• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.15 no.2
• /
• pp.57-63
• /
• 2015

There are increasing demands for the transmission of high speed and non-compressed video informations. The video data usually compressed before transmission for reducing the data. And the received data uncompressed at a receiver, consequently the processing delay is unavoided. In this paper, we implement a 60 GHz band wireless transmission system for real time multimedia contents transmission, and successfully transmit the full HD class uncompressed video information at 4 Gbps with 20 m apart. Hence the non-compressed video data from a remote camera or a smart phone can be transmitted and displayed in a large screen in real time via the developed transceiver system.

• Journal of Korea Multimedia Society
• /
• v.15 no.12
• /
• pp.1464-1474
• /
• 2012

In this paper, we propose a QoS (Quality of Service)-aware and cooperative resource reservation scheme using cross-layer link adaptation for wireless high definition video transmission through UWB (Ultra Wide Band) network with D-MAC (Distributed Medium Access Control). A wireless high definition video transmission system usually requires stable high throughput even without line-of-sight, e.g., a destination device in another room separated by a wall. Since the WiMedia D-MAC supporting DRP (Distributed Reservation Protocol) scheme causes lots of DRP resource reservation conflicts due to failure of beacon detection in wireless channel environment, overall performances of the WiMedia D-MAC can be deteriorated. And the current WiMedia MAC standard has not considered QoS provisioning even though QoS parameters such as a range of service rates are provided to each traffic stream. Therefore, we propose Relay DRP protocol with QoS-based relay node selection criterion, which makes a relay path to avoid DRP resource reservation conflicts and guarantee QoS more stably through cross-layer link adaptation of cooperative relay transmission scheme and is compliant with the current WiMedia D-MAC protocol. Simulation results demonstrate performance improvements of the proposed method for throughput and QoS provisioning.

• KIPS Transactions on Computer and Communication Systems
• /
• v.1 no.1
• /
• pp.29-34
• /
• 2012

Wireless multicast service can be used for video streaming service to save the network resources by sending the same popular multimedia contents to a group of users at once. For better multimedia streaming multicast service, we propose a quality-aware rate adaptation (QARA) scheme for scalable video multicast in rate adaptive wireless networks. In QARA, transmission rate is determined depending on the content's type and users' channel conditions. First, the base layer is transmitted by a low rate for high reliability. That means we provide basic service quality to all users. On the contrary, the transmission rate for enhancement layer is adapted by using channel condition feedback from a randomly selected node. So, the enhancement layer frames in a multimedia content is sent with various transmission rates. Therefore, each node can be provided with differentiated quality services. Consequently, QARA is capable of serving heterogeneous population of mobile nodes. Moreover, it can utilize network resources more efficiently. Our simulation results show that QARA outperforms utilization of the available transmission rate and reduces the data transmission time.

• Journal of Broadcast Engineering
• /
• v.14 no.1
• /
• pp.44-58
• /
• 2009

To provide efficient video streaming service over a wireless networks, the rate adaptation scheme should be applied at the low layer and the quality adaptation scheme should be considered at the high layer. In this paper, we propose a new cross-layer design which includes rate adaptation scheme at the MAC/PHY layers and quality control at the application layer. Proposed rate adaptation scheme improves the wireless channel utilization by transmitting the consecutive frames and selects optimal transmission mode by calculating the goodputs for each transmission mode. Based on selected transmission mode, the rate adaptation scheme calculates the rate limits and informs that to the application layer. Then the video streaming application utilizes this rate limits to adjust the quality of the video stream. Through performance evaluations, we prove that our cross-layer design improves the quality of the wireless video streaming service by means of the proposed rate adaptation scheme.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.35 no.8A
• /
• pp.820-827
• /
• 2010

In these days, video applications for special purposes such as video conference systems among multiple users and video surveillance systems require multiple video connections and QoS guarantee. The video systems employ IEEE 802.11 Wireless LAN devices to support broadband wireless interfaces and easy internet accesses for cheaper prices. However, according to the current IEEE 802.11e HCCA standard, if more than three video sessions are established in WSTA services, some of them must share the TXOP because the available number of TSIDs for video transmission is two. In order to resolve the problem, we devised a method which can establish up to 15 video sessions by slightly modifying the frame structure while maintaining the compatibility with current standard. Our method is implemented on the NCTUns 4.0 network simulator, and evaluated not only numerically in terms of throughput, delay, and PSNR, but also experimentally in the sense of real video clips that are used as input to our simulation. The results showed that our method sufficiently guarantees the transmission bandwidth requested by each video session.

