• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2005년도 제36회 하계학술대회 논문집 D
• /
• pp.2690-2692
• /
• 2005

CAN communication can minimize the interfacing lines between equipments because it is composed of only the input and output lines, also is used for automatic system including vehicle, aircraft, railway vehicles and robot because the reliability of data is high by the capability of data-related error detect and correcting function. It can also improve the low-reliable and inefficient system which is composed of the existing Wiring Harness(W/H), so in case of vehicle, it is used in place of the present ECU as the new electro-control unit. In this paper, we constructed the electro-control unit of vehicle by using CAN communication and implemented system that could monitor the condition of vehicle through the web or mobile by connecting the electro-control unit to imbedded system. Such a system is expected to be helpful to the intelligent vehicle and the adoption of ACC(Adaptive Cruise Control).

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 2000년도 제15차 학술회의논문집
• /
• pp.111-111
• /
• 2000

The research of network system, being used to reduce automotive wiring harness, is reaching to the development of by-wire system. It is by-wire system that apply IVN(In-Vehicle-Network) to steering, braking system, and it has the advantage of mass-decreasing, easy to diagnose fault and so on. But until now, many developed device can't satisfied with reliability that system have ever had. So redundancy of each network module, i.e., It is only way to make backup module. This paper researches development of network module and redundancy management of backup module when error occurred for implementation of brake-by-wire system.

• 한국생산제조학회지
• /
• 제23권6호
• /
• pp.624-629
• /
• 2014

The purpose of this study is to carry out the task of engine hesitation which occurred intermittently in driving due to the defective CKPS of LPI vehicles. As the result of the wrong data from the equipment of D-logger, the signal error of CKPS caused the engine hesitation. We performed a study in the followings to analyze and investigate the cause effectively. First, we have investigated the control wiring harness and connector pin contact defect inspection. Second, we have inspected the defection of CKPS separately. From this study, it was found that the engine hesitation were caused by the bad durability and we have showed how to diagnosis the fault of the engine hesitation intermittently while driving. Therefore, it is determined that we have to improve the durability of the CKPS through a strict quality control and to increase the reliability.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2000년도 하계학술대회 논문집 D
• /
• pp.2542-2544
• /
• 2000

In this paper, CAN(Controller Area Network)is used to solve the wire harness problem in the outside mirror of automobile which has a lot of functions in narrow space. If the number of wires is reduced, it has benefits of lower product cost and maintenance. CAN was originally developed by the German company Robert Bosch for use in the car industry to provide a cost-effective communications bus for in car electronics and as alternative to expensive and cumbersome wiring looms. CAN controller is a serial communication protocol which efficiently supports distributed real-time control with a very high level of security. The communication between master CAN controller and slave CAN controller is realized and controller's performance is tested by experiment.

• 한국신뢰성학회지:신뢰성응용연구
• /
• 제6권4호
• /
• pp.307-315
• /
• 2006

차량 전장품 중 와이어링 하네스에서 큰 전류가 흐르는 회로의 연결 단자가 가지는 전기적 내구 성능 및 기계적 성능을 확보하기 위하여 단자 압착부의 압축율 최적화 기법을 개발하였다. 우선 단자 제작 과정을 표준화한 후 압착부의 주요 인자인 기계적 인장강도와 내부 부식 정도에 의한 전기적 저항 중대로 화재가 발생 가능성 관점에서 접근하였다. 여러 가지 실험을 통하여 얻어진 DATA를 분석한 결과 회귀 2차 모형을 사용하여 대전류 단자 압착부의 전기적/기계적 내구 성능 최적화 구간을 설정 하였으며, 이의 과정을 제시 하였다.

• 항공우주시스템공학회지
• /
• 제15권6호
• /
• pp.50-58
• /
• 2021

Byteflight is developed based on RS-485 communication (an international standard), and it can be used as a data bus during the operation of an integrated avionics system in the latest aircraft. Therefore, the integrated avionics system can perform an effective and safe flight mission only when the accurate and seamless display of flight information, communication, and accurate functions of navigation are implemented. In this study, cause analysis and failure investigation were performed on screen abnormalities and communication interruptions due to signal interference in the Byteflight data bus of the integrated avionics system during aircraft operation. To improve signal interference between avionics units, the branch point and wiring path of the Byteflight data bus were changed, and the verification result of the improved method was also described.

