• 한국태양에너지학회:학술대회논문집
• /
• 한국태양에너지학회 2012년도 춘계학술발표대회 논문집
• /
• pp.475-479
• /
• 2012

Thermal energy storage (TES) systems using Microencapsulated phase change material (MPCM) have been recognized as one of the most advanced energy technologies in enhancing the energy efficiency and sustainability of buildings. We examined a way to incorporate MPCMs with building materials through application for wood-based flooring. Wood-based flooring is commonly used for floor finish materials of residential buildings in Korea. However, wood-based flooring has not performed the characteristic of heat storage. This study is aimed at manufacturing high thermal efficiency wood flooring by increasing its heat storage using MPCM. As a result, this study confirmed that MPCM is dispersed well in adhesive through the scanning electron microscopy analysis. From the differential scanning calorimetry analysis, it can be confirmed that this composite has the characteristic of a thermal energy storage material. Also, we analyzed how this composition was formed by physical combination through the Fourier transform infrared analysis. Also, we confirmed the bonding strength of the material by using the universal testing machine.

• 대한건축학회논문집:구조계
• /
• 제34권1호
• /
• pp.53-60
• /
• 2018

For test on flooring board laminated with PVC decoration materials in order to replace the current surface materials such as HPL in decoration wood-based flooring board. the Results of comparison and analysis are as follows: For thermal conductivity, flooring board decorated with PVC did not show huge differences when temperature was rising and lowering compared to the flooring materials laminated with the existing HPL surface materials. It seems the most meaningful results for using it as indoor flooring materials. That is, in Korea where there is the culture focusing on ondol heating, use amount of heat energy and efficiency of flooring materials are very important and sensitive issues, involving immediately with household economy of final consumers, and it might be a criteria to judge basic performances required as flooring materials. As a result of the analysis on mandatory durability test items such as abrasion resistance, absorption width expansion rate, impact resistance, surface hardness, and impact absorption for flooring materials, compared to flooring board laminated with general HPL surface decoration materials, decoration wood-based flooring board laminated with PVC surface decoration materials which is higher abrasion resistance with smaller transformation and has better durability and impact absorption of the surface, is available for actual application as indoor flooring board, and for replacing surface decoration materials impregnated with heat-hardened resion such as HPL.

• Journal of the Korean Wood Science and Technology
• /
• 제36권2호
• /
• pp.39-45
• /
• 2008

Formaldehyde and volatile organic compounds (VOCs) are emitted from wood-based panels that have been made using wood particles, wood fiber, wood chips, formaldehyde-based resins and so on. In this study, we examined formaldehyde and total VOCs (TVOC) emission behaviors for plywood overlaid with water-soluble phenolic resin impregnated linerboard (PL), and two kinds of surface materials (decorative veneer and pre-impregnated finishing foil) that were adhered onto the PL that named DPL and PPL. EVA (ethyl vinyl acetate) was used to overlay the decorative veneer and pre-impregnated finishing foil on the plywood with water-soluble phenolic resin impregnated linerboard by a hot press instrument. The debonding test and accelerated aging test were conducted to assess their mechanical properties. Formaldehyde and TVOC emission concentrations were measured using the FLEC method and a VOC Analyzer, respectively. The debonding test results of PL, DPL and PPL were 1.2, 1.5, and $0.5N/mm^2$, respectively. The surface appearance of the samples were not changed after the accelerated aging test. The PL and DPL exhibited reduced formaldehyde and TVOC emission levels, respectively. In the case of PPL, the VOC value was relatively higher than those of PL and DPL.

• Journal of the Korean Wood Science and Technology
• /
• 제46권2호
• /
• pp.149-154
• /
• 2018

The changes in sound absorption capability and air permeability of Malas wood after high temperature heat treatment were investigated. The average air permeability of Malas in longitudinal direction after heated under the temperature of $190^{\circ}C$ during 3 hours was about 23.48 darcys and that of control was about 3.11 darcys. The noise reduction coefficients of Malas specimens were 17% for treatment and 10% for control. The means of sound absorption coefficient of specimens in the frequency range of 50~6,400 Hz were 42% for treatment and 17% for control, respectively.

