• Journal of the Korean Wood Science and Technology
• /
• v.51 no.5
• /
• pp.419-430
• /
• 2023

In this study, the floor impact sound insulation performance of Korean domestic Cross-Laminated Timber (CLT) slabs was evaluated according to their joint types, species and thicknesses in laboratory experiments. The sound insulation performance of the CLT has not been investigated before, thus, this study was conducted to quantify basic data on floor impact sound insulation performance of CLT slabs. 5-ply and 150 mm thick CLT panels made of 2 species, Larix kaempferi and Pinus densiflora, were used for the study. The CLT panels were assembled by 3 types of inter-panel joints to form floor slabs: spline, butt and half-lap. And the 150 mm thick Larix CLT slabs were stacked to the thicknesses of 300 mm and 450 mm. The heavy-weight floor impact sound insulation performance of the 150 mm CLT slabs were evaluated to be 70 dB for the Larix slabs and 71.6 dB for the Pinus slabs, and the light-weight floor impact sound insulation performance, 78.3 dB and 79.6 dB, respectively. No significant difference in the sound insulation performance was found between the slabs of the 2 species or among the 3 types of joints. The reduction of 1 dB in the heavy-weight floor impact sound and 1.6 dB in the light-weight floor impact sound per 30 mm increase in thickness were confirmed through the experiments. This study can be viewed as the basic research for the evaluation of floor impact sound insulation performance of CLT.

• Journal of the Korea Furniture Society
• /
• v.21 no.5
• /
• pp.354-366
• /
• 2010

The modern unique woodworking furniture has been made in earnest from 50 years ago. Some oil from nut such as soybean, walnut and perilla, which is usually used in our common life, has been used as finishing material for the unique woodworking furniture. Recently, woodworking studio business among the whole furniture industry has grown gradually and many woodworkers uses various kinds of imported wood finishing oil. Many woodworkers use the imported finishing oil in the old ways instead of understanding the characters of the various kind of oil and It causes some serious problems in furniture finishing process. Therefore, this study aims at taking theoretical approach in wood finishing oil and presenting correct usage in understanding the types and characters of oil. Resultingly the new method of oil finishing for wood is suggested and this suggestion is to guide woodworkers into the right usage of wood finishing oil.

• Fashion & Textile Research Journal
• /
• v.6 no.2
• /
• pp.239-244
• /
• 2004

On the whole the various medium colors were developed by repeat dyeing with different colorants after dyeing with one colorant in case of natural dyeing. In this study, in order to obtain various colors on wool fabrics with Gardenia and Sappan wood colorants, pre-mordanting and combination dyeing were carried out. Gardenia and Sappan wood used as natural colorants for combination dyeing showed good miscibility in dye bath, Metal compounds containing alum, copper and iron were used for pre-mordants. The various medium colors such as yellow-red were obtained according to various metal compounds for pre-mordants and various mixing portion of these natural colorants. The surface reflactance spectra and color characteristics of wool fabrics by mordanting and combination dyeing were investigated.

• Fashion & Textile Research Journal
• /
• v.5 no.1
• /
• pp.82-88
• /
• 2003

This study was carried out to investigate combination dyeing of the cationized cotton with natural colorants extracted from Gardenia and Sappan wood extract using methanol. To improve dyeing properties of cotton with natural dye, cotton fabric was preheated with cationizing agent containing chlorohydrine group in aqueous solution of sodium hydroxide. On the whole the various medium colors were developed by repeat dyeing with different colorants after dyeing with one colorant in case of natural dyeing, In this study, however in order to obtain various colors on cationized cotton fabrics with natural dyes, pre-mordanting and combination dyeing were carried out. The various colors were obtained according to various metal compounds for pre-mordants and various mixing portion of Gardenia and Sappan wood. Metal compounds containing alum, copper and iron were used for pre-mordants.

• Journal of the Korean Wood Science and Technology
• /
• v.28 no.4
• /
• pp.83-93
• /
• 2000

This study was carried out to improve the physico-mechanical properties of board products by applying the technique of high frequency heating, and find out the optimum conditions of high frequency heating, compared with the technique of hot platen heating. The possibility of isocyanate resin application to board production was also considered to solve the problem of free formaldehyde emission from urea resin which is generally used in wood industry. For this study, 30 mm thick MDP (medium density fiberboard) with isocyanate resin were manufactured by the techniques of hot platen heating, high frequency heating and the combination techniques of both heating methods, and compared in several point of views.

• Journal of the Korean Wood Science and Technology
• /
• v.49 no.4
• /
• pp.328-335
• /
• 2021

Considerable differences exist in the characteristics of size reduction and classification because of biomass species. Miscanthus sacchariflorus (M. sacchariflorus) Goedae-Uksae 1 is not used efficiently because of the imperfections of the processing technology for this biomass. Therefore, for the best use of specific biomass, improvement in the feedstock preparation of the biomass for processing, such as pellet manufacturing, is necessary. In this study, a laboratory-scale cone grinder and air classifier were designed and combined to investigate the performance of the combination system for M. sacchariflorus. The average equivalent spherical diameter of particles showed a close relationship with air velocity for air classification. The air velocity range to classify proper particles for pelletization was determined to be 6.0-6.8 m/s. The mass ratios of the collected particles to feed mass for four lengths of chopped M. sacchariflorus were 45.1%:46.1%, 39.1%:46.6%, and 44.1%:52.8% at the first, second, and third steps in simulating the multistep combination system, respectively.

