• Journal of the Korean Wood Science and Technology
• /
• 제47권6호
• /
• pp.667-673
• /
• 2019

The performance of a wooden deck made of refractory materials that have difficulties in achieving target penetrations as stipulated in the specification and quality standards for treated wood in Korea, was assessed via a case study in this research. A wooden deck built in Jinju in 2009 was selected for this study because of its fabrication method using pressure and treated refractory materials. The penetration and retention analysis did not satisfy the domestic standard for treated wood. Inspection of the deck in 2019 revealed that the deck had been attacked by decay fungi. Cap rails showed much deeper and wider checking on their surface compared with the top and base rails, resulting in a severe fungal attack. The decking boards exhibited severe fungal decay primarily in the end parts. However, the rails and balusters without checks and posts were virtually free of fungal attack irrespective of the preservative penetration measures. Copper content in the soil 5 cm away from the deck was less than 150 mg/kg, implying that copper movement in the soil was very limited. These results suggest that the inhibition of surface propagation and the protection of end surfaces are essential factors in increasing the longevity of treated wooden decks; further, the results also showed that the deck was within an acceptable range from the point of copper contamination.

• 수산해양교육연구
• /
• 제12권1호
• /
• pp.22-82
• /
• 2000

The ship hull construction materials of fishing boat has changed in order that wooden, steel, and fiber glass reinforced plastic(FRP). The fishing boat made from FRP has increased every year because that materials has proved excellent of the characteries for fishing boats construction members. Recently, FRP tend towards evasion for the pollution of air enviroment. Therefore. the materials of fishing boat construction must be exchanged by another one. Aluminium alloys must be recommended for fishing boats construction mateials because that is light weight and corrosion resisting in the sea water. Regulation of the standard of ship hull construction for aluminium alloys fishing boats did not enact laws in the interior now. Therefore, this regulation was studied by the following items. that is Rudder, Bottom construction, Side hull plate construction, Deck plate construction, piller. Water tight bulkhead, Deep tank, Fish tank, Stern construction, Superstructure, Deck house construction, Hatch, Engine room opening, Hatch opening, Bulwark, Welding and Rivet etc. A study on the regulation will be contributed to enact laws for fishing boat construction of aluminium alloys.

• 한국실내디자인학회논문집
• /
• 제21호
• /
• pp.107-113
• /
• 1999

The purpose of this study is to suggest the materials for developing the new house style by analysing the space characteristics of wood frame houses in suburbs of Seoul. For this, we analysed 45 drawings(site plan, floor plan, elevation, section) that were designed by MICHOO, WOOD-LAND, STUGA and CHOWONJUTECK company etc. The space design characteristics that we found are as follows; 1. The wood is fragile to humidity. Therefore this characteristic is especially considered in designing the space of bathroom and utility room. 2. It is the merit of wood frame house that inner space can be designed variously by using spilt-level and the slope of roof. 3.The public space and private space are completely separated in most cases and the stair is located in the middle of house. This structure of house is short of horizontal openness. Instead, most houses gets vertical openness by making second floor on the living room opev. 4. In wood frame house as the rural house, the outer space is well used by setting up deck and balcony. The outer spaces like deck and balcony are usually used as a part of life space in connected with living room, dining room, master bed room and family room. 5. The public spaces like kitchen, living room, dining room and family room are considered so important in design that those are arranged in front in order to have good outlook and directiov.

• Journal of the Korean Wood Science and Technology
• /
• 제41권1호
• /
• pp.12-18
• /
• 2013

기존의 목재 데크는 보행자의 반복하중으로 못이 인발되어 안전사고가 발생할 우려가 있다. 또한, 데크재와 장선재를 접합 시 접합구에 의하여 목재가 갈라지거나 접합구의 재질에 따라 목재의 부후 속도가 빠르게 진행되는 문제점이 있다. 본 연구에서는 국내 A사에서 개발한 플라스틱 연결구를 사용하여 데크 유닛을 제작, 휨 하중시의 접합내력 성능을 평가하였다. 데크재는 Southern yellow pine (Pinus palustris Miller)을 사용하였다. 접합구의 종류를 달리하여 장선 간 간격(400, 600 mm)에 따른 데크 유닛의 휨 내력 시험을 실시하였다. 시험결과 탄소강 재질의 접합구로 강화플라스틱 연결구에 접합한 시험체의 평균 휨 내력(장선재 간 간격 : 400, 600 mm)이 가장 높게 측정되었으며, 장선재의 폭(40, 50, 70, 80 mm)에 따른 휨 내력 시험 결과 장선재의 폭이 40 mm일때 가장 높은 내력이 측정되었다.

