• Journal of the Institute of Electronics Engineers of Korea TC
• /
• v.44 no.10
• /
• pp.110-118
• /
• 2007

In multi-hop wireless network, multi-channel makes it possible to enhance network performance because it reduces channel interferences md contentions. Recently several schemes have been proposed in the literatures to use multi-channel. Especially, MCR(Multi channel routing protocol), which utilize hybrid interface assignment, is a prominent routing protocol. MCR uses simple way to change channel but efficiently reduce channel interferences. In this paper, we propose a load-aware channel selection algorithm called LCS that enhances the channel switching algerian used in MCR protocol. In LCS, channel of a node is assigned based on collected information about queue length of neighbors. Moreover this paper evaluates the performance of in by using simulation test and testbed demonstration. Test results show that the MCR with LCS outperforms the naive MCR.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.30 no.5C
• /
• pp.355-363
• /
• 2005

This paper is discussed about the technology of the performance enhancement in the wireless communication between indoor and outdoor environments. In the outdoor wireless communication, the signal has mainly a severe degradation by the fading effect of channel, but that problem may be overcome by using ordinary multiple antenna technology and array signal processing algorithm. Hence, since the channel has the characteristics of both fading and angle spread in the wireless communication between indoor and outdoor, the ordinary technology cannot solve the signal degradation due to the angle spread. In order to solve the problem, in this paper, the characteristic of the wireless channel between indoor and outdoor is first analyzed and considered the channel models fit to that case. We propose the new multiple antenna algorithm by use of mean steering vector concept, and obtained the results of the performance enhancement. With the results of the performance analyses through of the numerical study and computer simulation, we show that the proposed algorithm has more enhanced signal to noise ratio than the previous algorithm.

• Journal of Korea Society of Digital Industry and Information Management
• /
• v.10 no.4
• /
• pp.109-116
• /
• 2014

In recent, ISM (Industrial Scientific Medical) band that is 2.4GHz band authorized free of charge is being widely used for smart phone, notebook computer, printer and portable multimedia devices. Accordingly, studies have been continuously conducted on the possibility of coexistence among nodes using ISM band. In particular, the interference of IEEE 802.11b based Wi-Fi device using overlapping channel during communication among IEEE 802.15.4 based wireless sensor nodes suitable for low-power, low-speed communication using ISM band causes serious network performance deterioration of wireless sensor networks. This paper examined a method of identifying channel status to avoid interference among wireless communication devices using IEEE 802.11b (Wi-Fi) and other ISM bands during communication among IEEE 802.15.4 based wireless sensor network nodes in ISM band. To identify channels occupied by Wi-Fi traffic, various studies are being conducted that use the RSSI (Received Signal Strength Indicator) value of interference signal obtained through ED (Energy Detection) feature that is one of IEEE 802.15.4 transmitter characteristics. This paper examines an algorithm that identifies the possibility of using more accurate channel by mixing utilization of interference signal and RSSI mean value of interference signal by wireless sensor network nodes. In addition, it verifies such algorithm by using OPNET Network verification simulator.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.14 no.10
• /
• pp.2215-2222
• /
• 2010

A Wireless Access for Vehicular Environment (WAVE) system based on Orthogonal Frequency Division Multiplexing (OFDM) is made for vehicle to vehicle wireless communications. The physical layer standard of the WAVE system is very similar to that of the IEEE802.11a wireless local area network (WLAN). Therefore, the performance of the WAVE system is degraded by continual channel variation in the WAVE multipath fading channels after starting initial channel estimation. In this paper, we research the performance improvement of equalization in 64 Quadrature Amplitude Modulation (QAM) transmission in WAVE environment. The proposed algorithms use the training sequence and the midamble sequence which is used for fast channel variation such as WAVE environments. Additionally, various interpolation methods are also used for the channel tracking.

• Journal of the Institute of Electronics Engineers of Korea TC
• /
• v.42 no.2 s.332
• /
• pp.23-38
• /
• 2005

The state of channel between two or more wireless terminals is changed frequently due to noise or multiple environmental conditions in wireless network. In this paper, we analyze packet transmission time and queue length in a time-varying channel of packet based Wireless Networks. To reflect the feature of the time-varying channel, we model the channel as two-state Markov model and three-state Markov model Which are transformed to SFG(Signal Flow Graph) model, and then the distribution of the packet transmission can be modeled as Gaussian distribution. If the packet is arrived with Poisson distribution, then the packet transmission system is modeled as M/G/1. The average transmission time and the average queue length are analyzed in the time-varying channel, and are verified with some simulations.