• International Journal of Quality Innovation
• /
• v.10 no.1
• /
• pp.115-126
• /
• 2009

Video transmission effectiveness in the Ad Hoc network is becoming important recently, if different routing protocols are applied. Some researchers conclude that the reactive protocols are better for file transfer protocol (FTP) and constant bit rate (CBR) or hypertext transfer protocol (HTTP) transmission in an Ad Hoc wireless network but the performance report of video transmission is not much. This study adopts Qualnet (Network Simulator) as a simulation tool for environmental designing and performance testing, and employs an experimental design with eight groups. Our experiment shows that: (1) The performance of AODV (reactive) protocol is better than DSDV, ZRP and DSR when the transmission load has only one video stream; (2) Proactive (DSDV) and Hybrid protocols (ZRP) are better for a smaller Ad Hoc network when it transmits a video stream with some applications (VoIP, FTP and CBR). We conclude that packet loss rate is sensitive to the quality of video transmission and it has negative relationship with Peak Signal-to-Noise Ratio (PSNR) value. In addition, our experiment also shows that PSNR is a simple Metric for the performance evaluation of video transmission.

• Journal of Korean Association for Spatial Structures
• /
• v.19 no.4
• /
• pp.103-110
• /
• 2019

The cable-based retractable membrane roof makes it impossible to maintain its shape and stiffness during driving process, unlike the hard-type retractable roof. Consequently, monitoring using a relatively simple wireless video transmission device is required. However, since video data has a bigger transmission rating than other monitoring data in terms of the structure velocity or acceleration, there is a need to develop transmission device that is easy to install and entails low maintenance cost. This paper studies on a real-time video transmission system for monitoring the cable-based retractable membrane roof while driving. A video transfer software, using the mobile network, is designed and the embedded system is constructed. Ultimately, the data transmission server is tested. Connecting a trolley to the system allows testing of the validity and efficiency of the developed system through the video data transmitted in the driving process. Result of the test shows that the developed system enables multi-device data transfer with monitoring via the mobile network.

• Journal of Broadcast Engineering
• /
• v.21 no.5
• /
• pp.662-671
• /
• 2016

In this paper, we propose a wireless video transmission system, providing medium and long communication distance in the 5.8GHz band to decrease the loss of video data. Beamforming with multiple antennas in a radio environment to enable more than 10km communication distance and an image transmission method that combines the retransmission to MCS(modulation and coding scheme) are applied. By applying the proposed method in the indoor environment of 80dB attenuation using the payload size of 1000 bytes, the packet loss rate of at least 0.92% is achieved through the FPING with the time-out of 10ms. The transmission distance of 21.2Km is achieved with the transmission rate of 13Mbps in the outdoor environment.

• Journal of IKEEE
• /
• v.9 no.2 s.17
• /
• pp.170-178
• /
• 2005

The video data corrupted by the transmission error due to packet loss induce error propagation in decoded video data, and cause poor video quality. To remedy these corrupted video data, there have been introduced two types of error concealment techniques: spatial or temporal error concealment algorithm. Computational overhead by using spatial error concealment algorithm is a serious disadvantage in mobile video data streaming environment. In this paper, we propose hybrid type error concealment technique recovering video quality of mobile device using MPEG-4 video streaming on error-prone wireless network. Our algorithm is implemented in MPEG-4 decoder. The algorithm adopts Intel Wireless MMX technology to provide high performance of portable embedded multimedia mobile device. It is proven that the proposed algorithm shows expected performance for a mobile streaming system(PDA) on IP channels. Our approach showed better processing speed and better video quality comparing with traditional error concealment algorithm.

• The Journal of The Korea Institute of Intelligent Transport Systems
• /
• v.12 no.2
• /
• pp.38-44
• /
• 2013

In this paper, we designed and implemented a mobile video transmission device with 1080i resolution and 30fps frame rate using wireless multi-access technologies. The video acquisition delay time of 16us and jitter of 21ms for this equipment were obtained, respectively. The device is designed to access various communication networks. In order to evaluate the performance of its video transmission capability, a server and monitoring viewer are implemented. In the performance test using LTE network, 211ms delay time was obtained at 3Mbps transmission. Rendering of 1fps frame rate at the 265kbps transmission was confirmed for the transmission test using Inmarsat network.