• Journal of Yeungnam Medical Science
• /
• 제5권2호
• /
• pp.213-219
• /
• 1988

만성폐쇄성 폐질환을 동반한 노인환자에서 척추마취하에서 치골상부 전립선 절제술을 시행하는 도중 척추마취와는 무관한 것으로 사료되는 원인 불명의 경련 발작 및 혈압강하가 초래된 환자가 발생하였기에 그 원인을 규명하고 문헌적 고찰과 함께 보고하는 바이다.

• 대한수학회보
• /
• 제45권2호
• /
• pp.375-384
• /
• 2008

Let $k={\mathbb{F}}_q(T)$ and ${\mathbb{A}}={\mathbb{F}}_q[T]$. Fix a prime divisor ${\ell}$ q-1. In this paper, we consider a ${\ell}$-cyclic real function field $k(\sqrt[{\ell}]P)$ as a subfield of the imaginary bicyclic function field K = $k(\sqrt[{\ell}]P,\;(\sqrt[{\ell}]{-Q})$, which is a composite field of $k(\sqrt[{\ell}]P)$ wit a ${\ell}$-cyclic totally imaginary function field $k(\sqrt[{\ell}]{-Q})$ of class number one. und give various conditions for the class number of $k(\sqrt[{\ell}]{P})$ to be one by using invariants of the relatively cyclic unramified extensions $K/F_i$ over ${\ell}$-cyclic totally imaginary function field $F_i=k(\sqrt[{\ell}]{-P^iQ})$ for $1{\leq}i{\leq}{\ell}-1$.

• Journal of Welding and Joining
• /
• 제15권2호
• /
• pp.72-80
• /
• 1997

The spatter generation rate of GMA welding with $CO_2$ gas shielding was measured with the change of welding conditions such as wire feeding rate and welding voltage and then the results were analized with the accompanying changes in metal transfer mode and in bead geometry. The spatter generation rate (SGR) was relatively low not only wit the short circuit transfer but with the truely globular transfer mode. However, the SGR resulted with the mixed mode were consistantly high. The resultant wave pattern of mixed mode was due to the coexistance of short-circuit and globular transfer and characterized by the frequent appearance of instantaneous short circuit. Considering the result of SGR and that of bead geometry, it could be concluded that when the wire feeding rate (or welding current) was either low or high, the optimum bead shape could be obtained along with the low spatter generation. However, in the middle range of wire feeding rate, the optimum bead shape was only obtained in the mixed mode condition resulting in the high spatter generation.

• 한국응용곤충학회지
• /
• 제26권4호
• /
• pp.267-268
• /
• 1987

토양에 첨가한 8종의 Oil cake 중 Margosa, Undi, Karanj cake은 생강뿌리썩음병의 발생을 억제하였다. 생강수량의 증진효과는 Karanj, Roselle, Mustard cake의 순으로 높았다.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2001년도 춘계학술대회 논문집
• /
• pp.267-270
• /
• 2001

A lot of efforts have been made to analyze the performance of the vehicle equipped with automatic transmission through simulation. It might be necessary to understand the different types of transmissions, i.e., different power flows, for different models. If there is a module that can be applied to different types of automatic transmission, it could be helpful to transmission-related engineers. This study has started up from this idea. The common bond graph has been obtained from several types of the automatic transmission. The overall generalized equations and kinematic constraint equations have been derived using virtual power sources on common bond graph. They are used to derive state equations and constraints. These equations have been applied as an application to the vehicle equipped with two simple planetary gear set type of Ravigneaux gear type automatic transmission. The state equation, kinematic constraints, and dynamic constraints have been derived in every gear and shift operation using overall generalized equations and kinematic constraint equations. Simulations for constraint speed running, standing-start running, rolling-start running, and LA-4 mode have been conducted to analyze the performance of the vehicle powertrain using GVPS(Generalized Vehicle Powertrain Simulation) program wit pull down menus.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 2002년도 ICCAS
• /
• pp.38.1-38
• /
• 2002

In steel works, Locomotives and torpedo ladle cars are used to convey the smelted iron that comes out Blast Furnace to the mill making mill. In this process, Identification of the vehicles position is very important because the area is broad and efficient operation affects a productivity and investment. At present condition, there are many ways to use to identify the vehicles number and position. This paper will present the new ways using GPS/DR based method. For this, we practiced the site test to gather the real data. First, we collect the velocity data at the wheel of the vehicles with the direction data via process computer. Second, after installing the gyroscope we gathered the data wit...

• 대한가정학회지
• /
• 제18권1호
• /
• pp.25-33
• /
• 1980

Effect of various batter ingredients o acid value, peroxide value, darkening of oil, and changes in volume after frying at 180- $190^{\circ}C$ for 3 times were determined. Organoleptic evaluation was also performed on the fried products. Fried product wit egg yolk raised the acid value, absorbed volume and darkening of frying oil than the control but the peroxide value was the lowest. on the contrary, fried product without egg lowered the acid value, absorbed volume and darkening of frying oil than the control but the peroxide value was high, and the sensory evaluation scores were generally higher in fried product without egg than in the product with egg yolk. In genera, fired products with potato, or potato plus ascorbic acid or carrot lowered the acid value, peroxide value, absorbed volume, and the darkening of frying oil. fried potato 0products were also favorable to the taste panel.

• 대한자기공명의과학회:학술대회논문집
• /
• 대한자기공명의과학회 2001년도 제6차 학술대회 초록집
• /
• pp.116-116
• /
• 2001

Purpose： PRESS is one of the representative sequences in MRS, but still, we do not have the formul describing the steady state magnetization of it. So, we derive the equation of th magnetization as a function of the echo time and the repetition time, and compare it wit phantom experiments. Method： PRESS consists of three 180 pulses and the additional crusher gradients whic destroy the unwanted coherences of the magnetization. Using the simple vector model, w derive a formula which describes the behaviour of the magnetization In PRESS and compa the results with the phantom experiment. Also, we explore the results of the T1 from STEAM, PRESS and the simple exponential.

• Journal of Mechanical Science and Technology
• /
• 제16권5호
• /
• pp.676-682
• /
• 2002

The laminar convective heat transfer in ventilated space with various horizontal partitions was studied numerically and experimentally For the numerical study, the governing equations were solved by using a finite volume method for various numbers Re, Gr, Pr and partition numbers. The experimental study was conducted by using a holographic interferometer. The isotherms and velocity vectors have been presented for various parameters. As the number and length of partition increased, convective heat transfer decreased. Based on the numerical data, correlation equations were obtained for the mean Nusselt number in term of Gr/Re$^2$. In the region of Gr/Re$^2$$\leq$ 1, the mean Nusselt number was small, but in the region of Gr/Re$^2$> 1, the mean Nusselt number was constant.

• 대한기계학회논문집A
• /
• 제24권5호
• /
• pp.1146-1154
• /
• 2000

Fatigue strength of NiAl and Ni$_3$Al particulate reinforced aluminum alloy composites fabricated by the diecasting method was examined at room and elevated temperatures. The results were compared wit h that of SiC particulate reinforced one. The particulate reinforced composites showed some improvement in the static and fatigue strength at elevated temperatures when compared with that of Al alloy. The composites reinforced by intermetallic compound particles showed good fatigue strengths at elevated temperatures especially $Ni_3AI_{p}/Al$ alloy composite showed good fatigue limit up to high temperature of 30$0^{\circ}C$. Adopting intermetallic compound particle as a reinforcement phase, it will be possible to develop MMC representing better fatigue property at elevated temperature.