• Journal of Digital Contents Society
• /
• v.8 no.4
• /
• pp.491-497
• /
• 2007

RPersonal area networking technology is becoming increasingly important in enabling useful wireless home applications. For example, Bluetooth and IEEE 802.11b standards are the most commonly deployed technologies for wireless home applications. However, because both standards share the same unlicensed ISM (Industrial, Scientific, Medical) radio spectrum, severe interference is inevitable and performance can be impaired significantly when heterogeneous devices using the two technologies come into close proximity. In this paper, we research Gaussian FSK Bluetooth system, which is an open specification technology for short-range wireless connectivity between electronic devices. In this paper, we analyzes the effects of co-channel interference on the performance of a Gaussian FSK Bluetooth system. Performance criteria used in the study are the signal to interference power ratio (SIR), interference index, and the bit error rate (BER) in the wireless channel. The effect of co-channel interference from various sources on the performance of a Gaussian FSK Bluetooth system is analyzed using an IGA(Impulsive Gaussian Approximation) method, and these quantities are plotted against Eb/No, $\rho$ and SIR for various channel conditions in figures.

• ETRI Journal
• /
• v.36 no.1
• /
• pp.183-186
• /
• 2014

In this letter, we consider a cooperation system with multiple untrusted relays (URs). To keep the transmitted information confidential, we obtain joint channel characteristics (JCCs) through combining the channels from the source to the destination. Then, in the null space of the JCCs, jammers construct artificial noise to confuse URs when the source node broadcasts its data. Through a distributed implementation algorithm, the weight of each node can be obtained from its own channel state information. Simulation results show that high-level security of the system can be achieved when internal and external eavesdroppers coexist.

• International Journal of Contents
• /
• v.12 no.1
• /
• pp.65-69
• /
• 2016

Wireless communication chipsets have fixed transmission rate and communication distance. Although there are many kinds of chipsets with throughput and distance purpose, they cannot support various types of wireless applications. This paper provides theoretic research results in order to support various wireless applications requiring different throughput, delayed quality-of-service (QoS), and different communication distances by using a wireless communication chipset with fixed rate and transmission power. As a performance metric, the probability for a data frame that successfully receives at a desired receiver is adopted. Based on this probability, the average number of transmission in order to make a successful frame transmission is derived. Equations are utilized to analyze the performance of a single-hop with channel coding and a dual-hop without error correction matter transmission system. Our results revealed that single-hop transmission assisted by channel coding could extend its communication distance. However, communication range extending effect of the single-hop system was limited. Accordingly, dual-hop transmission is needed to overcome the communication distance limit of a chipset.

• Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.21 no.4
• /
• pp.104-114
• /
• 2007

In this paper, an Ad-hoc Routing Protocol that works in wireless Ad-hoc communication networks with multiple radios and multiple channels and that controls call admission based on bandwidth measurement is proposed. Unlike the conventional Ad-hoc node with a single radio using a single channel, an Ad-hoc node of the protocol proposed, the MCQosR(Multiple Channel Quality of Service Routing), has multiple radios and uses multiple channels, which allows full duplex transmission between wireless Ad-hoc nodes, and reduces intra interference on the route. Also, a fixed channel only for reception at each node enables the estimation of the available bandwidth, which is used to control the call admission for QoS provision. The performance of the MCQosR was verified by simulation.

• Journal of information and communication convergence engineering
• /
• v.2 no.3
• /
• pp.139-144
• /
• 2004

In order to transmit various types of multimedia data (i.e. voice, video, and data) over a wireless channel, the coding and modulation scheme needs to be flexible and capable of providing a variable quality of service, data rates, and latency. In this paper, we study a mobile multimedia COMA network combined with the concatenated Reed-Solomon/Rate Compatible Punctured Convolution code (RS/RCPC). Also, this paper propose the combination of concatenated RS/RCPC coder and COMA RAKE receiver for multimedia COMA traffic which can be sent over wireless channels. From the results, using a frequency selective Rayleigh fading channel model, it is shown that concatenated RS/RCPC coder at the wireless physical layer can be effective in providing reliable wireless multimedia CDMA network. And the proposed scheme that combine concatenated RS/RCPC coder and CDMA RAKE receiver provides a significant gain in the BER performance over multi-user interference and multipath frequency selective fading channels.