• Journal of Mushroom
• /
• v.21 no.3
• /
• pp.110-117
• /
• 2023

Cordycepin (3'-deoxyadenosine) is a nucleoside analog known for its diverse range of biological activities. This study investigated the effect of different types of sawdust on the production of the bioactive compound cordycepin. The results of the study showed that different types of wood sawdust affected the biosynthesis of cordycepin and a significant increase was observed when the conventional SDB medium was replaced with 1% NaOH treated pine sawdust. To optimize cordycepin production from Paecilomyces tenuipes in a medium containing 1% NaOH-pretreated pine sawdust, we employed Response Surface Methodology (RSM) in its Box-Behnken design (BBD) canonical form. The optimal conditions were determined as follows: a particle size of 109.5111-mesh (140 ㎛) for 1% NaOH-pretreated pine sawdust, an input weight of 21.1679 g/L, and an incubation time of 73.8423 hours. According to our model, this combination is expected to yield a maximum cordycepin content of 896.1428 ㎍/mL. Experimental validation of this prediction was performed using the suggested optimal conditions, resulting in an average cordycepin content of 922.6771 ㎍/mL across three replicates, thus confirming the model's accuracy.

• 한국연소학회:학술대회논문집
• /
• 2007.05a
• /
• pp.63-68
• /
• 2007

An experimental study was carried out to investigate gasification process of wood sawdust in the 1-dimensional downdraft fixed bed gasifier. The preheated air which was used oxidizer and steam were used as a gasifying agent. The downdraft fixed bed gasifier obtains more amount of hydrogen and methane by increasing residence time of supplied air. The operating parameters, the supplied air temperature and steam were used. The oxidizer temperature was varied from 500K to 620K and vapor was added. The gasification process was monitored by measuring temperature at three position near the biomass using R-type thermocouples and the syngas composition was analyzed by gas chromatograph. We get the sample gas at the end of gasifier and it was eonugh time to finishing the chemical reaction. Finally, the amount of hydrogen and methane were increased widely as increasing the oxidizer temperature and adding steam.

• Korean Journal of Organic Agriculture
• /
• v.21 no.3
• /
• pp.305-319
• /
• 2013

In this study, it is intended that utilize the LCA (Life Cycle Assessment) method, to evaluate the environmental impact of wood pellet manufacturing facility. As mentioned above, wood pellet manufacturing facility of 20 has produced wood pellets as a raw material sawdust and wood in our country. In this study, in order to feature manufacturing process of wood pellets that resemble almost necessary to analyze evenly size and characteristics of various equipment whether these reasonable, the characteristics of the equipment may be different, the production of 20 places I surveyed the facility one central timber distribution center one large scale most of the equipment.

• Journal of the Korean Wood Science and Technology
• /
• v.21 no.2
• /
• pp.67-72
• /
• 1993

Hot water extractives of sawdust/particle from domestic and foreign wood species, which were composed of pitch pine, Korean pine, larch, Italy poplar, acacia and oak as Korean wood species, Malaysian oil palm and German spruce were quantitatively analyzed with thin layer chromatography. Sugar components of saccharose, galactose, glucose, fructose and arabinose were contained in these wood species. It was assumed that arabinose and glucose are major inhibitory components against cement hardening in larch and oil palm, respectively, since both species contain a large amount of each sugar. In contrast, fructose might not influence so badly on a cement hardening, when considering that fructose was contained much in Italy poplar with a good cement hardening character. Galactose was a minor component.

• Journal of Korea Foresty Energy
• /
• v.23 no.2
• /
• pp.21-28
• /
• 2004

Three different strains of Lentinula edodes, Sanlim 5-Ho, Sanlim 6-Ho and Nongki 3-Ho, were cultured in the sawdust media of Mongolian oak(Quercu mongolica Fisch) for 90 days under dark and light conditions(each 30 days) and fruiting period(30 days). Weight loss of sawdust media was determined after fungal cultures and the contents of ergosterol in fungal mycelia were quantified by HPLC analysis followed by solvent extraction. Compared with the two other fungal strains$(8\%)$, weight loss of Sanlim 5-Ho was slightly lowered to $7\%$. The level of ergosterol content, a parameter for fungal growth, was continuously enhanced in Sanlim 5-Ho for dark and light incubation periods. However, Sanlim 6-Ho and Nongki 3-Ho recorded the maximized fungal growth under light condition. In fruiting periods the ergosterol contents were lowered in the three strains. Intra- and extracellular enzymes during cultural and fruiting periods were also characterized. The activity of Mn-peroxidase and laccase, which are characteristics enzymes for white rot fungi as lignin degrading enzymes, were determined as a high level overall the periods. As cellulose degrading indicators, the activity of CMCase, avicelase, xylanase and glucanase were detectable in initial incubation period.

