• Korean Journal of Occupational Health Nursing
• /
• v.12 no.1
• /
• pp.31-38
• /
• 2003

This study is an attempt to analyze the physical load by the type of the nursing tasks at the neurosurgical ICU nurses through the quantitative analysis of the working postures by the type of the nursing tasks with the OWAS(Ovako Working Postures Analysis System). Data collection was conducted through the video recording of the 13 nurses working at the neurosurgical ICU. For the analysis of the work postures by the type of the nursing tasks, and were interviewed regarding the subjective degree of the difficulties with the work postures related to the tasks. Collected data was analyzed through the WinOWAS program. The results were as follows : AC3 or AC4 tasks among the 18 nursing tasks types are "occupied bed making and change of the patient gown", "back massage", "suction", "elimination management", "change of position", "adjustment of bed", "helping the patient to move","measurement of CVP"and "measurement of urine volume". It appears that these tasks are harmful to the musculoskeletal system and the improvement or change of the work is required. The results stated above indicate that improper working postures during the nursing tasks influence the musculoskeletal system. Therefore, making use of assistant devices for the improvement of the working environment at the nursing tasks, based on human technological diagnoses, is required regarding the duty types with massive work pressure known to be harmful to the musculoskeletal system among those performed by the nurses. And there is a need of the education about the employment and maintenance of the vocational back pain prevention.

• Progress in Superconductivity and Cryogenics
• /
• v.13 no.4
• /
• pp.14-17
• /
• 2011

The evaluation of the electromechanical properties of HTS CC tapes is one of the foremost procedures to be done to ensure the applicability of superconducting wires to electric devices. A precise measurement of the stress and strain is important in deriving the mechanical properties under operating environment. Up to now, there is no standard test method yet for the electromechanical property evaluation of HTS tapes under self field and external magnetic field although there are already reports on the different devices used to evaluate these properties. Strain can be measured by adopting a strain gauge or a high resolution double extensometer. In this study, strain effect on $I_c$ in HTS CC tapes under magnetic fields was evaluated. Comparison of advantages and setback of strain measuring devices were discussed. In addition, a dual strain measurement system using both the SG and extensometer may be practical to lessen the burden in case one of the measuring devices does not work well.

• Journal of Digital Convergence
• /
• v.11 no.11
• /
• pp.85-94
• /
• 2013

This paper presents a novel mobile measurement system with multi antennas which enable mobile measurement as well as fixed measurement with telescope mast. Proposed system installed 4 omni directional antennas for the space diversity process and one directional log periodic antenna for the simultaneous conventional fixed measurement. Whole antenna systems are connected to the custom DTV channel analyzers with Ethernet networks respectively and processed by the main controller to calculate real time average receive levels. To prove the performance of proposed system, the typical receive models are categorized as 3 area types - open area, building area and house area, and then intensive field tests were performed through mobile and fixed measurement phases. With these measurement data, the relationships between mobile and fixed measurement are analyzed, and the concept of compensation factor is proposed to assume the average receive level of signal. The field test is fulfilled as a co-work with public broadcasters and the proposed system is applied to the intensive coverage measurement projects for metropolitan areas by the korean government agencies.

• Journal of Korean Library and Information Science Society
• /
• v.43 no.2
• /
• pp.137-155
• /
• 2012

In this study, libraries of national and public universities, libraries of private universities, libraries of colleges, public libraries of local governments were selected to measure, compare and analyze the differences in job satisfaction of librarians working in different types of libraries. As for measurement items, 10 factors for job satisfaction were chosen. In doing so, this researcher compared and analyzed the overall job satisfaction and work satisfaction, employment satisfaction, satisfaction with promotion system, satisfaction with work distribution, satisfaction with payment system, satisfaction with service system, satisfaction with facility environment, satisfaction with educational training, satisfaction with welfare system, and satisfaction with personal relations. The results of the analysis on job satisfaction with each factor by librarians working in different types of libraries are presented as follows. First, the overall job satisfaction value of the librarians was 3.940, which means relatively high satisfaction, and in terms of a type of library, libraries of private universities showed the highest value, and the next ones were found to be libraries of colleges, public libraries and libraries of national and public libraries. Secondly, regarding the ranking of the overall satisfaction with the selected 10 job satisfaction factors by different types of libraries, educational training was found to rank the highest, and the next ones were surveyed to be the job, the service system, the personal relations, the employment system, the work distribution, the facility environment, the payment system, the welfare system, and the promotion system.

• Journal of Korean Society of Occupational and Environmental Hygiene
• /
• v.33 no.2
• /
• pp.215-229
• /
• 2023

Objectives: To validate the effectiveness of a real-time chemical exposure monitoring system developed by KOSHA (Korea Occupational Safety and Health Agency), we applied the system to a workplace in the electronics industry for 153 days. Methods: The monitoring system consisted of a PID chemical sensor, a LTE communication equipment, and a web-based platform. To monitor chemical exposure, four sets of sensors were placed in two manufacturing tasks - inspection and jig cleaning - which used TCE as a degreasing agent. We reviewed previous reports of work environment measurements and conducted a new work environment measurement on one day during the period. The PID sensor systems detected the chemical exposure levels in the workplace every second and transmitted it to the platform. Daily average and maximum chemical exposure levels were also recorded. Results: We compared the results from the real-time monitoring system and the work environment measurement by traditional methods. Generally, the data from the real-time monitoring system showed a higher level because the sensors were closer to the chemical source. We found that 28% of jig cleaning task data exceeded the STEL. Peak exposure levels of sensor data were useful for understanding the characteristics of the task's chemical use. Limitations and implications were reviewed for the adoption of the system for preventing poisoning caused by chemical substances. Conclusions: We found that the real-time chemical exposure monitoring system was an efficient tool for preventing occupational diseases caused by chemical exposure, such as acute poisoning. Further research is needed to improve the reliability and applicability of the system. We also believe that forming a social consensus around the system is essential.

