• Journal of the Korean Wood Science and Technology
• /
• v.44 no.2
• /
• pp.166-171
• /
• 2016

Size reduction is one of the major pre-processing operations in using biomass as a source of energy or raw materials for forest products industry. The grinding characteristics of dried yellow poplar wood chips were investigated using laboratory knife mill with three different screen aperture diameters to provide the basic information for the optimizing of size reduction processes in biomass industry. Average specific energy consumptions were 0.157, 0.137, and 0.093 Wh/g for the screen aperture diameters of 5.0, 7.5, and 9.0 mm, respectively. According to the results of size distribution analysis of ground particles, the sizes of the most of ground particles were much smaller than the aperture diameters of the screens installed on knife mill used in this study.

• Proceedings of the Korea Technical Association of the Pulp and Paper Industry Conference
• /
• 2011.04a
• /
• pp.131-138
• /
• 2011

Currently, many forest residues have been generated by the National Forest Management Operation. Unfortunately, most of the forest residues are supposed to be used as raw materials for burning fuels like wood pellets. Even though the forest biomass must be effectively used for making high value-added products, they may be subject to disposable raw materials for wood pellets. Wood pellets are regarded as burning fuels with less contribution to the decrease in carbon gas emission, compared to raw materials for kraft pulps. In this study, we studied whether or not forest biomass mixed with various ages and, species could be used as raw materials for kraft pulps.

• Proceedings of the Korea Technical Association of the Pulp and Paper Industry Conference
• /
• 2011.10a
• /
• pp.43-47
• /
• 2011

In woody waste separated from municipal solid waste, medium density fiberboard was major contributors with particleboard, paper, plywood and log, with different composition based on collected period. In chemical compositional analysis of woody waste, it was similar to softwood based on carbohydrate composition analysis. Based on the carbohydrate composition, saccharified solution from MWW could be good resource for biorefinery.

• Journal of the Korea Furniture Society
• /
• v.28 no.1
• /
• pp.36-46
• /
• 2017

Recently, the demand for marine leisure industry is rapidly increasing due to the five-day work week and the per capita income approaching US $ 30,000. In particular, the Republic of Korea is surrounded by the sea on three sides and is composed of 3,150 islands and coastline. As shipbuilding infrastructure is abundant and the government is expected to actively support policies as a new growth engine, leisure boat furniture industry is expected to grow rapidly along with leisure boat manufacturing. Therefore, in this paper, after understanding the leisure boat (yacht) and analyzing the requirements of yacht furniture, we proposed a beautiful yacht furniture design that is lightweight, durable and safe using a 120-foot super yacht that can best show the characteristics of yacht furniture using wood bending technology and color variation of woods.

• Proceedings of the Korea Technical Association of the Pulp and Paper Industry Conference
• /
• 2006.06b
• /
• pp.349-352
• /
• 2006

The conventional pulping processes in Iran were reviewed in this paper. On account of forest resources restriction, a considerable extent of non-harvestable hardwood forests, the possibility of accessable non-wood resources and Poplar fast-growing species for using in pulp and paper industry was investigate. The cultivated area and abundance of each mentioned raw material (Wheat Straw, Sugarcane Bagasse, Poplars) were specified and the quality of their produced papers were compared in strength and opacity properties. Spruce species data was used for experiments comparisons. Regarding to environmental pollutions, low yield, inflexibility in wood and non-wood species resulted from the existent conventional processes of paper manufacturing, APMP is recommended due to high quality paper, desirable opacity properties, high yield and also the usage for all the raw materials.

• Journal of the Korean Wood Science and Technology
• /
• v.3 no.1
• /
• pp.20-23
• /
• 1975

• Journal of the Korean Wood Science and Technology
• /
• v.43 no.5
• /
• pp.641-651
• /
• 2015

The aim of this study was to estimate the service life of alkaline copper quaternary (ACQ)-treated wood. The service life of preservative-treated wood was estimated by comparing a residual quantity of ACQ in wood with toxic threshold to fungi. Indoor and outdoor leaching tests were carried out in order to predict residual ACQ quantity within wood. As a result, the leaching ratio of ACQ from treated wood above ground via precipitation was 18.1% for 50 years. When the H4 treated wood, which is traditionally used in contact with the ground and fresh water, is used above-ground, the leaching ratio of ACQ for 50 years is 18.1% and the residual quantity of ACQ is $4.2kg/m^3$, which is higher than the toxic threshold of ACQ. Thus, the H4 treated wood used above-ground will be resistant to biodeterioration for at least 50 years.

• Journal of the Korean Wood Science and Technology
• /
• v.43 no.2
• /
• pp.265-273
• /
• 2015

In general, when wood products are used outdoors for a certain period of time the surface color of wood changes due to light, water, heat and so on. This color change can be considered importantly for the product's market value. In this study, the color change of ACQ (Alkaline Copper Quaternary) and CBHDO (CuO $H_3BO_3$ N-cyclohexyldiazenium-anion) treated wood and untreated wood was investigated during 2-year weathering test. From this experimental study, it was found that the colors of the treated wood changed more reddish and yellowish from green. Meanwhile, the untreated wood turned to grey color rapidly. Also, the color of the treated wood in short-term exposure changed closer to the inherent color of the fresh natural wood than that of the untreated woods.

• Journal of Korea Technical Association of The Pulp and Paper Industry
• /
• v.47 no.6
• /
• pp.73-80
• /
• 2015

Corn stalk is the lignocellulosic biomass, which remain as leftover after harvesting. To use the corn stalk as raw material for paper industry, soda pulping was applied. In chemical compositional analysis, extractive contents of corn stalk (45.1%) was higher than hardwood. With corn stalk pith, soda pulp yield was 25.3% at 10.6 Kappa number, but 39.5% yield with 14.8 Kappa number for corn stalk rind. Higher extractives content in pith is one of the reason for lower pulp yield than rind. Pith pulp fibers had higher fines content than rind pulp. Pith parenchyma cell was removed as fines during pulping or washing process, which caused the lower yield. To use the corn stalks as a raw material for paper making, de-pith process is essential for higher pulp yield and longer pulp length.

• Journal of the Korean Wood Science and Technology
• /
• v.50 no.1
• /
• pp.1-11
• /
• 2022

To evaluate the bearing strength of red pine cross-laminated timber (CLT) with self-tapping screw (STS), which is widely used as a fastener for connection in CLT building, the bearing test was conducted. Accoring to the STS's diameters (8, 10, 12 mm), the bearing test specimens with half hole were manufactured. Bearing strength was compared and reviewed in consideration of the configuration in STS and the loading direction to the grain of red pine. As a result of the bearing test on the STS's diameter, the yield bearing load increases as the larger diameter of the STS in all directions of the red pine. The bearing strength of the thread part (thread + tip) was higher than the shank part (shank + shank cutter). In compared with the directions to the grain of red pine, the bearing strength of the cross section parallel to the loading direction was the highest, and the tangent section was the lowest bearing strength. The average bearing strength of the loading direction in parallel to the grain was 23.43 MPa, which was about 45% higher than the average 16.16 MPa in perpendicular to the grain. The predicted bearing strength calculated by Eurocode (EN) and Korean Building Code (KBC)'s equation was lower than the experimental value. It is nessesary to propose the new equations of bearing strength reflected the configuration information of STS.