• Journal of the Korean Wood Science and Technology
• /
• 제29권3호
• /
• pp.68-72
• /
• 2001

In order to effectively use the waste wood, two types of woodceramics chip tile were made from woodceramics chip, gravel, zeolite and additions. The woodceramics chip was made from branch of apple tree (Malus pumila Mill.) Snow melting property, bending strength and compressive strength of woodceramics chip tile were tested according to the mixing rate of woodceramics chip. Snow melting properties of woodceramics chip tile increased after additions treatment but mechanical properties were reduced significantly after additions treatment. The results indicate that the additions are effective for snow melting property but negative effect on mechanical properties.

• 한국가구학회지
• /
• 제24권4호
• /
• pp.379-388
• /
• 2013

In this study, the effect of various glass fiber (GF) contents in a shell layer and shell thickness changes on the flexural property of coextruded wood plastic composites (WPCs) in combination with three core systems (weak, moderate, and strong) was investigated. GF behaved as an effective reinforcement for the whole coextruded WPCs and GF alignments in the shell layer played an important role in determining the flexural property of the coextruded WPCs. At a given shell thickness, the flexural property of the whole coextruded WPCs was improved with the increase of GF content in shell. For core quality, when the core is weak, increase of GF content in shell led to improved flexural property of the whole composites and increase of shell thickness helped it. On the other hand, when the core is strong, the flexural property of the whole composites showed reduced features at low GF content in shell and increase of shell thickness aggravated it. This approach provides a method for optimizing performance of the coextruded WPCs with various combinations of core-shell structure and properties.

• Journal of the Korean Wood Science and Technology
• /
• 제19권4호
• /
• pp.52-61
• /
• 1991

In this paper, the difference of the property of absorption and desorption for five species in semi-steady state are studied. The species used are listed in Table 1 and the dimension of specimen was $8\times8{\times}T$(Tangential direction)cm and tested in various conditions. A change of average moisture content with time were measured in each cycles. The results obtained are summarized as follows. When the relative humidity in air was maximum or minimum, the distribution of moisture In wood of all specimens were illustrated by exponential curves of decrease or increased from lace 10 center of wood. From the consideration of coefficient of decrease(C), the amount of moisture change of spruce was larger than the others. The pheonomenon was considered no relation to the specific gravity in air dry, but the wood structures. The velocity of the absorption and desorption for species decreased in the order spruce(Picea sitchensis) neodobam(Fagus crenata), solsong(Tsuga heterophylla), meranti(Shorea sp.) and kaesoo(Cercidiphyllum japoicum). In case of constant temperature and water vapor pressure is changed. the amount of absorbed moisture was larger than that of constant water vapor pressure and temperature vaned. In this fact, it is considered that the property of sorption of wood is strongly influenced by vapor pressure gradient than temperature gradient.

• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2014년도 춘계 학술논문 발표대회
• /
• pp.236-237
• /
• 2014

Recently, it changes to the frame construction in the wall type structure for the life span improvement of the apartment house of our country. The execution of the light panel increased while the execution of the frame construction increased. Therefore, the density and absorption ratio of the magnesium oxide matrix according to the wood flour amount of addition ratio property try to be analyze for the lightweight of the surface material of the light panel. The test result, the density has been declined as the addition ratio increase of the wood flour. In the case of the water absorption ratio, water absorption ratio has been increased as addition ratio increase of wood flour. However, wood flour addition ratio 15% determined the most appropriate when considering the density and water absorption ratio.

• Journal of the Korean Wood Science and Technology
• /
• 제36권1호
• /
• pp.30-35
• /
• 2008

동해안 지역에서 산불로 고사된 소나무의 5년에 걸친 경시적 재질 변화를 역학성능을 중심으로 조사하였다. 고사에 따른 재질열화로 가장 크게 영향 받는 역학성능은 충격 휨 흡수에너지였다. 따라서 고사 초기의 재질변화를 예측하는 지표로 활용이 가능할 것으로 밝혀졌다. 고사 경과에 따라 변재의 재질열화가 심재에 비해 두드러지게 진행되었다. 열화의 정도는 충격 휨 흡수에너지가 가장 컸으며 압축강도가 가장 작았다. 고사 이후의 외관 변화와 역학성능의 열화진행 정도로 볼 때 산불피해 소나무의 유효한 활용을 위한 적정 벌채 시기는 산불발생 1년 이내가 바람직한 것으로 밝혀졌다.

• Journal of the Korean Wood Science and Technology
• /
• 제43권6호
• /
• pp.792-797
• /
• 2015

진공가압 수지함침 처리에 의한 목재의 휨강도, 경도 및 내마모성 향상을 위하여 침엽수 3수종에 수용성 멜라민 수지를 수지농도와 처리시간별로 진공가압 처리한 후 수지함침 열압축목재(compreg)를 제조한 다음 물성을 검토하였다. 또한 같은 수종에 수용성 난연제를 도포처리하는 방법과 진공가압 후 열압처리 방법으로 제조한 다음 난연성 향상정도를 측정하였다. 수지의 농도가 높을수록 휨강도 및 브리넬 경도는 증가하였고 내마모성은 향상되었으나, 처리시간과는 일정한 경향이 없었다. 난연성은 도포시험편 보다 진공가압처리 시험편이 총 방출열량이 감소하여 진공가압처리에 의한 난연성 개선 방법이 효과가 있었다.

