• Textile Coloration and Finishing
• /
• v.6 no.4
• /
• pp.27-33
• /
• 1994

Wool fabrics were treated with low temperature oxygen plasma and/or protease, and examined for their mechanical and dyeing properties. By plasma-treatment the strength of wool fabric increased and higher rate of weight loss for protease treatment was obtained. When dyed by levelling type acid dye equilibrium dye uptake appeared same, but rate of dyeing increased by the plasma treatment, while, with milling type acid dye, both of them increased greatly in the order of untreatedplasma/protease-treated. It was assumed from the above results that plasma affects the surface of fiber, and enzyme attacks mainly the inner part of fiber. This was confirmed again by scanning electron microscope.

• Fibers and Polymers
• /
• v.1 no.1
• /
• pp.59-65
• /
• 2000

In order to investigate psychoacoustic characteristics of fibers, and to compare them with sound physical parameters, each sound of 25 different fabrics consisted of a single fiber such as wool, cotton, silk, polyester, and nylon was recorded. Sounds of specimens were transformed into critical band diagram and psychoacoustic characteristics including loudness and sharpness for each sound were calculated based on Zwicker＇s models. Physical parameters such as the level pressure of total sound (LPT), level ranges (ΔL), frequency differences (Δf), AR coefficients (ARC, ARF, ARE) were obtained in fast fourier transform (FFT) spectrum. Nylon taffeta showed higher values for loudness than 2.5 sone corresponding to human low conversation, while most silk fibers generated less louder showing lower values for loudness than 1.0 sone. Wool fibers had higher loudness mean value than that of cotton, while the two fibers didn't differ in LPT. Loudness showed high positive correlation coefficients with both LPT and ARC. Sharpness values were higher for wool fiber group than other fibers. Sharpness was not concerned with loudness, LPT, and ARC, but the fabrics with higher values for sharpness tended to show higher ΔL.

• Journal of the Korean Society of Costume
• /
• v.21
• /
• pp.19-30
• /
• 1993

There are record that ancient Korean WOOl fabrics male from sheep, camel, rabbit. bear, horse. calile, raccoon dog, fox and so on. Wool fiber fabriher were also reported Kye, Gal, China, Tap Dung, Kuyu anul ram. These wool fabrics wre named amongling to their fineness and weaving method in the fabric. Technology of wool fabric weaving was developed and from Sam Kuk dynasties to to Koryo Dynasty wool fabrics were reported to weave and trade to China, Japan and Arabia. These fabrics were mainly used as clothes, rugs or blankets. In Koryo Dynasty, especially Kye Kurn was used for trading goods to China. There is another record that two thousand sheep, camels offord Koryo by Yo and Kum Dynasty. In this study, the characteristics of Korean wool fabrics will be disscussed from the literature survey of the relevant references.

• Proceedings of the Korean Fiber Society Conference
• /
• 1999.10a
• /
• pp.41-44
• /
• 1999

• Journal of Fashion Business
• /
• v.26 no.4
• /
• pp.100-111
• /
• 2022

After the corona pandemic, when consumers choose clothes, the issue of sustainability has become a more important selection criterion. The eco-friendly functional fiber used in the study is a smartcell, which has functions such as UV protection, decomposition of harmful substances, deodorization, antibacterial and biodegradation. This eco-friendly functional fiber was dyed using five kinds of natural dyes to examine the color change according to dyeability and dyeing conditions. As natural dyes, gardenia, turmeric, sappan wood, lac, and indigo were used. For comparison with smartcell, rayon, a cellulose regenerated fiber, and wool fiber, a protein fiber, were dyed under the same conditions to compare dyeability and color. The study results are as follows. It was found that smartcell had superior dyeability compared to rayon and wool in gardenia dye and showed lower dyeability than wool when dyeing turmeric, sappan wood, and lac dyes, but showed superior or similar dyeability than rayon. In case of indigo dyeing, the dyeability of smartcell was the best when dyed once, but it was found that smartcell had a lower effect on repeated dyeing compared to wool or rayon. Therefore, smartcell has superior dyeability compared to rayon fiber in gardenia, turmeric, sappan wood, and lac dyeing, and in case of indigo dyeing, it is suitable for light dyeing. When smartcell is produced as textile fashion products, natural dyeing is actively introduced and commercialized, and it is hoped that this study can be a reference material.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.22 no.7
• /
• pp.843-850
• /
• 1998

The purpose of this study is the investigation of chemical properties of wool treated with oxidants and protease at low temperature. The chemical degradation of the fibers were investigated by measuring $\alpha$-amimo acid contents and FT-IR analysis. In addition, urea-hydrogensulfite solubility was measured to compare to the oxidation and protease treated wool. The results were as follows. 1) By the oxidation of wool, cystine is oxidised to cysteic acid by way of the intermediate oxides, cystine-S-monooxide and cystine-S-dioxide, in the case hydrolysis catalysed by the protease catalyse. Also, $\alpha$-amimo acid contents is increased, and urea-hydrogensulfite solubility was lower than that of untreated wool. This chemical degradation of wool was occurred due to oxidate hydrolysis in the order of permonosulfate>dichloroisocyanuric acid$\geq$chlorine. 2) The chemical degradation of wool was accelerated by the protease treatment of oxidized wool. Oxidation of wool is considered to make the fiber more susceptibled to enzymatic attact by opening disulphide bond within wool. Enzymatic attact was effectively directed to the wool oxidised by permonosulfate.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.20 no.5
• /
• pp.728-737
• /
• 1996