• Journal of Korean Society for Atmospheric Environment
• /
• v.10 no.E
• /
• pp.299-302
• /
• 1994

At a nuclear power plant, environmental radioactivity monitoring is routine work for the radiation safety management For the environmental monitoring of tritium($^3$H) activity in water sampled liquid scintillation counting( LSC) method is applied to measure low- energy beta activity from tritium in the samples. The $^3$H activity is measured using the BECKMAN 5801 system at the KRISS( Korea Research Institute of Standards and Science) for evaluating the lower limits of detection( LLD) of $^3$H measurement and the measuring capability of low-level $^3$H activity at four nuclear Power Plant sites. The LSC systems used for low-level $^3$H activity measurements at the nuclear Power Plants are confirmed to satisfy throughout an intercomparison study under the experimental arrangements by the KRISS.

• Journal of Korean Society of Occupational and Environmental Hygiene
• /
• v.33 no.4
• /
• pp.427-438
• /
• 2023

Objectives: This study aims to create a safer working environment by examining the working environment of cleanroom cleaning workers through a survey and comparing the differences in perception between workers and managers. Methods: The survey was written based on the working environment and the safety and health management system. In order to improve the quality of the study, we visited the sites in person and conducted an in-depth interview. SPSS Statistics 26 (IBM, USA) was used to analyze the data. Results: Based on the survey, differences were found in chemical used, MSDS sharing methods, risk factors during cleaning work, work environment measurement results, special health examination items, places considered dangerous, and work. Conclusions: It is necessary that there be different work environments and risk factors for cleanroom cleaning workers at respective workplaces. As a result of the survey, there was found to be a difference in perception between workers and managers, and both workers and managers should try to reduce this difference.

• Journal of Platform Technology
• /
• v.11 no.2
• /
• pp.66-75
• /
• 2023

Hydrological survey measurement technology has improved due to the introduction of high-tech equipment and advances in technology, but hydrological survey still requires a lot of manpower and time, and the manpower invested is very limited compared to the size and scope of work. In addition, although automatic flow measurement facilities are in operation, it is difficult to expand them nationwide due to limited field conditions. Therefore, it is necessary to improve the operating infrastructure and environment rather than the measurement technology itself for hydrological investigation. In addition, in terms of flow investigation, it is necessary to schedule an investigation using real-time water level information in order to inventory the accuracy of the water-flow relationship equation and improve work efficiency. Therefore, in this paper, research related to domestic hydrological surveys was analyzed and a hydrological survey scheduling system using real- time water level information based on Open API was implemented to increase the economic and efficiency of hydrological surveys.

• Journal of the Korean Society of Marine Environment & Safety
• /
• v.22 no.7
• /
• pp.807-813
• /
• 2016

The Maritime Traffic Safety Audit Scheme was institutionalized in 2009 to provide for professional surveys, measurement and the evaluation of navigational hazards that might occur in coastal waters in the course of marine work. Related researches that dealt with the reform of the Maritime Traffic Safety Audit Scheme found that there were no rules or regulations for verifying whether marine work conformed to audit results and reviewing the exactitude of ship handling simulations which were a crucial part of the scheme. According to the necessity of adopting an ex post facto management system in the field of maritime traffic, this study analyzed the similar audit acts such as the Natural Environment Impact Audit Scheme and the Road Traffic Safety Audit Scheme, and proposed specific articles for revising Maritime Safety Act in order to break out from the institutional inertia of the current Maritime Traffic Safety Audit Scheme. It is expected that a newly proposed legal system for verifying the performance of audit results and the exactitude of audits will help improve maritime traffic safety by eradicating potentially hidden hazards related to marine work.

• Journal of Korean Society of Occupational and Environmental Hygiene
• /
• v.17 no.3
• /
• pp.254-260
• /
• 2007

Trichloroethylene(TCE) is widely used as a degreasing solvent in workplaces. TCE is primarily toxic to the nervous system, however, systemic disorder like Stevens-Johnson syndrome has been recently reported in small-scale factories, where the government has had limited information of chemical use. A survey was performed to investigate the actual condition of using TCE and to provide practical information to occupational health service agencies and professionals. This survey was carried out on 103 factories out of 430 factories which were conducted periodic work environment measurement for TCE. Degreasing was the most popular reason for using TCE in Korea, which reached to 94%. TCE was also used as a solvent for rubber in the coating or molding process, and adhesives in the bonding process. Metal fabrication was the most common as 23%, followed by assembling automobile parts (17%), and machinery (12%). Workers exposed to TCE during full-shift were 52% while 48% were exposed during short period of the shift or intermittently. Manual or semi-automatic work occupied 87% while automatic work was just 13%. Though automatic work by a closed system was generally lower exposed to TCE, compared to manual work, it can cause a high exposure when the maintenance system is improper. Semi-automatic work especially like open-top degreasing process can cause a high exposure when local exhaust system with condensing and refrigerating coils in the degreaser does not work well. In conclusion, the survey showed nationwide status of TCE exposure in various aspects. It can be used to monitor workplaces and workers exposed to TCE to prevent occupational diseases.