• 항공우주시스템공학회지
• /
• 제15권2호
• /
• pp.45-51
• /
• 2021

In this study, we aim to eliminate the flickering phenomenon in multi-function display (MFD) units during the flight of fixed-wing aircraft. To execute flight missions effectively, the video signals transmitted to MFDs must provide information accurately and seamlessly. Therefore, a method for addressing the flickering phenomenon-including cause analysis and failure diagnosis-is adopted; specifically, a wiring configuration with a direct connection between the video signal cables and with a short cable length is adopted. The proposed method is experimentally verified using a flight test.

• 예술인문사회 융합 멀티미디어 논문지
• /
• 제9권3호
• /
• pp.261-270
• /
• 2019

4차 산업혁명의 도래와 함께 제조 환경의 다품종화가 더욱 급격히 진행되고 있다. 다품종화된 생산 환경은 전반적인 생산계획 및 관리를 더욱 어렵게 하고 있으며, 효과적인 작업순서 결정을 통한 생산 효율 제고의 필요성을 더욱 높이고 있다. 기본적으로 효과적인 작업순서는 설비의 셋업을 감소시키고 설비의 효율적 활용과 함께 셋업 시간 단축을 도모하여 궁극적으로는 생산성 향상에 기여할 수 있다. 본 연구는 단일 기계가 다중 작업을 수행하는 상황에서의 효율적인 작업순서 결정 문제를 다룬다. 이는 대부분의 기존 연구에서 다루고 있는 한 대의 기계에서 하나의 작업만을 수행하는 경우와 비교할 때 문제의 복잡성이 매우 높다. 본 연구에서는 특히 셋업 횟수를 최소화하기 위한 정수계획 모형을 제안한다. 이는 자동차 전장 구성품의 하나인 와이어링 하네스 제조 공정을 대상으로 주어진 생산주문을 처리하는 과정에 금형 교체횟수를 최소화하는 문제를 대상으로 한다. 또한 제안된 수리 모형의 유효성을 검증하기 위해 간단한 사례연구 결과를 함께 제시한다.

• 한국자동차공학회논문집
• /
• 제10권4호
• /
• pp.175-180
• /
• 2002

In order to satisfy the requirements of time reduction and cost saving for development of electronic control systems(ECU) in automotive industry, the applications of a standardized real-time operating system(RTOS) and a communication protocol to ECUs are increased. In this study, a body control module(BCM) that employs OSEK/VDX(open system and corresponding interfaces for automotive electronics/vehicle distributed executive) OS tour the RTOS and a controller area network(CAN) fur the communication protocol is designed, and the performances of the system are evaluated. The BCM controls doors, mirrors, and windows of the vehicle through the in-vehicle network. To identify all the transmitted and received control messages, a PC connected with the CAN communication protocol behaves as a CAN bus emulator. The control system based upon in-vehicle network improves the system stability and reduces the number of wiring harness. Furthermore it is easy to maintain and simple to add new features because the system is designed based on the standards of RTOS and communication protocol.

• 품질경영학회지
• /
• 제51권2호
• /
• pp.297-313
• /
• 2023

Purpose: The purpose of this study is to investigate the causes of shifting errors reported in military tracked vehicles and to improve related quality to prevent recurrence. Methods: A systematic disassembly and inspection of the transmission is carried out and an experimental simulation is conducted to reproduce the shifting error phenomenon. Electrical characteristic tests are subsequently performed and microscopic observation is also carried out on the disassembled connector parts such as pins and fractured surfaces. Results: Oil contamination and swelling deformation are observed in the connector to the vehicle due to oil leakage of its counterpart connector to the transmission. This causes electrical contact failure between both connectors in the fastened state, and it is found that shifting error of the tracked vehicle could occur subsequently. To prevent the recurrence of this phenomenon, comprehensive quality improvement is conducted including product improvement of the wiring harness assembly and strengthening activities for quality control and preventive maintenance. Conclusion: This study is expected to be helpful as a prior case study for cause analysis and recurrence prevention in the event of similar cases in the future.