The purpose of this study is to investigate the change of the chemical properties of wool treated with six kinds of alkali (NaOH, Naac03, NH40H, NH2CH3CH30H, TMAH and BTMAH) with or without CTAB. Content of bound fatty acid liberated from wool surface, elemental composition and allw6rden time were measured to compare the surface modification of untreated and alkali treated wool. Also, the chemical degradation of the fiber was investigated by measuring cystine contents and urea-hydrogensulfite solubility. The result were as follows: 1. By the alkali treatment of wool, the covalently bound fatty acid of the epicuticle was removed and the allworden time was shortened, and in the case of wool treated with TMAH, BTMAH, the allw6rden sacs were formed unevenly and rarely. Also, cystine contents and urea-hydrogensulfite solubility were decreased by alkali treatment on wool. 2. The modification of epicuticle and the chemical degradation of wool were occurred due to alkaline hydrolysis in the order of TMAH, BTMAH > NaOH, Na3c03> NH2CH3CHaOH, NH40H. 3. As a treating time increased, the modification of epicuticle and chemical degradation of wool were accelerated. By the addition of CTAB to the alkali solution, the modification of epicuticle was increase, and the cystine contents and urea-hydrogensulfite solubility were reduced than that of wool teated with alkli without CTAB due to reduction of negative charge on the wool surface by the adhesion of CTAB.

• Journal of Korean Society of Occupational and Environmental Hygiene
• /
• v.15 no.3
• /
• pp.213-220
• /
• 2005

Penetration and health effect of fibers was related with their diameters and length. The purpose of this study is to characterize and compare the diameter and length of airborne man-made mineral fibers(MMMF) or synthetic vitreous fibers in the related industries. The average fiber length of the continuous filament glass, rock wool, refractory ceramic, and glass wool fibers production industries approximately 27, 28, 35, $50-105{\mu}m$. Airborne glass fibers were longest in all the type of MMMFs. The average diameters of airborne fibers generated from refractory ceramic, rock wool, glass wool, continuous filament glass fibers production industries were approximately 1.0, 1.6, 1.5-4 and $10{\mu}m$, respectively. The percentages of respirable fibers(<$3{\mu}m$) were 94% for RCFs, 73% for rock wool fibers, 61.0% for glass fibers, and 1.6% for filament glass fibers. The length of glass fibers were the longest in all types of fibers, and length of the others were similar. The refractory ceramic fibers were smallest in diameters and highest in fraction of respirable fibers.

• Asian-Australasian Journal of Animal Sciences
• /
• v.31 no.6
• /
• pp.775-783
• /
• 2018

Objective: The purpose of this study was to investigate the genetic effects of six keratin (KRT) genes on the wool traits of 418 Chinese Merino (Xinjiang type) (CMXT) individuals. Methods: To explore the effects and association of six KRT genes on sheep wool traits, The polymerase chain reaction-based single-strand conformation polymorphism (PCR-SSCP), DNA sequencing, and the gene pyramiding effect methods were used. Results: We report 20 mutation sites (single-nucleotide polymorphisms) within the six KRT genes, in which twelve induced silent mutations; five induced missense mutations and resulted in $Ile{\rightarrow}Thr$, $Glu{\rightarrow}Asp$, $Gly{\rightarrow}Ala$, $Ala{\rightarrow}Ser$, $Se{\rightarrow}His$; two were nonsense mutations and one was a same-sense mutation. Association analysis showed that two genotypes of the KRT31 gene were significantly associated with fiber diameter (p<0.05); three genotypes of the KRT36 gene were significantly associated with wool fineness score and fiber diameter (p<0.05), three genotypes of the KRT38 gene were significantly associated with the number of crimps (p<0.05); and three genotypes of the KRT85 gene were significantly associated with wool crimps score, body size, and fiber diameter (p<0.05). Analysis of the gene pyramiding effect between the different genotypes of the gene loci KRT36, KRT38, and KRT85, each genotype in a gene locus was combined with all the genotypes of another two gene loci and formed the different three loci combinations, indicated a total of 26 types of possible combined genotypes in the analyzed population. Compared with the other combined genotypes, the combinations CC-GG-II, CC-HH-IJ, CC-HH-JJ, DD-HH-JJ, CC-GH-IJ, and CC-GH-JJ at gene loci KRT36, KRT38, and KRT85, respectively, had a greater effect on wool traits (p<0.05). Conclusion: Our results indicate that the mutation loci of KRT31, KRT36, KRT38, and KRT85 genes, as well as the combinations at gene loci KRT36, KRT38, and KRT85 in CMXT have significant effects on wool traits, suggesting that these genes are important candidate genes for wool traits, which will contribute to sheep breeding and provide a molecular basis for improved wool quality in sheep.

• Proceedings of the Korean Fiber Society Conference
• /
• 1993.06a
• /
• pp.30-31
• /
• 1993