• Journal of Communications and Networks
• /
• v.13 no.1
• /
• pp.70-76
• /
• 2011

This paper presents the unified user equipment (UE) baseband modulation and demodulation (modem) hardware platform architecture to support multiple radio access technologies. In particular, this platform selectively supports two systems; one is HEDGE system, which is the combination of third generation partnership project (3GPP) Release 7 high speed packet access evolution (HSPA+) and global system for mobile communication (GSM)/general packet radio service (GPRS)/enhanced data rates for GSM evolution (EDGE), while the other is LEDGE system, which is the combination of 3GPP Release 8 long term evolution (LTE) and GSM/GPRS/EDGE. This is done by applying the flexible pin multiplexing scheme to a hardwired pin mapping process. On the other hand, to provide stable connection, high portability, and high debugging ability, the stacking structure is employed. Here, a layered board architecture grouped by functional classifications is applied instead of the conventional one flatten board. Based on this proposed configuration, we provide a framework for the verification step in wireless cellular communications. Also, modem function/scenario test and inter-operability test with various base station equipments are verified by system requirements and scenarios.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.3 no.1
• /
• pp.75-82
• /
• 1999

This paper describes the implementation of wireless realtime monitoring system using modified CSMA/CA protocol. This system consists of wireless modem, central monitor, mobile station, DB server, and offer advantage of mobility, reduced installation time, long-term cost savings, and so on. And this system offers patient position pursuit service. Patient position pursuit service must be offered to deal with emergency which can be occured during patient movement. This paper proposes modified CSMA/CA protocol and patient position pursuit algorithm, implements wireless realtime monitoring system using it.

• Proceedings of the Korean Institute of Communication Sciences Conference
• /
• 2004.11a
• /
• pp.366-366
• /
• 2004

• Proceedings of the Korean Institute of Communication Sciences Conference
• /
• 2004.11a
• /
• pp.365-365
• /
• 2004

• Journal of Advanced Navigation Technology
• /
• v.14 no.3
• /
• pp.384-390
• /
• 2010

Since many accidents have been constantly occurring in the workplace, requirements of Industrial Safety Management have also been increasing. In order to meet the needs and prevent the problems in advance, we designed wireless sensor network system based on PLC. This system is set with amain node including PLC Modem and Zigbee in the every workplace and each wireless sensor node is attached to every worker in the workplace. The main node is supposed to transmit and receive sensor data, and the data which is from a wireless sensor node to the main node is delivered to monitoring PC through PLC. In this paper, it is expected that, by perceiving the realtime situation of the work place through this system, we could prevent the problems in advance and reduce damages by accidents.

• Journal of the Institute of Electronics and Information Engineers
• /
• v.52 no.1
• /
• pp.175-181
• /
• 2015

In this paper, we develop a 2.4GHz ISM band wireless communication platform prototype based on embedded linux which support can be u-Hospital service. The developed system is available connecting between ARM920T processor board and FPGA board and linking IEEE 802.11b PHY board, AD/DA(10Bit) and RF(2.4GHz) board for wireless access. It is also can be utilized for the embedded system design with IEEE 802.11b/g Access Point(Option: IEEE 802.11a/b/g) test due to the Embedded Linux. Also, the developed system is possible to test and verify the radio access technology, Modem(OFDM etc) and IP(Intellectual Property) circuit. And make the most use of the system, we search for a expansion to that home and mobile healthcare, wellness service application.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2003.10a
• /
• pp.941-944
• /
• 2003

This paper implement Telemetry System which is used Bluetooth. This System propose system which can detect a total amount of gas, electricity or water without a motorman, at home. BlueTooth is a close range wireless communication technology which uses a wireless frequency 2.4GHz and has a high trust and self - error correction technology according to a low power consumption quality and a high-speed frequency hopping. This makes get a high trust concerning a data transmission than an existing modem. In addition, though wireless modem is restricted by a minimal of a wireless terminal, it will be possible to coincide with the function of the portable with the low power consumption quality by using Bluetooth. And as the system on a chip of module progresses, the possibility of the snail size is present. And, Motorman who use mobility of embedded system can detect detect a total amount of gas, electricity or water outdoor. Embedded system use ARM processor that is low power processor. So it ran use long time efficiently.

• Proceedings of the Korean Geotechical Society Conference
• /
• 2010.09a
• /
• pp.1289-1293
• /
• 2010

A slipring or FORJ are usually adopted in order for power supply of Geo-centrifuge and input/output data acquisition. Since using slipring causes quite a lot electrical noise, an optical communication using FORJ becomes more general for data acquisition. Such data acquisition devices, however, require frequent maintenance and replacement due to deterioration by long term usage. DICT has set up a real-time wireless date acquisition system using wireless communication technology instead of FORJ. The system enables a remote measurement at any inertial acceleration field up to 100g level and provides as same performance as FORJ. The priority of this system is to use a normal modem substituting a special FORJ.

• Proceedings of the KAIS Fall Conference
• /
• 2010.11a
• /
• pp.417-420
• /
• 2010

최근 UWB, IEEE802.11n과 같은 고속 무선 통신에서는 고속의 암호/복호 처리가 요구되고 있다. 본 논문은 UWB, Zigbee, IEEE802.11과 같은 최신 무선 통신 기술에서 보안 기능의 근간이 되는 CCM(CTR+CBC-MAC) 보안 모드 구현에 관한 것이다. AES와 같은 블록암호알고리즘과 결합된 CCM 기능을 하드웨어로 구현하는 방법을 제시한다. 특히, MAC, DMA모듈과 Hard-wired된 형태로 구현하여 통신속도 저하없이 무선 데이터 송/수신과 동시에 실시간으로 암호/복호 연산을 수행할 수 있으며, CCM 구동 clock을 최소화하여 고속 동작과 저전력 설계의 목적을 달성할 수 있다.

• Journal of Electrical Engineering and Technology
• /
• v.5 no.1
• /
• pp.151-155
• /
• 2010

Reconfigurable radio technology is needed to reconstruct frequency and modem functionality, which can be different in various regions. In addition, it makes a single mobile handset capable of supporting various standards of wireless communication and thus plays a key role in mobile convergence. An MMIC VCO (voltage controlled oscillator) has been developed for high power and wide bandwidth where Clapp-Gouriet type oscillators are adapted for series feedback, and was fabricated based on 0.15um pHEMT of TRW. The MMIC VCO was connected to an aluminar substrate on the carrier for testing. This MMIC VCO module showed good performance in comparison to existing works. Furthermore, it can be potentially extended to reconfigure an MMIC VCO for wireless systems such as military applications and satellite communications.