• Journal of Institute of Control, Robotics and Systems
• /
• v.17 no.7
• /
• pp.720-729
• /
• 2011

The demand for wireless technology in home automation systems has recently been increasing due to several advantages such as installation cost reduction, easy placement, easy extension, aesthetic benefits, and mobile device connectivity. Among the many wireless technologies, ZigBee is one of the most useful for home automation; a wireless home networking system can be configured using ZigBee alone. Compatibility with conventional home networking systems that are based on wired media, however, is not supported. KNX is a mature protocol for wired media that is recognized as an international standard. This paper proposes a KNX-ZigBee gateway to interface between KNX and ZigBee systems and thereby enable integration of wired and wireless home automation systems.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.16 no.4
• /
• pp.737-744
• /
• 2012

Recently VoIP has provided voice(both wired and wireless from IP-based) as well as the transmission of multimedia information. VoIP used All-IP type, Gateway type, mVoIP etc. Wired and wireless VoIP has security vulnerabilities that VoIP call control signals, illegal eavesdropping, service misuse attacks, denial of service attack, as well as wireless vulnerabilities etc. from WiFi Zone. Therefore, the analysis of security vulnerabilities in wired and wireless VoIP and hacking incidents on security measures for research and study is needed. In this paper, VoIP (All-IP type, and for Gateway type) for system and network scanning, and, IP Phone to get the information and analysis of the vulnerability. All-IP type and Gateway type discovered about the vulnerability of VoIP hacking attacks (Denial of Service attacks, VoIP spam attacks) is carried out. And that is a real VoIP system installed and operated in the field of security measures through research and analysis is proposed.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2012.05a
• /
• pp.232-234
• /
• 2012

NMEA2000 international standards was developed for real-time communication among sensors and devices in ships. This paper describes analysis of NMEA2000 network protocols and implementation of a gateway for wireless data services in NMEA2000 networks. For scalability of the network, developed gateway didn't participate in NMEA2000 network but simply relayed data between wireless devices and the network.

• Journal of the Korean Society for Precision Engineering
• /
• v.24 no.6
• /
• pp.23-30
• /
• 2007

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2015.05a
• /
• pp.895-896
• /
• 2015

With the development of sensor, wireless mobile communication, embedded system and cloud computing, the technologies of Internet of Things have been widely used in logistics, Smart devices security, intelligent building and o on. Bridging between wireless sensor networks with traditional communication networks or Internet, IoT gateway plays n important role in IoT applications, which facilitates the integration of wireless sensor networks and mobile communication networks or Internet, and the management and control with wireless sensor networks. The IoT Gateway is a key component in IoT application systems but It has lot of security issues. We analyzed the trends of security and privacy matters.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• v.5 no.5
• /
• pp.959-975
• /
• 2011

Wireless mesh networks enlarge the wireless coverage area by interconnecting relatively stationary wireless routers (mesh routers). As wireless mesh networks are envisioned to provide high-bandwidth broadband Internet service to a large community of users, the Internet gateway, which acts as a central point of Internet attachment for the mesh networks, is likely to suffer heavily from the scramble for shared wireless resources because of aggregated traffic toward the Internet. It causes performance decrement on end-to-end transmissions. We propose a scheme to balance the load in a mesh network based on link quality variation to different Internet gateways. Moreover, under the mesh coverage, mobile nodes can move around and connect to nearby mesh routers while still keeping the connections to the Internet through the best gateway in terms of link quality. In this structure, gateways perform the balancing procedure through wired links. Information about gateways and mobile node's location is distributed appropriately so that every mesh router can quickly recognize the best gateway as well as the positions of mobile nodes. This distributed information assists mobile nodes to perform fast handoff. Significant benefits are shown by the performance analysis.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• v.9 no.8
• /
• pp.3079-3089
• /
• 2015

In this paper, a smart constrained application protocol (CoAP)-based gateway with a border router is proposed for home safety services to remotely monitor the trespass, fire, and indoor air quality. The smart CoAP gateway controls a home safety sensor node with a pyroelectric infrared motion sensor, a fire sensor, a humidity and temperature sensor, and a non-dispersive infrared CO2 sensor and gathers sensing data from them. In addition, it can convert physical sensing data into understandable information and perform packet conversion as a border router for seamless connection between a low-power wireless personal area network (6LoWPAN) and the Internet (IPv6). Implementation and laboratory test results verify the feasibility of the smart CoAP gateway which especially can provide about 97.20% data throughput.

• The KIPS Transactions:PartC
• /
• v.10C no.2
• /
• pp.209-216
• /
• 2003

As the interest in the wireless internet services is increasing recently, the related technology development is in active progress. According to WAP (Wireless Application Protocol) specification which is currently considered as one of the most powerful international standardizations, mobile terminal and WAP server are supposed to communicate through WAP Gateway. This paper is about the design and implementation of IWAP platform where WAP Gateway and Server are integrated and supported based on Linux. The proposed WAP platform broadly consists of four modules like WAP Gateway, JAVA based Server development environment, WML Tool-Kit, and MUL (Management User Interface) and for bearer network, SMSC (Short Message Service Center) and CSD (Circuit Switched Data) router are considered.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.11 no.3
• /
• pp.99-105
• /
• 2011

Typically, quick and easily deployed communication for a clear disaster management is required in a disaster situation. But it is not easy because lack of backbone network and poor conditions of disaster site. it is possible to obtain a wide service coverage and low power with portable wireless mesh network technology. In this paper, we developed portable wireless mesh network gateway with a network processor and evaluate it's performance including throughput, latency delay, packet loss, etc. The experiments show our wireless mesh network gateway has basic performance and can be used in various environments like disaster site.

• The Journal of Korea Institute of Information, Electronics, and Communication Technology
• /
• v.9 no.6
• /
• pp.617-623
• /
• 2016

Recently, IoT technology has been applied to the control of appliances in the home, and information about temperature, humidity, etc. is collected and the application of the system to control the indoor environment automatically is increasing. Currently, the network configuration of IoT devices is mainly used to connect IoT devices to the Internet through wireless gateways. Since such a method is dependent on a gateway, there are limitations in providing various services. Therefore, this paper proposes an independent method of gateway by using IoT network without using gateway by applying long distance wireless communication technology. IoT devices using the proposed long distance wireless internet technology can connect to a remote server and provide mobility that can not be supported by existing methods, thereby providing more various services. The performance evaluation of the proposed network configuration method is compared with the delay time and the amount of data generated in the existing network method constituted by the gateway and the proposed network configuration method respectively. Experimental results show that the proposed method decreases the delay time and the amount of data generated by the gateway.