• Journal of the Korean Wood Science and Technology
• /
• v.36 no.1
• /
• pp.21-29
• /
• 2008

The deterioration of Korean traditional wooden house located in seoul was estimated. This house was attacked by termite. To estimate damage status of buildings, non-destructive methods were applied. Some of the post needed to be replaced due to low strength, estimated by nondestructive methods. The house was installed with boiler heating facility, to use office and public education. This kind of heating system changed the environmental condition of the wooden house. The termite which attacked the house was classified as Reticulitermes speratus. Because of durability of wooden house effected by environment, control of the environmental condition is essential for maintaining the wooden house. The installation of modern facility to traditional wooden house should not change the traditional structure and do not effect to durability of wooden house.

• Journal of the Korean Wood Science and Technology
• /
• v.49 no.6
• /
• pp.550-565
• /
• 2021

This study's objective was to conduct species identification and tree-ring dating of wooden elements used in Mungyeong Juheulgwan of Joryeong (Gate No. 1). Of the 84 wooden elements evaluated, 76 were confirmed to be hard pines, 5 were soft pines, and 3 belonged to Abies spp. For tree-ring dating, cores of the wooden elements were collected using a drill, and ring-width plots of individual samples were constructed using the TSAP software. The results of performing tree-ring dating for the outermost ring of 59 hard pine wooden elements revealed the following 4 felling dates: summer of 1708-late fall of 1709, summer of 1792-early spring of 1794, late fall of 1838-early spring of 1840 and 1867, and early spring-fall of 1872. These felling dates were found to be consistent with those in the construction and repair records of the Annals of Joseon Dynasty, Juhulgwan Jungsugi, and those engraved on Juhulgwan Walls. It is believed that some of the wooden materials harvested at that time were stored and used since there was a difference of approximately10 years between the repair records and felling dates.

• Journal of the Korea Furniture Society
• /
• v.24 no.1
• /
• pp.104-112
• /
• 2013

Monitoring for moisture contents of wooden post member of Un-bong confucian school was performed in 6 months and analyzed to conserve scientifically the wooden culture building and open for common people. In inner post member of the building, variation of moisture contents was very small and upper part had relatively higher moisture contents. In outer post member, moisture contents were changed according to the weather conditions and was relatively high in bottom and upper part. Southern post has lower moisture content than eastern. These results were related to air ventilation in interior, depth of eaves and orientation of the building. In the design, construction and maintenance of wooden building, characteristics of wood should be considered like moisture contents.

• Journal of the Korea Furniture Society
• /
• v.20 no.6
• /
• pp.575-580
• /
• 2009

This study was carried out to manufacture wooden vessels by small diameter wood and wasted wood of Castanea crenata Sieb. et Zucc, which has been largely planted in southern area. We made spice set, tea box set, cookie vessel set, bowl set and accessory set. With the development of edged tools, the human species has been able to fashion wood to change and enhance its environment - one only has to look at the history of all cultures to see examples of wooden artifacts and structures. Even with the development of synthetic materials and the progress of automated, mechanized production of wood and wood products, the raw material is still processed by traditional methods to meet a never-ending demand for products made from this most desirable natural material. Chestnut wood has high added value and natural color grain and is very useful for wooden vessel. Thinned low grade trees can be used to produce wooden vessel. Therefore this result can promote thinning and produce good forestation.

• Journal of the Korean Wood Science and Technology
• /
• v.44 no.4
• /
• pp.589-599
• /
• 2016

Korean wooden cultural heritages are treated by flame retardants to protect fire hazards. Two types of flame retardants are used to treat wooden cultural heritage. These flame retardants cause some problems such as surface whitening, discoloration, and cracks due to the chemical reaction caused by Korean traditional wood painting (Dancheong), flame retardant and wood humidity. The Korean government is trying to cut down on the amount of flame retardants for the wooden cultural heritage because of these problems. This study was carried out to find the cause of whitening by flame retardants treatment. The reaction between pigment and flame retardant chemicals was analyzed by infrared spectroscopy.

• Journal of the Korea Safety Management & Science
• /
• v.18 no.2
• /
• pp.83-92
• /
• 2016

Because National Fire Safety Codes is mixed performance criteria and specification, and it defines the fire extinguish equipment type and standards that need to be installed in a building as one method. Therefore, to fully reflect the fire risk characteristics of the building, such as the wooden building there is a limit. In this study, suggested to the performance criteria drawn methodologies through fire load of wooden buildings studies, theory on performance and performance analysis to fire extinguish equipment of the wooden buildings is installed according to current fire safety codes.

• Journal of the Korea Safety Management & Science
• /
• v.11 no.1
• /
• pp.59-65
• /
• 2009

The aim of these studies is to confirm the red and blue painting damages during the fire suppression of wooden cultural assets by using the loaded stream charge extinguishant. As a results of these experiments, the ingredients of extinguishant existing on the surface of wooden cultural assets were perfectly eliminated by the water washing only. Any changes on the surface of wooden cultural assets couldn't be detected. Moreover, any color changes of the red and blue painting didn't occur.

• Journal of architectural history
• /
• v.24 no.5
• /
• pp.41-48
• /
• 2015

Quantitative analysis of termites damage is important in terms of conservation and maintenance of wooden cultural heritage buildings, because termites makes cavities and decreases the section area of wooden structural members. The purpose of this study is to forecast the range and spread of termites damage in the wooden structural members by using ultrasonic pulse velocity method. Ultrasonic pulse velocity has been used as one of non-destructive test to analysis the internal defect by using difference velocity between medium material and cavity. This method would be effective to analysis termites damages. From the result of the ultrasonic velocity test, the loss rate of area effected by termites damage had a strong correlation with ultrasonic velocity. And it is possible to predict the loss rate of area from by termites damage by using regression equation in the case of structural member of fine tree.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.13 no.8
• /
• pp.790-796
• /
• 2002

In our country, historically beautiful and significant wooden architectures are preserved as the cultural properties. For a long time, however, the architectures are often exposed to rough environmental conditions, such as weathering, insect attack, etc. This may lead to deterioration of structural integrity of the architectures. Therefore, it is necessary to diagnose wooden architectures in advance. In this paper, the possibility of a subsurface-penetrating radar(SPR) fur non-destructive testing(NDT) of wooden architectures is investigated by using the three-dimensional finite-difference time-domain(FDTD) simulation and actual laboratory measurement.

• Journal of the Korea Furniture Society
• /
• v.19 no.4
• /
• pp.252-259
• /
• 2008

High glossy painting and UV lithographic painting as painting methods for wooden furniture have played a positive role in enhancing the diversity of furniture design, which has been proved by the analysis on the relationship between the change in the diversity of design and painting methods of graduation projects (wooden furniture) presented by graduates of local universities, as a focus of this article. Since the development of new painting methods has the potential to develop aesthetic characteristics of wooden furniture, many design experiments are needed to improve decorative features of furniture, such as the application of high glossy painting and UV lithographic painting.