• Culinary science and hospitality research
• /
• v.15 no.4
• /
• pp.9-17
• /
• 2009

The microbiological examinations was conducted for the hygienic evaluation on ten Japanese restaurants during summer season in Gwangju, Korea. Total two hundreds swabbed samples using sponge were collected from the surface of facilities and utensils at restaurants. The number of total microorganism, coliform, E. coli, Staphylococcus, Salmonella, and Listeria were measured. The results demonstrated that most swabbed samples were contaminated with microorganisms and coliforms. The degree of contamination depended on the sample sites. The severely contaminated sites were floor, trench, and working table for the fish and total counts of those samples were over $10^4$ CFU/100 $cm^2$. The coliforms were detected on the floor, trench, and wood cutting board over $10^3$ CFU/100 $cm^2$. Moreover, coliforms was detected on the towel, dish, and working place for fish and vegetables. The E. coli was detected on the floor and trench of several restaurants. The Staphylococcus spp. was detected on the cutting board, towel, floor and trench of several restaurants. The Salmonella spp. and Listeria spp. were not detected all over the samples. From those results showed that sanitation management and disinfection were required on the Japanese restaurants.

• Journal of the Korea Furniture Society
• /
• v.11 no.2
• /
• pp.45-53
• /
• 2000

This study was carried out to determine the suitability of 3 months old bamboo species of Phyllostachys bambusoides S. et Z., Phyllostachys Pubescens Mazel and Phyllostachys nigra var henonis Stapf as raw materials for the manufacture of strandboard. Total of 108 strandboards were made using urea-formaldehyde resin content level of 12% and one percent of liquid wax emulsion. The strandboard consisted of three layers the top and the bottom layer of which were oriented to the same direction and weighted 25% of the strandboard each. The middle core layer weighed 50% of the board and was perpendicular to the outer top and bottom layers. Analysis was performed to determine the effect of strand lengths and Uowing years of 3 months, 2 years and 3 years on strandboard properties. The physical and mechanical properties of bamboo species and boards were measured and compared to the standard requirements of strandboards. The results are as follows; 1. The more the growing years the higher the density of bamboo. Top part of bamboo indicated higher density value than that of bottom part. 2. Bamboo showed higher static bending strength compared to the main wood species. Longer growing years of bamboo generally inclosed the static tending strength out there were no statistical significancies for Phyllostachys bmbusoides S. et Z. and Phyllostachys pubescens Mazel. 3. Strand length indicated no difference on density and moisture content of strandboard. 5 cm of strand length gave the best static bending strength and internal bonding strength. Bamboo strandboard exhibited lesser extents of thickness swelling than that of CSA standard. 4. 3 months old bamboo gave higher static bending strength of strandboard than those of 2 years and 3 years old bamboo. In case of Phyllostachys nigra var henonis Stapf, 3 months old bamboo indicated higher internal bonding strength than those of 2 years and 3years old bamboo. but in Phyllostachys bambusoides S. et Z., Phyllostachys pubescens Mazel, there were no difference among growing years. Growing years showed no different physical properties of bamboo strandboard.

• Journal of the Korea Furniture Society
• /
• v.28 no.3
• /
• pp.207-223
• /
• 2017

Jeonju-Jang is the wood furniture that was made in Chonbuk Jeonju province during the Joseon Dynasty, and was used by middle-upper social classes. It has value as a local cultural heritage because it has unique characteristics in terms of the shape of the furniture, the metal ornament and various functions are integrated in accordance with user's requirements. Therefore, the purpose of this study is to define the structural characteristics of the Jeonju-Jang through case studies of 16 existing artifacts in order to preserve and inherit the value as local cultural resources. The conclusion is as follows. First, Jeonju-Jang in the late period of Joseon Dynasty that is made up of one board to the bottom with the binding of the board. and the front wall, the Juibyuckkan and the Meoruemkan are omitted or made small, so the structure of the surface is simple. There are three or four drawers under the Cheon pan(top plate). There are drawers and shelf inside the hinged door. In the case of a two-layer type, there is a Gaegumeong type door which has half of one side hinged. Second, Jeonju-Jang of the Japanese Ruling Era had a Juibyuckkan by frame binding and an increase in the number of Meoruemkan. and it had independent legs. The Cheon-pan(top plate) was more left and right than both sides. Third, in the late Joseon Dynasty period as a feature of the metal ornaments, cast iron and yellow brass were used as materials. In the Japanese Ruling Era, nickel was mainly used. Various patterns were engraved and the number increased, and it became gorgeous surface as a whole.