• Fire Science and Engineering
• /
• v.29 no.3
• /
• pp.1-5
• /
• 2015

The productivity and demand of porous material has been increasing by development of industry and increasing income. In particular, the fire caused by using wood flour risks wood processing industry and stock farm. The heat transfer of wood flour is carried into the depth direction by effect of oxidizer around flame, flame sometimes is progressed as smoldering. In the case of progressing as combustion fire, identifying the location of fire is difficult, and it leads to failing fire aid fire fighting. Therefore potential cause is acted as raising additional damage. This paper conducts experiments of downward deep seated fire of natural convection conditions. The samples is New Zealand wood flour that is demanded much in the domestic and oversea market. In this experiment, temperature of deep seated side is measure by changing wood flour density in holder The densities used in experiment are 3%, 5%, 10%, 15%. As a result, the tendency of temperature inside decreases as wood flour density increases. But, in the case of density which is above $0.2140g/cm^3$, the phenomenon, decreasing temperature, is not shown. The result of measurement show that average flame spread speed of wood flour is 0.249 mm/min.

• Journal of the Korean Wood Science and Technology
• /
• v.12 no.1
• /
• pp.11-30
• /
• 1984

This study was executed to offer the basical data needed to the plywood industry as examining on the wood characteristics of veneer species that grow in Korea. According to the aggravation of log import from foreign countries caused by the gradual exhaustion of wood resources in recent years, the study on wood characteristics of veneer species growing in Korea should be carried out preferentially in promotion of the domestic timber utilization and development of it's processing technique for plywood industry. 50 commercial veneer species in this study were selected from 33 genuses, and general macroseopical wood characteristics for them were examined and described by the species. And also keys for the identification based on gross features were briefly prepared and presented by gymnosperm and angiosperm respectively.

• Journal of the Korean Wood Science and Technology
• /
• v.10 no.3
• /
• pp.168-179
• /
• 1982

The first step to utilize the growing resources of Italian poplar (Populus euramericana I-476) for pulp-Woods, its characteristics and adaptabilities to the pulp industry must be investigated completely. The plantation methods are important for its fast growing in stock, and no less important is the cutting age for its utilization as pulpwood. In this paper, the stone groundwood pulping, refiner groundwood pulping and chemi-groundwood pulping characteristics by the age of tree, along with their physical and chemical characterstics were tested, and relationships between the age groups were analyzed to find out the optimum felling age. The results obtained are as follows: 1. The coefficient of pliability was a little higher in the case of younger trees. 2. The water retention value of each pulp was directly proportional to its physical strength, but this tendency was not detected between the age groups of sample woods. 3. Generally, the physical strength of younger wood pulp was lower regardless of the pulping process. But in the case of pretreatment with NaOH, Asphund and CGP pulp from 5 year old sample wood were stronger in physical strengths than those of GP and Asplund pulp with no pretreatment from 10 years old sample wood. 4. The tear factor of Asplund pulp with alkali pretreatment was higher than that of CGP pulp but the breaking length and the burst factor was similar in all processes. Considering the pulp yield and its brightness, CGP process seems to be advantageous. 5. The dissimilarity of physical strength between 7 and 10 years old wood pulp was not very large in all pulping processes but the physical strength of 5 year old wood pulp was very weak. In the of groundwood pulping from Italian poplar woods, 5 year old wood pulp should be mixed with other long fiber pulp for making a good paper.

• Journal of the Korean Wood Science and Technology
• /
• v.25 no.2
• /
• pp.117-126
• /
• 1997

In fast grown softwood, there are very large changes in material properties going outward from the pith to bark such as anatomical, physical and mechanical characteristics. Some of variations in anatomical properties with annual ring were then examined from Pinus koraiensis, Larix leptolepis, and Chamaecyparis obtusa, which are major softwoods of plantation in Korea. The large variations of annual ring width during young age of tree tended to stabilize after 25year through the transitional period in 17~23year. The ring density was 1.5~2.4 in 1~10year period, and 3.5~6.3 in 30~35year period, in which juvenile and mature wood were certainly assumed to be formed, respectively. Variations of tracheid length showed functional relationships with annual rings as logarithm. Demarcation between juvenile wood and mature wood could be 16~19year, which was determined from increase rate of tracheid length of 0.2%. Cell wall thickness increased with increase of annual ring even though large variations were observed as well. Variations of cell wall thickness within species were pronounced in latewood than earlywood. The increase of cell wall thickness from juvenile wood to mature wood was predominant in Larix leptolepis as 2.0times, and least in Chamaecyparis obtusa as 1.1 times. Cell diameters showed trends of increase during young age of 1~15year, and consistent afterward. The variations of cell diameter between radial and tangential direction were greater in latewood, and most pronounced in Chamaecyparis obtusa.