• 펄프종이기술
• /
• 제46권5호
• /
• pp.61-68
• /
• 2014

The energy efficiency of papermaking process becomes more significant because of various new regulation of the energy consumption and the green house gas emission. In this study, the effects of wood powder addition on the drainage and the drying efficiency of the OCC based paper products, linerboard, were deeply investigated for improving energy efficiency. The fractionation of wood powder depending on the size were conducted. The bigger size of wood powder resulted in the higher bulk and the higher drainage efficiency, but the lower paper strength. The drying efficiency were in detail evaluated depending on the drying process level. In the first section of drying process until the 80% solid level, there were no significant changes in the drying efficiency by the addition of wood powder. However, after the 80 % solid level, the drying efficiency was greatly improved by the addition of wood powder. Those results showed the addition of wood powder could greatly affect not only the drainage in forming and wet pressing but also the drying process.

• Journal of the Korean Wood Science and Technology
• /
• 제49권4호
• /
• pp.336-359
• /
• 2021

본 연구는 고층 목조건축에 사용되는 대형 목재 패널인 CLT의 낮은 rolling shear strength를 개선하기 위해 hybrid CLT의 연구 개발 동향을 분석하였다. 이를 통해 CLT의 국산화를 위한 연구개발 방향에 활용 가능한 기초자료를 마련하고자 하였고, 낮은 rolling shear strength를 향상시키기 위한 방안으로 활엽수 층재 사용, 층재 배열 각도 변화, 구조용 목질복합체의 사용이 주를 이루고 있다. 활엽수 층재는 침엽수 보다 rolling shear strength와 shear modulus 모두 2배 이상의 높은 값을 나타내므로 활엽수 층재 사용 및 미이용 수종의 활용이 가능함을 확인하였다. 층재 배열 각도 변화에 따라 rolling shear stength 1.5배, shear modulus 8.3배, bending stiffness 4.1배 향상되어 층재 배열 각도를 감소시킴으로써 CLT 강도 향상을 확인하였다. 구조용 목질재료는 기존에 강도성능이 확보된 재료로 층재로 사용하였을 때 최대 MOR 1.35배, MOE 1.5배, rolling shear strength 2배 향상되었고, 층재 간의 접착강도 또한 집성재 블록전단강도 기준인 7.0 N/mm²을 확보할 수 있었다. 선행연구결과를 통해 MOE 7.0 GPa, MOR 40.0 MPa 이상의 휨 특성을 가진 구조용 목질재료를 사용하였을 때 강도성능이 향상됨을 확인하였다. 이를 통해 구조용 목질재료 층재 강도 기준으로 판단하였다. rolling shear strength 개선하기 위한 최적의 방법은 기존 규격에 의한 강도값을 가진 구조용 목질재료의 적용이 가장 유리할 것으로 판단하나, 구조용 목질재료의 섬유 배열에 따른 CLT 층재 배열 방향, 층재 간 접착 강도 등에 대한 추가적인 연구가 필요하다.

• Journal of the Korean Wood Science and Technology
• /
• 제44권1호
• /
• pp.57-66
• /
• 2016

이 연구에서는 환경부하가 적은 산림훼손지 생태복원재료의 개발을 목적으로, 콘크리트와 국내산 침엽수 4종, 국내산 활엽수 3종의 제재라미나를 복합적층하여, 휨 크리프 성능에 미치는 수종의 밀도의 영향을 조사하였다. 목재-콘크리트 복합적층재의 휨 크리프곡선은 수종에 관계없이 시간에 따라 크리프곡선의 우측상변이 현저히 증가하는 형태를 나타내었고, 하중부하 후 약 30분 - 1시간 이후에서는 목재 및 목질재료와 같이 거의 직선적인 거동을 나타내는 것이 확인되었다. 목재-콘크리트 복합적층재의 초기변형은 수종의 밀도의 증가에 비례하여 변형이 감소하였고, 이 값은 콘크리트의 0.9 - 1.2배의 값을 나타내었다. 목재-콘크리트 복합적층재의 크리프변형은 콘크리트의 0.4 - 0.8배의 낮은 값을 나타내어 복합적층에 의한 콘크리트의 크리프변형의 현저한 감소가 확인되었다. 목재-콘크리트 복합적층재의 상대 크리프는 8.2 - 17.0%의 범위로 복합적층에 의해 콘크리트의 그것보다 0.3 - 0.7배의 매우 낮은 값을 나타내는 것이 확인되었다. 이 결과는 목재와 콘크리트의 복합적층에 의해 기존 콘크리트재료의 크리프변형을 감소시킨 산림훼손지 생태복원재료로 응용가능성을 나타낸다.