• Journal of agriculture & life science
• /
• v.45 no.6
• /
• pp.41-46
• /
• 2011

In this study, in addition to the green tea-wood fiber hybrid composite boards of previous researches, to make effective use of saw dust of domestic cypress tree with functionalities and application as interior materials, eco-friendly hybrid composite boards were manufactured from wood fiber, green tea and saw dust of cypress tree. We investigated the effect of the component ratio of saw dust and green tea on static bending strength performances. Static bending MOE (modulus of elasticity) was within 0.956~1.18GPa, and showed the highest value in wood fiber : green tea : saw dust = 50 : 40 : 10 of the component ratio, and had the lowest value in 50 : 30 : 20 of component ratio. These values were 2.0~3.1times lower than those of green tea-wood fiber hybrid composite boards reported in the previous researches. The bending MOR (modulus of rupture) showed 8.99~11.5MPa, the change of the bending MOR with component ratio of the factors was the same as that of bending MOE. These values had 1.9~3.5 times lower value than those of green tea-wood fiber hybrid composite boards, and showed the slightly lower values than the MOR of particle boards (PB) and medium density fiberboards (MDF) prescribed in Korean Industrial Standard. Therefore, it is considered that these hybrid composite boards need to improve strength performances by component ratio change, hybrid composite with other materials and adhesive change etc. in order to industrialize the hybrid composite boards.

• The Journal of Korean Physical Therapy
• /
• v.6 no.1
• /
• pp.23-35
• /
• 1994

In this research, the mentally-handicapped children being able to be trained were investigated the actual condition of train function making 40 mentally-handicapped children in Kummi Hyedang Spacial Education School, to exmine the effect of physical exercise function when training the mentally-handicapped children who can be trained as applying exercise education programs, and trains for 10 weeks by assigning to both experiment group and control group according to children who are similar to training functions from pre-examination. The results are in following: First, the results of test in the exercise ability of mentally-handicapped children with the degree of being able to trained are very delayed in comparison with normal mental children through the both top and bottom examination. The developments of 5 exercise functions classified by domain, have the order of eyesight exercise, softness, physical strength, quickness, parallelism, the interaction of both eye and hand, and, have the exercise function being equal to the level of between 6 and 12 years old. In 13 bottom test, throwing bean-bag is equal to the nomal 12 years old boy. the board jump, sitting position / bending forward / closing are equal to the level of 12 years old boy. standing with only leg is the level of 9 years old, threading pearls is 7 years old, transfering the wood building, picking the upper body up, walking board, balancing one leg with opened, eye, fist / opening palm / palm, bending and opening arm with postrating on chair, are the exercise functions of below 6 years old. Second, there are great effects in carrying out the exercise education program to the mentally-handicapped children with the level of being able to trained. In experiment group, it is elevated to the middle level of 12 years old nomal children. Classified by domain of test the board jump, training, the bean-bag are far higher level than 12 years old normal children, and are elevated the level of 11 years old boy. Balancing only leg with closed eye is below the level of 10 years old boys, fist / opening palm / palm are the level of 9 years old boys. There and back running, picking the upper body is the level of 9 years old girls. Walking board is the level of 8 years old boys. Bending and opening arm with postrating on chair is the level of 7 rears old boy. Balancing one leg with opened eye is elevated to the level of f years old girls. These functions have the more balanced exercise function rather than pre-examination. In control group, they have little change by classified the bottom test, but have the exercise function on the time of pre-examination, go backward in physical strength. quickness. Third, the exercise function being learned by exercise education program on the mentally-handicapped children of the level with being able to train is appeared to maintain continuately. Softness, physical strength, quickness, eyesight training are maintained the learned exercise function, the interaction of both eye and hands, parallelism are delayed a little. Classified by the bottom test. threading pearls, transfering the wood building, throwing the bean-bag, sitting position / rolling forward / reaching, the broad jump and picking upper body up, there and bark running, picking upper body up, balancing with only leg as opened eye, bending and opening arm with postrating on chair, etc. are maintained. Fist / opening palm / palm, balancing with only leg as opened eye are delayed a little. The change of body position is elevated. Seeing these results, it is appeared to the mentally-handicapped children that the exercise education programs, which is suitable their actual condition and acomplishes in voluntary participation, have very positive effect. So, to develop the function of body exercise in mentally-handicapped children with the level of being to able to be trained, the measures must be groped so that the exercise education programs can be practiced positively, and the ,body exercise can be experienced more.

