational entrepreneurship failure, political uncertainty, and unprofessionalism. Comprehending these risks and their strategic decisions elucidated in this research could enable the family owners and key non-family professionals to work hand-in-hand to thrive over the family business risks together. Further avenues of research regarding family business risk management are also suggested in this study.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• v.15 no.7
• /
• pp.2321-2338
• /
• 2021

Compared with vehicle trajectories, pedestrian trajectories have stronger degrees of freedom and complexity, which poses a higher challenge to trajectory prediction tasks. This paper designs a mode to divide the trajectory of pedestrians at a traffic intersection, which converts the trajectory regression problem into a trajectory classification problem. This paper builds a deep model for pedestrian trajectory prediction at intersections for the task of pedestrian short-term trajectory prediction. The model calculates the spatial correlation and temporal dependence of the trajectory. More importantly, it captures the interactive features among pedestrians through the Attention mechanism. In order to improve the training speed, the model is composed of pure convolutional networks. This design overcomes the single-step calculation mode of the traditional recurrent neural network. The experiment uses Vulnerable Road Users trajectory dataset for related modeling and evaluation work. Compared with the existing models of pedestrian trajectory prediction, the model proposed in this paper has advantages in terms of evaluation indicators, training speed and the number of model parameters.

• Journal of the Korea Institute of Information Security & Cryptology
• /
• v.1 no.1
• /
• pp.38-46
• /
• 1991

This paper pro poses a ley distribution system based on identification information. The system uses an indivdual user's identification instead of the public file used in the Diffie-Hellman sustem. It does not require any services of a center to distribute work keys and users to keep directory public file. We propose an identity-based key distribution system for generating a commom secret conference kdy for two or more users. We assume users are connected in a ring network. Message among users authenticated using each user's identification informa-tion. The security of the our proposed system is based on the difficulty of both factoring large numbers and computing discrete logarithms over large finite fields.

• Journal of the Korean Association of Oral and Maxillofacial Surgeons
• /
• v.48 no.2
• /
• pp.117-121
• /
• 2022

Infantile osteomyelitis is a rare disease that is infective in nature and may rapidly turn fatal, as the disease is often misdiagnosed due to its varied presenting signs. Early diagnosis may help in avoiding systemic involvement and permanent deformity. The disease presents with signs of orbital involvement, nasal congestion, and emesis, as well as other standard hallmarks of infection. Furthermore, the maxilla is a highly vascular and porous bone and the occurrence of osteomyelitis in an infant maxilla is highly uncommon. In addition, routine blood work is not suggestive of the presence of this disease. Thus, prompt diagnosis of this condition poses a challenge to surgeons due to the confusing array of symptoms combined with the rarity of the disease. One such case of osteomyelitis of the maxilla in a young child is presented. The dilemma encountered by the surgeon during the diagnosis and treatment of the disease is discussed.

• Safety and Health at Work
• /
• v.13 no.1
• /
• pp.73-77
• /
• 2022

Background: Whole-body vibration (WBV) exposure of coal mine dumper operators poses numerous health hazards. The case-control study was aimed at assessing the relative musculoskeletal health risk of dumper operators' exposure to WBV with reference to the nonexposed group. Methods: Measurements of WBV exposure were taken at the operator-seat interface using a human vibration analyzer for 110 dumper operators in three coal mines. This vibration measurement was supplemented by a questionnaire survey of 110 dumper operators exposed to WBV and an equal number of workers not exposed to WBV. The relative risk of musculoskeletal disorders (MSDs) has been assessed through the case-control study design. Results: ISO guidelines were used to compare the health risk. It was observed that the prevalence of pain in the lower back was 2.52 times more in the case group compared to the control group. The case group of Mine-2 was 2.0 times more prone to vibration hazards as compared to Mine-3. Conclusion: The case group is more vulnerable to MSDs than the control group. The on-site measurement as well as the response of the dumper operators during the questionnaire survey corroborates this finding.