• 수산해양기술연구
• /
• 제28권4호
• /
• pp.412-417
• /
• 1992

In full-speed cruising, the airborne sound pressure levels are measured from 11 small fishing boats operated around Cheju Island. In these measurement, 9 measuring positions are selected in each fishing boats. The results of measurements and analyses are as follows: 1. The sound pressure levels in FRP boats are higher than those in wooden boats. 2. The highest sound pressure level is 112dB(A) at the engine room in C boat, while the lowest one is 72dB(A) at the front deck in K boat. 3. The highest sound pressure level is shown to be in the frequency band less than 500Hz. 4. The highest sound pressure level is shown to be in the frequency band less than 500Hz. 5. Through all 9 positions, the sound pressure levels are higher in B and C boat and lower in E and K boats.

• Journal of the Korean Wood Science and Technology
• /
• 제37권1호
• /
• pp.29-36
• /
• 2009

목재 자원의 부족과 가격 상승에 대항할 수 있는 좋은 대안 중 하나가 목재 부산물이나 폐기물의 재활용이다. 조선 산업에서 얻어지는 목재 폐기물의 경우 기존에는 파쇄 되어 보드류 생산에 주로 사용되어 왔다. 하지만 파쇄를 통한 합판 폐기물의 재활용은 재료의 경제적 가치나 자원의 문제 등을 고려할 때 아쉬움이 많이 남는 처리 방법이다. 본 연구에서는 국내 조선 산업에서 파생되는 목재 폐기물들의 재활용 가능성을 알아보고자 하였다. 국내 조선 산업의 목재 관련 폐기물은 합판 폐기물과 소재 폐기물로 나뉜다. 본 연구를 통해 다음과 같은 결론을 얻을 수 있었다. 1. KS 규격에 따라 합판 폐기물과 합판 적층재의 휨성능을 평가하였다. 2. 합판 폐기물과 합판 적층재의 파괴 모드는 두 종류 모두 simple tension 파괴를 나타내었다. 3. 합판 폐기물과 합판 적층재의 재활용 용도로는 크게 외부 시설용, 내부 시설용 그리고 목조건축 자재로의 용도가 적합하다고 판단되었다. 적정 용도로는 인테리어 재료, 목재 파렛트, 마루판, 사이딩재, 판넬, 야외용 탁자, 데크용 재료 등인 것으로 생각된다.

• 건축역사연구
• /
• 제16권4호
• /
• pp.23-36
• /
• 2007

Many researches on the typology of 'Maru' (Wooden deck) in Korean traditional houses have mainly focused on the high-class houses in the central region of Korea. They were mainly concerned on defining Maru's typology by social status of the owner, based on the researches regarding its physical and spatial properties. Maru in the high-class traditional houses has been served as an essential architectural feature showing the social status of owners as well as adapting in the region of humid and hot summer. This research investigated the typology of Maru's placement in traditional single houses of four Kan in Chonnam province, which shows many differences in its placement according to the regions. Research results show that the typology of Maru's placement and openness is different with the location of houses within the region. This difference affects on the circulation of movement, which eventually affects on the pattern of space use. The difference is also very likely to be affected by the natural environment of geography and climate of the region.

• 수산해양기술연구
• /
• 제40권1호
• /
• pp.54-59
• /
• 2004

최근 개발되고 있는 전자자기 컴퍼스를 이용한 소형어선의 항행자동화시스템을 구축하기 위한 기초 연구로서, 부두에 계류된 선박에서 각종 장비의 가동 시켰을 때 나타나는 컴퍼스 오차 변화를 측정하여 비교 분석한 결과를 요약하면 다음과 같다. 1. 목선에서 85kW의 집어등을 점등하였을 때, 조타용 자기컴퍼스는 7$^{\circ}$편서되었고, 전자자기 컴퍼스는 13$^{\circ}$~16$^{\circ}$ 까지 편서되는 것으로 나타났다. 2. FRP 어선에서 13OkW의 집어등을 점등하였을때, 전자자기 컴퍼스는 19$^{\circ}$~23$^{\circ}$ 까지 편동되는 것으로 나타났다. 3. 강선에서 225kW의 전력으로 각종 장비를 가동 시킬 때, 가동전과 비교하여 컴퍼스 오차의 차분은 조타용 자기 컴퍼스에서는 13$^{\circ}$ 편서되고, 전자자기 컴퍼스는 상갑판에서는 68$^{\circ}$ 편서되었고, 선수루 갑판과 조타실 및 컴퍼스갑판에서는 각각 16$^{\circ}$, 32$^{\circ}$, 20$^{\circ}$ 편동되어 나타났다. 4. 소형어선의 항행자동화시스템에 전자자기 컴퍼스를 활용하기 위해서는 선박내에서 사용하는 각종 장비에 의해 발생하는 컴퍼스 오차를 측정하여 적절하게 수정하여 사용해야 할 것으로 판단된다.