• Journal of the Korean Wood Science and Technology
• /
• v.16 no.2
• /
• pp.1-41
• /
• 1988

For the purpose of utilizing the sawdust having poor combining properties as board raw material and resulting in dimensional instability of board, polypropylene chip (abbreviated below as PP chip) or oriented PP thread was combined with sawdust particle from white meranti(Shorea sp.). The PP chip was prepared from PP thread in length of 0.25, 0.5, 1.0 and 1.5 cm for conventional blending application. Thereafter, the PP chip cut as above was combined with the sawdust particle by 3, 6, 9, 12 and 15% on the weight basis of board. Oriented PP threads were aligned with spacing of 0.5, 1.0 and 1.5cm along transverse direction of board. The physical and mechanical properties on one, two and three layer boards manufactured with the above combining conditions were investigated. The conclusions obtained at this study were summarized as follows: 1. In thickness swelling, all one layer boards combined with PP chips showed lower values than control sawdustboard, and gradually clear decreasing tendendy with the increase of PP chip composition. Two layer board showed higher swelling value than one layer board, but the majority of boards lower values than control sawdustboard. All three layer boards showed lower swelling values than control sawdustboard. 2. In the PP chip and oriented thread combining board, the swelling values of boards combining 0.5cm spacing oriented thread with 1.0 or 1.5cm long PP chip in 12 and 15% by board weight were much lower than the lowest of one or three layer. 3. In specific gravity of 0.51, modulus of rupture of one layer board combined with 3% PP chip showed higher value than control sawdustboard. However, moduli of rupture of the boards with every PP chip composition did not exceed 80kgf/cm2, the low limit value of type 100 board, Korean Industrial Standard KS F 3104 Particleboards. Moduli of rupture of 6%, 1.5cm-long and 3% PP chip combined boards in specific gravity of 0.63 as well as PP chip combined board in specific gravity of 0.72 exceeded 80kgf/$cm^2$ on KS F 3104. Two layer boards combined with every PI' chip composition showed lower values than control sawdustboard and one layer board. Three layer boards combined with.1.5cm long PP chip in 3, 6 and 9% combination level showed higher values than control sawdustboard, and exceeded 80kgf/$cm^2$ on KS F 3104. 4. In modulus of rupture of PP thread oriented sawdustboard, 0.5cm spacing oriented board showed the highest value, and 1.0 and 1.5cm spacing oriented boards lower values than the 0.5cm. However, all PP thread oriented sawdustboards showed higher values than control saw-dustboard. 5. Moduli of rupture in the majority of PP chip and oriented thread combining boards were higher than 80kgf/$cm^2$ on KS F 3104. Moduli of rupture in the boards combining longer PP chip with narrower 0.5cm spacing oriented thread showed high values. In accordance with the spacing increase of oriented thread, moduli of rupture in the PP chip and oriented thread combining boards showed increasing tendency compared with oriented sawdustboard. 6. Moduli of elasticity in one, two and three layer boards were lower than those of control sawdustboard, however, moduli of elasticity of oriented sawdustboards with 0.5, 1.0 and 1.5cm spacing increased 20, 18 and 10% compared with control sawdustboard, respectively. 7. Moduli of elasticity in the majority of PP chip and oriented thread combining boards in 0.5, 1.0 and 1.5cm oriented spacing showed much higher values than control sawdustboard. On the whole, moduli of elasticity in the oriented boards combined with 9% or less combination level and 0.5cm or more length of PP chip showed higher values than oriented sawdustboard. The increasing effect on modulus of elasticity was shown by the PP chip composition in oriented board with narrow spacing. 8. Internal bond strengths of all one layer PP chip combined boards showed lower values than control sawdust board, however, the PP chip combined boards in specific gravity of 0.63 and 0.72 exceeded 1.5kgf/$cm^2$, the low limit value of type 100 board and 3kgf/$cm^2$, type 200 board on KS F 3104, respectively. And also most of all two, three layer-and oriented boards exceeded 3kgf/$cm^2$ on KS F. 9. In general, screw holding strength of one layer board combined with PP chip showed lower value than control sawdustboard, however, that of two or three layer board combined with PP chip did no decreased tendency, and even screw holding strength with the increase of PP chip composition. In the PP chip and oriented PP thread combining boards, most of the boards showed higher values than control sawdustboard in 9% or less PP chip composition.

