• Journal of the Korean Wood Science and Technology
• /
• v.21 no.2
• /
• pp.49-56
• /
• 1993

This study was performed to investigate the pollution-free Korean traditional papermaking characteristics from paper mulberry by sulfomethylation pulping. Bast fibers were pulped by sulfomethylated cooking liquor, and by alkali and alkali-peroxide processes for the comparison. Sulfomethylated pulping resulted in the superior pulp with high yield and better quality compared to those of alkali and alkali-peroxide pulps. Since the pulp was so bright, there was almost no need additional bleaching. Pollutant loads of sulfomethylated pulping effluent were very low in terms of pH, turbidity and color compared to those of alkali. Pollution-free effluents was accomplished by simple filtering treatment with pine bark, charred rice hull and sawdust compost. Pine bark was the most effective in reduction rate of pollutants.

• Journal of the Korean Wood Science and Technology
• /
• v.35 no.4
• /
• pp.9-13
• /
• 2007

Using sawdust boards made of pine by differing the percentage of resin impregnation, wood-ceramics were manufactured by carbonizing temperature at $650^{\circ}C$. Their electrical properties and surface temperature were measured by sending an electric current. As electrical resistance of woodceramic was lower, its surface temperature, even in a low voltage, became higher. It seemed to be necessary to applying higher voltage to the woodceramic to raise the surface temperature by target temperature $70^{\circ}C$ or more in this study, according as resistance increased. When the voltage increased, woodceramics showed higher level all in electric current, electric power and surface temperature. Arrival time, electric current and electric power increased with increase of target temperature under constant voltage.

• The Korean Journal of Mycology
• /
• v.23 no.2 s.73
• /
• pp.105-113
• /
• 1995

The mycelia of Lepista nuda were isolated from the different basidiocarps, collected from the forests of Robinia pseudo-acaciae and mixed forests of R. pseudo-acaciae and Quercus serrata. On the different woods, the growths of mycelia collected were compared with those transferred from Applied Mycology Division, RDA. Also, the measurements of dry weight loss, as growth of mycelia, were correlated to the productions of carbon dioxide on the different wood substrates. The growth of mycelia was observed to be best on the woods of R. pseudo-acaciae; followed by the growth on the woods of Morus alba. The growth rate of mycelia appeared to be various, depending on the different kinds of wood substrates. The soild-cultures of the mycelia on the sawdust of the R. pseudo-acaciae woods and the grains of sorghum and corn were conducted, but the basidiocarps were not obtained from these. Therefore, this mycelium collected was believed to be important as new mushroom utilizing the different woods resources instead of Q. serrata.

• New & Renewable Energy
• /
• v.10 no.2
• /
• pp.12-18
• /
• 2014

The objective of this work is to produce solid biofuel from sawdust using the HTC (Hydrothermal carbonization) process. The HTC process of feedstock involves the raw material coming into contact with high temperature and pressurized water. The HTC process could produce gaseous, liquefied and solid products, but this study focused on solid product only as an alternative to coal. In this study, sawdust used for a feedstock and its moisture content was under 5%. Water was added with the feedstock to raise moisture content to 80% and also used catalysts. The HTC process was performed at temperature range from 200 to $270^{\circ}C$ and reaction time was 15 to 120 min. Rising temperature resulted in increasing the higher heating value (HHV) of HTC product. In case of adding catalyst, HHV of solid biofuel was higher and reaction occurred at lower temperature and pressure. Also, HTC solid product had been characterized and found to be hydrophobic, increased HHV (over 40%), and pelletized easily compared to raw material.

• Journal of Korean Society of Forest Science
• /
• v.98 no.1
• /
• pp.49-54
• /
• 2009

This study aims to compare the profitability of using small diameter logs of Quercus species in terms of net profit (ratio), net income (ratio). The small logs of Quercus species could be used for the bed logs for shiitake mushroom and Phellinus linteus, sawdust, charcoal, and wood chip. The data of cost and revenue are collected by a face-to-face survey method from the associated factories. Our results show that the profitability for Phellinus linteus production is highest because its price has been formed high due to low market competition mainly resulted from capital service cost and production technique requirement. The next is followed by Shiitake mushroom, sawdust, wood chip, and charcoal. The study also reveals that profitability for long returning periods of investment is higher than that of short returning periods.

• Journal of the Korean Wood Science and Technology
• /
• v.27 no.2
• /
• pp.62-69
• /
• 1999

With increased utilization of chemical fertilizer, soil fertility is getting serious problem. As a result, using organic soil conditioner (woody wastes or sawdust compost) would be only solution to recover soil vitality. In this study, manufacturing and characteristics of organic soil conditioner from Shiitake bedlogs (woody wastes) were studied. Also, to investigate the effect of continuous application of this bedlog compost on growth of plants, growth tests for radish and tree seedlings were done. The results are as follows ; Analytical results of decayed and fresh wood materials showed almost same as its wood components. The mixing ratio of raw materials with the other filling materials is essential for the manufacturing as well as good quality of its compost during composting process. In this experiment, mixing 12kg of urea, 25kg of lime, 40kg of chicken shit, and small amount of fermentation aids corresponding to I ton of sawdust resulted in good composts. Their moisture contents were adjusted to about 55%. Temperature of pile, in composting process, rose after I week and kept about above $60^{\circ}C$ for certain period. They were turned two times, 30th and 59th day, respectively, after piling. This bedlog compost contained 81.7% of high organic matter, 1.4% of a little nitrogen, 6.75 of pH and 25 - 30 of C/N ratio. There were no harmful effect on germination and growth of plants, such as radish and softwood and hardwood seedlings. Concerned to the effect of bedlog compost on soil temperature, the compost did not affect plant growth by changing soil temperature abruptly, but compensated the soil temperature such as a little increasing on the early morning, a little decreasing on the mid-day or afternoon (pm 2:00), and increasing on the early evening (pm 6:00).