• Journal of the Korean Wood Science and Technology
• /
• 제30권2호
• /
• pp.87-94
• /
• 2002

본 연구는 고주파 가열에 의한 산벚나무, 소태나무, 서어나무, 굴참나무, 박달나무, 고로쇠나무, 피나무, 소나무, 리기다 소나무, 참오동나무의 휨가공성을 평가해 보기 위하여 실시하였다. 본 연구에서 휨가공을 위한 곡율반경은 휨틀의 곡율반경에 의해 4 cm, 6 cm, 10 cm으로 구분하고, 대철의 두께는 0.6 mm와 0.8 mm로 구분하였다. 본 연구결과 소태나무, 서어나무, 박달나무, 고로쇠나무는 모든 곡율반경에서 100% 성공률을 나타내었다. 산벚나무와 굴참나무의 경우 58%와 83%의 성공률을 각각 나타내었다. 피나무와 오동나무의 경우 총 29%와 8%로 매우 불량하게 나타났고, 곡율반경 4 cm에서는 모두 실패로 나타났다. 침엽수재인 소나무와 리기다 소나무는 각각 44%와 56%의 성공률을 나타내었다. 대철의 두께는 휨가공성의 쉽고 어려움보다는 건조시 건조속도에 더 많은 영향을 주는 것으로 나타났다. 건조과정에서 대철두께가 얇을수록 휨가공부재의 건조 속도가 빠른 경향을 나타내었다.

• Journal of the Korean Wood Science and Technology
• /
• 제39권2호
• /
• pp.172-178
• /
• 2011

Three different finger-jointed lumbers which have different geometric features and adhesives were manufactured and studied in this study. Larch and pitch pine lumbers with and without preservative treatment were used. Bending MOE was measured as the preliminary investigation for grouping the specimen. After the finger, bending MOE of two wood species without preservative treatment shows over 97% property of the control group. The tensile modulus also shows almost same property after the finger joint. And it is found out that the preservative treatment induce little effect on bending and tensile MOE. Based on this result, high performance of examined finger-jointed lumber can be found out. However, tensile strength decreased around 20% which would be induced by the crack along the root of the finger which is formed near the edge during manufacturing stage. And finger-jointed lumber with preservative treatment even shows higher decrement of the tensile strength with higher wooden part failure mode.

• Journal of the Korean Wood Science and Technology
• /
• 제27권3호
• /
• pp.7-16
• /
• 1999

본 연구는 밤나무와 오동나무에 대해 살리게닌 처리, 가열처리 및 무처리재의 세포조직, 평형함수율, 흡습성과 음향 성을 비교할 목적으로 수행하였는데, 이를 수종의 무처리재와 열처리재의 세포조직은 거의 동일하였지만 살리게닌 처리재의 세포벽은 무처리재의 것보다 두꺼워졌다. 평형함수율은 무처리재, 가열처리재 및 살리게닌 처리재 순으로 낮게 나타났으며, 살리게닌 흡수율(吸收率)이 클수록 평형함수율은 감소되었고 흡습곡선은 포물선적으로 증가되었다. 살리게닌 처리재의 음향성은 현저하게 개선되었으며, 그 다음 가열처리재 순으로 나타났다. 살리게닌 흡수율(吸收率)후 수준에 따른 음향성은 밤나무의 경우 흡수율(吸收率) 20%와 30%, 그리고 오동나무의 경우 흡수율(吸收率) 80% 처리재의 개량효과가 가장 컸었다.

• Journal of the Korean Wood Science and Technology
• /
• 제25권4호
• /
• pp.29-38
• /
• 1997

The effect and control of wood property of reconstituted composite panels for improved board properties by wood-waste materials and development of combination method for heterogeneous materials have been of interest to the wood science researchers. The purpose of this study is to consider the properties in relation to hot pressing conditions and to develope the optimum hot pressing condition with waste wood and waste tire for the manufacturing of composite boards. The study of composite boards for recycling of wood and waste tire is nothing up to the present. Physical and mechanical properties such as specific gravity, moisture content, swelling coefficient, modulus of rupture and modulus of elasticity in bending test were studied. The condition of 3-stage press time for the lowest moisture content of composite board was $4{\rightarrow}3{\rightarrow}3$ minutes. Specific gravity of composite panels was affected mainly by the amount of rubber chip. Because of the low rigidity and high elasticity in rubber chip, it is considered the composite panel was adequate material in the place of compression load, but not bending load. Therefore, it was concluded that a use of rubber-based wood composite panel is proper to the interior materials such as floor a room than exterior materials. From the test results, the most optimum hot pressing conditions were $4{\rightarrow}3{\rightarrow}3$ minutes for 3-stage press time and $45{\rightarrow}20{\rightarrow}5kg/cm^2$ for 3-stage press pressure. The rubber-based wood composite panel was very excellent in elasticity by combination of rubber chip in comparison with existing other wood-based materials. Therefore, it was considered that rubber-based wood composites can be applicable to every interior materials such as floor a room and will be expected to effective reuse and recycle of waste tires and wood-waste materials, and will be contribute to protection of environment pollution in earth.