• Journal of the Korean Wood Science and Technology
• /
• v.36 no.1
• /
• pp.45-53
• /
• 2008

The burning behaviors of board for flooring materials were investigated using cone calorimetry at an incident heat flux of $50kWm^{-2}$. Seven domestic flooring materials were used to observe the burning behavior of maximum heat release rate, total heat release and average heat release rate. The experimental data indicated that the medium density fiberboard (MDF) flooring had higher release rate than the other flooring materials. Also, the mass loss of MDF flooring was higher than the other floors. When measuring the smoke production from burning, PE fiberboard flooring and PVC Plastic Resin Sheet showed higher carbon monoxide and carbon dioxide yield than the others. The average smoke release of both carbon dioxide and carbon monoxide through specific extinction area was similar. Toxic smoke measurement from flooring materials were determined by the mouse stop motion, and the results indicated that MDF flooring contains more toxic material than the other flooring materials.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.31 no.6
• /
• pp.965-970
• /
• 2002

This study was conducted to investigate inhibition effect of sanitizers against E. coli and a hygienic condition on the surface of utensils and equipments which were used to food service. Samples swabbed using cotton were collected from the surface of stainless steel, wood and plastic utensils and equipments which were used to food service at four elementary schools in Busan and analyzed by measuring the total, coliform and Salmonella spp. count. Total plate counts were 10$^4$~10$^{5}$ CFU/100 cm$^2$ in most of utensils and equipments except plastic cutting board. There were lots of coliforms in slicer (2.8$\times$10$^1$CFU/100 cm$^2$) and peeler (1.1$\times$10$^1$CFU/100 cm$^2$). It was indicated that the sanitary condition of some utensils and equipments such as slicer and peeler should be improved promptly. To investigate inhibition effect of sanitizers against E. coli, the surface of utensils and equipments used in food service was treated at different concentration of sodium hypochlorite for 1 minute and 3 minutes, respectively. The plastic utensils and equipments were most effective aganist E. coli at 100 ppm sodium hypochlorite for 3 minutes. But the stainless steel and wood were most effective at 200 ppm sodium hypochlorite for 3 minutes. It was also treated with 70% ethyl alcohol for 10 seconds and 30 seconds, respectively. The stainless steel utensils and equipments were most effective aganist E. coli at 10 seconds, but plastic and wood were most effective at 30 seconds. Therefore, the results of this study indicated that standardization of disinfection method of utensils and equipments used in food service should be given and sanitation training for dietition should be conducted continuously.

• Journal of agriculture & life science
• /
• v.46 no.2
• /
• pp.9-17
• /
• 2012

In this study, in addition to the green tea - wood fiber hybrid composite boards of previous researches, to make effective use of saw dust of domestic cypress tree with functionalities and application as interior materials, eco-friendly hybrid composite boards were manufactured from wood fiber, green tea and saw dust of cypress tree. We investigated the effect of the component ratio of saw dust and green tea on dynamic MOE (modulus of elasticity). Dynamic MOE was within 1.41~1.65 GPa, and showed the highest value in wood fiber : green tea : saw dust = 50 : 40 : 10 of the component ratio, and had the lowest value in 50 : 30 : 20 of component ratio. These values were 1.4~1.6 times higher than static bending MOE of wood fiber - saw dust - green tea hybrid composite boards, and were 2.0~2.9 times lower than those of green tea - wood fiber hybrid composite boards reported in the previous researches. From the results of correlation regression analyses between dynamic MOE and static strength performances, a very high correlation coefficients were obtained, therefore it was found that static bending strength performances can be estimated with a high reliability from dynamic MOE.

• Fire Science and Engineering
• /
• v.29 no.1
• /
• pp.12-18
• /
• 2015

This study has conducted an experiment of comparing the flame resistant performance and combustion characteristics according to flame resistant treatment using the Cypress Luba and particle board that is commonly used for interior decoration and furniture. As a result of testing the flame resistant performance of Cypress Luba, the Cypress Luba injected with flame resistant resin using the vacuum pressure treatment has shown to have better performances (carbonized area 9.55% and carbonized length 22.91%) than the Cypress Luba treated with flame resistant coating having rubberized plastic components on its surface. For particle board, the specimen attached with fireproof film was identified to be better (carbonized area 40.10% and carbonized length 43.40%) than the specimen with non-fireproof film. For the results of combustion characteristics using the Cone Calorimeter, the specimen treated with flame resistant coating on the surface had faster ignition than the Cypress Luba injected with fire resistant resin using vacuum pressure treatment, and in the total release of calories, the Cypress Luba injected with fire resistant resin using vacuum pressure had $68.2MJ/m^2$, and the specimen treated with fire resistant coating on the surface had $111.52MJ/m^2$. For the particle board, the ignition time had a little difference but in the total release of calories, the specimen attached with fireproof film had $90.1MJ/m^2$ and the specimen with non-fireproof film had $107.6MJ/m^2$.