• Journal of the Korean Wood Science and Technology
• /
• v.49 no.5
• /
• pp.514-534
• /
• 2021

To estimate the territorial size of Reticulitermes speratus, a species of subterranean termites that damages wooden structures in Korea, appropriate dye markers were selected and the diffusion tendency was analyzed. According to the results of the sensitivity assessment using sawdust diet, increase in dye concentration reduced the amount of feed consumption but the dyeing becomes more intense. Except for the Neutral Red 0.5% group, all other concentration groups, including the control group, showed a survival rate of > 85% until week 4. For both, Nile Blue A and Neutral Red dye markers, all concentration conditions > 0.2%, except for the 0.1% concentration, were maintained for 11 weeks, and no sign of transfer effect was found except when the termites were fed with the dye markers. Therefore, it appears that 0.2% of Nile Blue A and Neutral Red is the optimal concentration for monitoring the R. speratus colonies. Additionally, we prepared an indoor 40 m long foraging arena consisting of a colony of 25,000 termites and released individuals stained with 0.2% of Nile Blue A and Neutral Red at both ends to assess the diffusion trends over time. The results showed that it took approximately 7 days for each dyed individual to gradually cover the 40 m distance and mix with each other. These findings reveal that when mark-release-recapture monitoring is conducted on the R. speratus colonies damaging wooden structures, the extent of the colony's activity area could be measured and different colonies could be distinguished from each other.

• Journal of the Korean Wood Science and Technology
• /
• v.47 no.4
• /
• pp.509-518
• /
• 2019

This study analyzed the effect of organic solvent extractives on the classification of wood species via near-infrared spectroscopy (NIR). In our previous research, five species of Korean softwood were classified into three groups (i.e., Cryptomeria japonica (cedar)/Chamaecyparis obtuse (cypress), Pinus densiflora (red pine)/Pinus koraiensis (Korean pine), and Larix kaempferi (Larch)) using an NIR-based principal component analysis method. Similar tendencies of extractive distribution were observed among the three groups in that study. Therefore, in this study, we qualitatively analyzed extractives extracted by an organic solvent and analyzed the NIR spectra in terms of the extractives' chemical structure and band assignment to determine their effect in more detail. Cedar/cypress showed a similar NIR spectra patterns by removing the extractives at 1695, 1724, and 2291 nm. D-pinitol, which was detected in cedar, contributed to that wavelength. Red pine/Korean pine showed spectra changes at 1616, 1695, 1681, 1705, 1724, 1731, 1765, 1780, and 2300 nm. Diterpenoids and fatty acid, which have a carboxylic group and an aliphatic double bond, contributed to that wavelength. Larch showed a catechin peak in gas chromatography and mass spectroscopy analysis, but it exhibited very small NIR spectra changes. The aromatic bond in larch seemed to have low sensitivity because of the 1st overtone of the O-H bond of the sawdust cellulose. The three groups sorted via NIR spectroscopy in the previous research showed quite different compositions of extractives, in accordance with the NIR band assignment. Thus, organic solvent extractives are expected to affect the classification of wood species using NIR spectroscopy.

• Journal of Korea Foresty Energy
• /
• v.21 no.2
• /
• pp.62-68
• /
• 2002

Adiabatic property of plywood wall panel was examined to evaluate their thermal conductivities. The amount of heat loss was investigated through overall heat transmission experiment. Styroform and grass wool showed less heat loss. However, yellowsoil board and laminated lumber showed high volume specific heat capacity. When the changes of indoor and outdoor temperature were checked in model house, wall manufactured with styroform and grass wool was affected easily by the changes of outdoor temperature. Yellowsoil, the mixed board of yellowsoil and sawdust, and laminated lumber, which have high volume specific heat capacity, were not affected much. The rates of overall heat transmission were much better in styroform and grasswool, but the adiabatic properties were much higher in yellowsoil board and the mixed board of yellowsoil and sawdust. The results showed that the insulating material can be developed using yellowsoil and wood, which are nature friendly materials.

• Journal of Mushroom
• /
• v.15 no.4
• /
• pp.164-167
• /
• 2017

Biological efficiency (BE), the ratio of fresh mushrooms harvested per dry substrate weight, expressed as the percentage of Lentinula edodes, also known as shiitake, was determined using the 'Sanjo 701' strain stored in the Department of Mushroom at the Korea National College of Agriculture and Fisheries. The mycelia were grown in glass columns with varying levels of moisture content and varying mixing periods of 0.5, 1, 2, and 3 hours. The substrate was sterilized using a steam pressure autoclave sterilizer at normal and high pressure to avoid contamination. The results showed that mycelial growth (126 mm/15 days) was optimized at 55% moisture content. The best mycelial growth of 117 mm/15 days was obtained with 2 hours of mixing time. Normal pressure sterilization yielded better results with mycelial growth of 96 mm/15 days at $100^{\circ}C$ compared to 88 mm /15 days with sterilization at $121^{\circ}C$. Mycelial density was higher, i.e. 3(+++), with normal pressure sterilization compared to 2(++) with high pressure sterilization. Furthermore, sawdust mixed with 5% woodchips increased the substrate porosity and yielded higher mycelial growth. Thus, we demonstrated that the optimum harvest or potential increased yield of shiitake can be obtained by modulating moisture content, mixing time, and substrate porosity.