• Journal of the Korean Wood Science and Technology
• /
• v.42 no.5
• /
• pp.516-522
• /
• 2014

Old architectural wood materials damaged by a fire were evaluated on the basis of wood species and scanning electron microscopy (SEM) observation of wood tissues in combination with energy dispersive X-ray spectroscopy (EDXS) analysis. Results of SEM observation showed that tracheid wall thickness of burned parts was very thin compared with undamaged and sound wood, and tylosoid in the resin canals disappeared after the exposure to fire. SEM-EDXS analysis indicated that carbon and oxygen peaks occurred in the original energy band, and the carbon peak was higher than that of the oxygen in the burned part. A computerized tomography was also undertaken to investigate the carbonization layer formed by fire and possible internal defects.

• Journal of Plant Biology
• /
• v.33 no.4
• /
• pp.285-292
• /
• 1990

In order to elucidate the formation of reaction tissues during the transition from primary to secondary growth, the developmental anatomy was conducted in the first internode of Ginkgo biloba seedling in horizontal position. The righting of the horizontal first internode took place at the middle portion and gradually proceeded to the base during the primary growth. Reaction tissues were formed corresponding to the righting movement in the horizontal first internode. During the transition from primary to secondary growth, compression wood was gradually developed on the lower side only. The anatomical features of compression wood also extended longitudinally to the lower side of the vertical portion where it coincided with the lower side of the horizontal first internode occurs acropetally from basal to apical portion. Eventually, some of the anatomical features of compression wood occurred at the primary growth. And the typical compression wood is gradually established during the secondary growth. On the other hand, the lower side tracheid and ray were longer and higher than those of the upper side in the horizontal first internode. However, difference in the width of ray was not observed between the lower and upper sides.

• Journal of the Korean Wood Science and Technology
• /
• v.52 no.3
• /
• pp.243-261
• /
• 2024

In this study, samples were collected from various ancient wooden shipwrecks, including the Shinan shipwreck and Jindo shipwreck that used iron nails, the Yeongheungdo shipwreck carrying iron artifacts, as well as the Sibidongpado shipwreck and Wando shipwreck where degradation products were not observed, all of which were salvaged by the National Research Institute of Maritime Heritage. The aim was to analyze the characteristics of degradation products generated by iron (Fe) within the salvaged wooden shipwreck materials and establish fundamental data on degradation products in waterlogged archaeological wood. The analysis revealed that sulfur (S) is generally accumulated in wood obtained from marine environments. It was observed that the content of inorganic substances such as iron and sulfur was significantly higher in the Shinan shipwreck, Jindo shipwreck, and Yeongheungdo shipwreck compared to Sibidongpado shipwreck and Wando shipwreck, which used wooden nails. This indicates that the presence of iron affects the accumulation of degradation products and suggests that iron is a factor in the corrosion of wood. Furthermore, crystallin compounds were observed within the cell walls, and higher concentrations of iron and sulfur were found in the resin ducts, rays, and radial tissues. This suggests that during desalination and consolidation treatments, warm water or polyethylene glycol (PEG) may move degradation factors into resincanals, rays, radial tissues, etc.

• Journal of the Korean Wood Science and Technology
• /
• v.42 no.2
• /
• pp.138-146
• /
• 2014

Stem and root of Lindera erythrocarpa were described and compared in the wood anatomical aspects. Root wood appeared to differ from stem wood in the qualitative features of growth ring boundary, extraneous materials in vessel element and ray parenchyma cell, outline of ray, and sheath cell. In the quantitative features, there were differences between these two tissues in vessels per square millimeter, tangential diameter of vessel lumina, length of vessel element, and width of ray. These wood anatomical differences between stem above ground and root below ground were thought to be attributed to their different growth environments.

• 한국문화재보존과학회:학술대회논문집
• /
• 2004.10a
• /
• pp.66-71
• /
• 2004

When waterlogged wood dries up, it shrinks largely. And it is hard to recover original shape. Therefore it happens to lose the value of wood remains frequently. This paper studied how far dried waterlogged wood can recover original shape. Shape recovering course and extent are thoroughly investigated after waterlogged wood of Pinus densiflora, Quercus serrata and Styrax japonica oven-dries and instills varieties of test solution. At 1- step, oven-dried samples infiltrated by chlorous acid sodium or sodium hydroxide solution. At 2- step, wood tissues of samples were swelled by the fast decompression after infiltrating $CO_2-supercritical$ fluid at high pressure. The study investigated the possibility of shape recovering in waterlogged wood. Shape recovering rate is different with solution and wood species. Sample of sodium hydroxide solution doesn't swell anymore when using $CO_2-supercritical$ fluid. In general, the sample of sodium hydroxide solution has higher Shape recovering rate than $CO_2-supercritical$ fluid solution treated by chlorous acid sodium.