• 한국태양에너지학회 논문집
• /
• 제28권3호
• /
• pp.35-44
• /
• 2008

In this study, the experiment of the measuring of four different types of flooring materials' thermal characteristics was conducted and examined during the summer. The experimental materials were arranged on the existing slab of the roof, and then its thermal characteristics were examined from the point of view of thermal radiation analysis. The aim of this study is ultimately to draw the fundamental data for improvements in a building's thermal function and reduce the urban heat island phenomena through optimizing the thermal characteristics of the surface covering materials of a building. The results from this study are as follows; 1) Each experimental material's albedo was calculated as 0.83 on the aluminum panel, 0.40 on the rock block, 0.37 on the wood deck and 0.21 on the concrete. It shows that the concrete material, which has the lowest short wave reflective rate, absorbed the most radiation energy and the aluminium panel has absorbed the lowest radiation energy. 2) From the each experimental object's value of the long wave radiation, the concrete material measured the highest, at $628W/m^2$, and the aluminium panel measured the lowest at $412W/m^2$. Therefore, it verifies that the experimental objects' own radiation rate determines the amount of the long wave radiation. 3) The degree of energy absorbency of a building's surface covering materials is greatly influenced by its own albedo and radiation rate, Therefore, it needs to be considered for the improvements in a building's thermal function and reducing the urban heat island phenomena. 4) According to the evaluation result of the each experimental object's overall heat transmission screening function on the roof of a building, the wooden deck is proven to be an excellent material for excluding the outside temperature differences effectively with its characteristic of low heat capacity and conduction. Also its surface temperature on the roof slab and the temperature difference during the day were both measured at low.

• 대한조선학회지
• /
• 제8권1호
• /
• pp.67-94
• /
• 1971

Korean fisheries industry holds 57,255 boats amounting to 269,079 tons in gross as of the end of 1967. The boats of the size under 30G.T., about sixty-two per cent of the total in tonnage, are utilized in coastal and their contribution to the total production of Korean fisheries industry is estimated at over seventy-five percent. Hull forms and construction method of them are partly in transition stage to the western tradition from the oriental tradition, which employs the chine-type straight-framed section, and tick and wide wooden planking fastened on naturally bent timber frames. And only about a half of them are mechanized. About fifty-seven per cent, 7,525 boats amounting to 91,751 gross tons, of the coastal and inshore fishing boats are those of the size ranging 5G.T. to 30G.T., which are engaged mostly in draft-and gill-netting, angling, longlining, anchovy seining, squid fishing and set-netting. The important fishing boats forming main structure of the inshore fishing fleets can be classified as 5G.T.-class multi-purpose boats, 10G.T.-class angling/longlining boats and 20G.T.-class drift-/gill-netters mostly utilized in the east-sea, 15G.T.-class anchovy seiner in the south-sea-sea, 20G.T.- and 28G.T.-class stow-netters in the west sea. Each of the three sea regions, east, south, and west, of Korean water has distinctly different characters from one another in topography, geology and sea aspects, and consequently in marine resources, fishing grounds and fishing tactics desired. Hence, the finishing boats in each sea region have also their own characters in hull form, structural features, deck design and equipments. In this report, analyzing the characteristics of the existing inshore fishing boats ranging 5G.T. to 30G.T. in size from view points of naval architecture and engineering, the author made an integrated investigation of their characteristics, covering size and principal dimensions, hull form, deck design, structural features and mechanization, in close connection with the natural circumstances of Korean water and local techno-socio-economic problems, and, finally, made some suggestions for the rational improvement or modernization of the inshore fishing boats. Further details of the characteristics of Korean inshore finishing boats are referred to the drawings of them compiled by the author and given in the reference[23] listed at the end of this report.