• Journal of the Korean Wood Science and Technology
• /
• 제44권2호
• /
• pp.283-293
• /
• 2016

Owing to an increase in the air tightness of recent buildings, the natural ventilation rate was significantly lowered and the removal of accumulated moisture became difficult in these buildings. The hygrothermal performance of these buildings should be carefully considered to provide comfortable indoor environment by removing the moisture condensation risk and the mold growth potential. In this study, hygrothermal performance of two selected wall structures was investigated based on WUFI simulation program. The results displayed that the indoor temperature had impact on the moisture accumulation in the insulation layer for both modeled walls, showing that lower indoor temperature resulted in higher moisture accumulation, especially in the wood frame structure. Also, the yearly moisture accumulation profile exhibited a downward shift throughout the year by adding a vapour retarder with a lower sd-value. In addition, both of the two walls have condensation risk in winter, due to low temperature level. The wood frame structure has a bigger fluctuation and higher condensation risk than the concrete structure.

• 한국가구학회지
• /
• 제27권1호
• /
• pp.8-14
• /
• 2016

Increasing concerns of environment need to make change furniture field to more environmentally friendly approach, such as reuse of by-products from wooden products. As it is, the methods of recycling wood for industrial purposes have the advantage of productivity and adaptability. However, the industrial way is required a certain production facility of processing wooden by-products and has possible hygienic problems due to contaminated sources. Many designers have developed their own methods for reuse of wood in unique and artistic ways. Even so, because of confined sources, it could be not enough supply. Therefore, I developed the design methodology utilizing wooden by-products from S Design Company to relieve former ways' problems. The design suggestion took materials from a safe and abundant source. The wooden leftover pieces were connected together with epoxy clay, so previous process traces of furniture are remained as a decorative factor. Moreover, the synthesized material was able to be processed by ordinary woodworking facilities without additional installations. In doing so, console table focused on a commercial purpose and dining table for an artistic objective were successfully fabricated as final suggestions. In consideration of the proposal using wooden furniture leftovers, diverse recycling designs should be investigated for future reference.

• Journal of the Korean Wood Science and Technology
• /
• 제41권4호
• /
• pp.346-357
• /
• 2013

본 연구에서는 국내 숲가꾸기산물을 이용하여 목재펠릿을 제조하고 품질을 분석하였다. 원료는 일본잎갈나무(Larix kaempferi C.)와 활엽수 혼합 수종을 사용하였으며, 말구직경 6 cm를 기준으로 침엽수와 활엽수로 구분하였다. 분쇄 후 건조된 원료를 이용하여 목재펠릿을 제조하였다. 분쇄와 건조공정을 동일 조건에서 수행하였음에도 불구하고, 원료의 물리 화학적 차이에 따라 생산되는 목재펠릿의 품질에 차이가 발생하였다. 활엽수 혼합수종으로 제조한 목재펠릿은 회분이 1.6% 이상으로 분석되었으며, 일본잎갈나무의 경우에는 직경 6 cm 이하의 소경목에서 회분이 1.0%를 초과하였다. 목재펠릿을 제조하기 이전의 원료 상태에서와 비교하여 제조 후에 회분함량이 0.01~0.1% 정도 상승하는 것을 확인하였다. 발열량에서는 일본잎갈나무가 활엽수 혼합 원료에 비해 약 198 kcal/kg 정도 높았으며, 모든 시료에서 4,300 kcal/kg 이상으로 목재펠릿 원료로 적합한 것으로 분석되었다. 또한, 원료 상태보다 목재펠릿 제조 후 발열량이 일부 상승하는 것을 확인하였다. 원료에 포함된 주요 무기물은 수종 및 분류에 관계없이 Ca, K, Mg, Mn, Fe 등이었으며, 장기 연속 운전을 위해서는 연소기 내 클링커 형성을 억제할 수 있는 연소 방법의 개발이 요구된다. 동일한 펠릿 제조 조건에서 원료에 의해 제품 간의 품질 편차가 크게 발생할 수 있으며, 이를 극복하고 생산성 및 품질 향상을 위해서는 원료에 따른 공정 최적화가 중요한 요소임을 확인하였다.