• Journal of the Korean Wood Science and Technology
• /
• v.39 no.1
• /
• pp.68-74
• /
• 2011

Cauliflower mushroom ($Sparassis$ $crispa$) is being cultivated as a functional mushroom since the mushroom contains larger amount of ${\beta}$-glucan than other edible or medicinal mushrooms. In this study, as a fundamental study for the cultivation process of cauliflower mushroom, we assayed the mycelial growth and the productivity of the mushroom cultivated on the sawdust-based medium made of larch ($Larix$ $kaempferi$) by 4 kinds of medium densities and 6 kinds of particle sizes. Low densities of sawdust-based media (0.68~0.72 g/$cm^3$) showed high variations in mycelial growth at early stage on sawdust-based medium. The coefficient of variance for the mycelial growth decreased from higher than 40% at the 3rd week to lower than 10% at the 7th week. High density of sawdust-based medium (0.80 g/$cm^3$) showed relatively lower variation in the mycelial growth at early stage with less than 30% of coefficient of variance, the high density of sawdust-based medium was thought to be quite stable compared to the lower densities of sawdust-based medium. From the viewpoint of mushroom productivity especially for the goods (excluding bottom of fruiting body), 0.76 g/$cm^3$ was better than any other densities; the return rates of fruiting body from each medium were 12.2, 13.6, 13.1, and 12.0% for 0.80, 0.76, 0.72, and 0.68 g/$cm^3$, respectively. By the way, it took about 40 days for harvesting from primordium formation with the sawdust-based medium excluded the particles less than 1 mm, while it took about 70 days with the medium including the particles less than 1 mm. The yield from the sawdust-based medium with the particles less than 1 mm was also quite less than any other sawdust-based medium especially for the goods. Therefore, we recommend that the sawdust-based medium with larch for the cultivation of cauliflower mushroom be prepared as 0.76 g/$cm^3$ in medium density with excluding the particles less than 1 mm.

• Journal of the Korean Wood Science and Technology
• /
• v.22 no.3
• /
• pp.32-38
• /
• 1994

The methods in wood processing are so limited at present that a scope of its utilization is restricted. This often makes wood itself less valuable as a material comparing with other materials, that is, plastics, metals, and glass. Such differences are due to a lack of plasticity in wood, i.e. it cannot be melted, dissolved, or softened sufficiently for molding. However, once plastic properties are added to wood, it becomes more useful material. This further broadens the method in wood processing to a variety of fields. In this way, wooden material which is limited in use can be modified into a high quality product with additional value. Furthermore, utilization of wastes from wood, for example, would be made viable. In this study, thermoplasticization was carried out by benzylation of wood(sawdust). Various factors those affect the reaction were tested to produce benzylated wood with different degrees of substitution. Reaction temperature and time were the quite important factors. Optimum reaction temperature was 110$^{\circ}C$, and weight percent gains(WPG) of final products increased gradually with the increase of reaction time. The pretreatment (or preswelling) of wood with alkaline solution had a critical effect on benzylation. and the concentration of alkaline solution should be above 30% to obtain high weight percent gain. The thermal flow temperature of the benzylated wood decreased with the increase in weight percent gain, that of 80% weight percent gain is about 200$^{\circ}C$.

• Journal of the Korean Wood Science and Technology
• /
• v.14 no.2
• /
• pp.21-28
• /
• 1986

A quartz type gasification reactor was designed and used for pyrolysis and gasification of sawdust, ricestraw and ricehusk. The initial reaction temperature was 350$^{\circ}C$, and up to 550$^{\circ}C$ to complete pyrolysis and gasification reaction. In order to examine the effect of catalyst on reaction temperature, $K_2CO_3$ and $Na_2CO_3$ as catalyst were also used. The product gas mixtures are identified to be CO, $CO_2$, $CH_4$ and $CH_3CHO$ etc. by Gas Chromatography and Mass Spectrometer. The highest gas volume of the gasified sawdust at 550$^{\circ}C$ amounts to 1800ml/g of sawdust, even though the yield and composition of this product gas are depending on the reaction temperature of the reactor and catalyst used.

• The Korean Journal of Mycology
• /
• v.43 no.2
• /
• pp.104-111
• /
• 2015

In this study, a new strain of Lentinula edodes (Shiitake) Poongnyunko was bred from dikaryotic KFRI 490 and monokaryotic KFRI 536 by Di-mon crossing method. In this study, the productivity was conducted through bed-log and sawdust substrate cultivation. The Poongnyunko showed significant intensive production from summer to autumn. Optimum temperatures of fruit-body formation were $17{\sim}24^{\circ}C$. The total amount of fruit-body production during 4 years by bed-log cultivation was $22kg/m^3$, and total yield of fruit-body until the 3rd flush was 648 g/ 2 kg. In case of sawdust substrate cultivation, the mycelial incubation period was 110~130 days. The suitable temperature and relative humidity were $18{\pm}1^{\circ}C$ and $90{\pm}5%$ respectively.

• Journal of the Korean Wood Science and Technology
• /
• v.30 no.1
• /
• pp.72-78
• /
• 2002

Cultivation of Pholiota adiposa on sawdust media and its mixed substrates with various agricultural by-products was attempted. The composition of each substrates were compared from the viewpoint of cultivation possibilities with the production of Pholiota adiposa. Populus deltoides showed the best production of the mushroom with 795 g, followed by Robinia pseudo-acacia and Quercus acutissima. The mixed sawdust media with 70% of Robinia pseudo-acacia and 30% of Populus deltoides showed the best production of the mushroom with 265 g followed by the mixture of Robinia pseudo-acacia and Populus deltoides with 50% each with 228 g, while the addition of Quercus acutissima showed the negative effect for the production of Pholiota adiposa. Thus, Robinia pseudo-acacia was considered to be an effective amendment for the production of the mushroom. In addition, various kinds of agricultural by-products showed additive effect for the production of the mushroom, too. Therefore, we could concluded that the sawdust of Robinia pseudo-acacia and agricultural by-products can be used to cultivate Pholiota adiposa.