• Journal of the Korean Wood Science and Technology
• /
• v.46 no.3
• /
• pp.253-259
• /
• 2018

To determine the depth of preservative penetration in ACQ treated wood, the degree of penetration of Cu was measured. In this study, we developed a DDAC coloring method to investigate the penetration depth of DDAC, which is one of the active ingredient of ACQ, into wood. The following conclusions were obtained. The DDAC component reacts with a 2', 7'-dichlorofluorescein indicator and results in a deep orange color. This orange coloring reaction appears not only in DDAC solutions but also in ACQ treated wood tissues in which DDAC is present. It is possible to visually verify that DDAC has better wood penetration than Cu in the spruce, which is an refractory wood species, by the DDAC coloring method developed this study. In addition to the results, it is necessary to investigate the difference in penetration of Cu and DDAC for other wood species with poor preservative penetration.

• Journal of Plant Biology
• /
• v.35 no.3
• /
• pp.211-217
• /
• 1992

In order to elucidate the formation of reaction tissues during the transition from primary to secondary growth, the developmental anatomy was conducted in the first internode of Acer sacchan'num seedling in horizontal position. During the transition from primary to secondary growth, tension wood(gelatinous fiber) was gradually developed on the upper side only, And the tension wood formation in the upper side of the horizontal first internode proceeds acropetally from base to apical portion. Some of the anatomical features of tension wood start to be in the primary vascular tissue and a typical tension wood show during the secondary growth, Therefore, the procambium seems to respond to the gravity as well as vascular cambium. For this reason, both procambium and vascular cambium has to regard as the same meristem, On the other hand, the upper side vessels were longer than those of the lower side in the horizontal first internode. The lateral-wall pitting of vessel elements, however, showed no differences between upper and lower sides which have alternate type. The width and height of rayon the upper side of horizontal first internode was larger as compared with the lower side.r side.

• Journal of the Korean Wood Science and Technology
• /
• v.50 no.6
• /
• pp.490-498
• /
• 2022

The current study aimed to verify the image segmentation ability of rays in tangential thin sections of conifers using artificial intelligence technology. The applied model was Mask region-based convolutional neural network (Mask R-CNN) and softwoods (viz. Picea jezoensis, Larix gmelinii, Abies nephrolepis, Abies koreana, Ginkgo biloba, Taxus cuspidata, Cryptomeria japonica, Cedrus deodara, Pinus koraiensis) were selected for the study. To take digital pictures, thin sections of thickness 10-15 ㎛ were cut using a microtome, and then stained using a 1:1 mixture of 0.5% astra blue and 1% safranin. In the digital images, rays were selected as detection objects, and Computer Vision Annotation Tool was used to annotate the rays in the training images taken from the tangential sections of the woods. The performance of the Mask R-CNN applied to select rays was as high as 0.837 mean average precision and saving the time more than half of that required for Ground Truth. During the image analysis process, however, division of the rays into two or more rays occurred. This caused some errors in the measurement of the ray height. To improve the image processing algorithms, further work on combining the fragments of a ray into one ray segment, and increasing the precision of the boundary between rays and the neighboring tissues is required.

• Journal of the Korean Wood Science and Technology
• /
• v.36 no.6
• /
• pp.130-137
• /
• 2008

In this study cadalene, which is classified into sesquiterpenes constructed with 15 carbons of naphthalene skeleton, was isolated from ethanol extracts of Zelkova wood (Zelkova serrata) using successive silica gel column chromatography. The purified cadalene compound was subjected to structural analysis using HPLC, EI-MS and $^1H$, $^{13}C-NMR$. Its molecular weight was measured to 244 (m/z) and methyl and isopropyl group were attached at C1 and C4 position, as well as hydroxyl group at C7 and methoxyl group at C3 in the naphthalene skeleton, respectively. Yield of 7-hydroxy-3-methoxycadalene amounts to 0.03% based on air dried Zelkova wood powder. It was distributed only in xylem tissues(only in heartwood) of Zelkova wood, not in leaves and bark.

• Journal of Forest and Environmental Science
• /
• v.33 no.4
• /
• pp.322-329
• /
• 2017

As a result of contemporary environmental concerns, a number of studies from plants' tissues as one of the alternatives to conventional chemicals are increasingly investigated. In tandem with these trends, Lagenaria breviflora (LB) fruit, reputed as antiviral and depilatory agents in the Yoruba folkloric medicine was examined on Vitex doniana wood to ascertain its antifungal activity. Fungicides of 25%, 50%, 75%, and 100% LB fruits formulations (concentrations) were developed through simple one-step mechanical-forming process, including control. In this study, the yield, the chemical compositions, the absorption capacity of the fungicides and wood weight losses (WWL) analysis were evaluated to investigate the antifungal activity of LB fruit on wood. The fruit extract yielded 35.4% of fresh juice weight. LB fruits contained total: alkaloids ($8.78{\pm}0.21mg/mL$), flavonoids ($2.01{\pm}0.02mg/mL$), phenol ($7.42{\pm}0.09mg/mL$), saponins ($11.00{\pm}0.10mg/mL$) and tannins ($5.47{\pm}0.05mg/mL$) contents. All the formulations provided effective protection against the tested wood fungi compared to control. Interestingly, the antifungal activity of 50% and 25% formulations of 6.8% WWL and 9.9% WWL satisfied the excellent fungal resistance class description against white rot fungus (Ganoderma lucidum) and brown rot fungus (Fibroporia vaillantii), respectively according to ASTM D 2017. These results thus, support LB fruit as a strong potential source of natural antifungals for industrial wood production.