• Proceedings of the Korea Society of Information Technology Applications Conference
• /
• 2005.11a
• /
• pp.81-84
• /
• 2005

Various design schemes for network using wireless sensor nodes have been widely studied on the several application areas ranging from the real world information collection to environmental monitor. Currently, the schemes are focused on the design of sensor network for low power consumption, power-aware routing protocol, micro miniature operating system and sensor network middleware. The indoor localization system that identifies the location of the distributed nodes in a wireless sensor network requires features dealing with mobility, plurality and other environmental constraints of a sensor node. In this paper, we present an efficient location system to cope with mobility of multiple mobile nodes by designing a location handler that processes location information selectively depending on the nodes' density in a specific region. In order to resolve plurality of multiple mobile nodes, a routing method for the location system is also proposed to avoid the occurrence of overlapped location data.

• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.63 no.2
• /
• pp.306-312
• /
• 2014

The ZigBee communication method, which is the most frequently applied to the LED lighting control system, has drawbacks of low-speed and low-capacity, and the communication failure possibility due to environmental influences is on the rise. Therefore, it is important to secure the communication reliability by applying an integrated interface with a wire-wireless dual-network. This paper developed a communication module, which has a platform converging and combining the ZigBee of USN environments with the PLC of power line communication environments, to implement a dualized communication interface system supporting the wire-wireless integrated protocol, and implemented a wire-wireless networking device and a control system software technology. As a result, it was automatically switched into the PLC communication within 4.4 seconds on average when there was an access failure in the ZigBee communication network, so a reliable communication network was built.

• The Journal of the Korea Contents Association
• /
• v.1 no.1
• /
• pp.109-117
• /
• 2001

The WAP gateway. for wireless internet applications services, is a software that is placed between the user terminals(PDA, mobile phones) and the WAP/Web server. H is a middleware system that converts the protocol of a packet network to the protocol on the WAP network, and supports the encoding of WML documents. In this paper, we designed and implemented the WAP gateway based on the WAP specification version 1.2 announced by the WAP forum. It provides cross-platform compatibility by being implemented by the Java language. Compared with a Kannel system using a Nokia tool kit version 1.2, it provides a more excellent performance and a stability.

• Journal of Institute of Control, Robotics and Systems
• /
• v.19 no.7
• /
• pp.633-639
• /
• 2013

Several estimation methods used in the range measurement based wireless localization area have individual problems. These problems may not occur according to certain application areas. However, these problems may give rise to serious problems in particular applications. In this paper, three methods, ILS (Iterative Least Squares), DS (Direct Solution), and DSRM (Difference of Squared Range Measurements) methods are considered. Problems that can occur in these methods are defined and a simple hybrid solution is presented to solve them. The ILS method is the most frequently used method in wireless localization and has local minimum problems and a large computational burden compared with closed-form solutions. The DS method requires less processing time than the ILS method. However, a solution for this method may include a complex number caused by the relations between the location of reference nodes and range measurement errors. In the near-field region of the complex solution, large estimation errors occur. In the DSRM method, large measurement errors occur when the mobile node is far from the reference nodes due to the combination of range measurement error and range data. This creates the problem of large localization errors. In this paper, these problems are defined and a hybrid localization method is presented to avoid them by integrating the DS and DSRM methods. The defined problems are confirmed and the performance of the presented method is verified by a Monte-Carlo simulation.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.16 no.2 s.93
• /
• pp.144-148
• /
• 2005

In this paper, we have proposed VGA fur MB-OFDM UWB application using $CMOS\;0.18\;{\mu}m$ technique. The proposed VGA can vary power gain from 45 dB to -6 dB and 3 dB band width is more than 264 MHz. It has 3-stage cascade structure and DC offset cancellation. It consumes less, than 4 mA for 1.8 V bias voltage.

• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.61 no.3
• /
• pp.437-441
• /
• 2012

In this paper, we have designed and manufactured 10MHz power source for the application of short distance wireless power transmission. The designed power source consists of a DDS(direct digital synthesizer) signal generator, a buffer driver and a balanced power amplifier. Short range wireless power transmission is usually carried out by near-field inductive coupling between source and load. The distance variation between source and load gives rise to the change of load impedance of power amplifier, which has effect on the operation of power amplifier. To overcome this problem due to load variation of power amplifier, we have adopted the balanced power amplifier using the quadrature hybrid implemented by lumped capacitors and a mutually coupled coil. The experiment results show the above 40dBm output power, frequency range of 9 to 11MHz, and total DC power consumption of 36W.

• Journal of Communications and Networks
• /
• v.18 no.6
• /
• pp.926-937
• /
• 2016

In this paper, we study the feasibility of receiver diversity for application to downlink cellular networks, where low-energy devices are equipped with information decoding and energy harvesting receivers for simultaneous wireless information and power transfer. We compare several options that are based on selection combining and maximum ratio combining, which provide different implementation complexities. By capitalizing on the Frechet inequality, we shed light on the advantages and limitations of each scheme as a function of the transmission rate and harvested power that need to be fulfilled at the low-energy devices. Our analysis shows that no scheme outperforms the others for every system setup. It suggests, on the other hand, that the low-energy devices need to operate in an adaptive fashion, by choosing the receiver diversity scheme as a function of the imposed requirements. With the aid of stochastic geometry, we introduce mathematical frameworks for system-level analysis. We show that they constitute an important tool for system-level optimization and, in particular, for identifying the diversity scheme that optimizes wireless information and power transmission as a function of a sensible set of parameters. Monte Carlo simulations are used to validate our findings and to illustrate the trade-off that emerge in cellular networks with simultaneous wireless information and power transfer.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• v.10 no.4
• /
• pp.1555-1570
• /
• 2016

For monitoring forest fires, a real-time system to prevent fires in wider areas should be supported consistently. However, there has still been a lack of the support for real-time system related to forest fire monitoring. In addition, the 'real-time' processing in a forest fire detection system can lead to excessive consumption of energy. To solve these problems, the intelligent data acquisition of sensing nodes is required, and the maximum energy savings as well as rapid and accurate detection by flame sensors need to be done. In this regard, this paper proposes a node built-in filter algorithm for intelligent data collection of sensing nodes for the rapid detection of forest fires with focus on reducing the power consumption of the remote sensing nodes and providing efficient wireless sensor network-based forest environment monitoring in terms of data transmission, network stability and data acquisition. The experimental result showed that battery life can be extended through the intelligent sampling of remote sensing nodes, and the average accuracy of the measurement of flame detection based on the distance is 44%.

• Journal of Korea Game Society
• /
• v.6 no.1
• /
• pp.21-28
• /
• 2006

This study focused on design and implementation of Mobile 3D Bluetooth Engine based on OpenGL-ES. In Mobile 3D network game so far, there is a form the mainstream of wireless internet game using WAP and VM. But, VM game are popular because of an excessive communication expense problem for this mobile network game that occur when connect to wireless internet as point out to problem by it, that is, stand-alone game are very popular. This study introduce a mobile 3D Bluetooth Engine which is based on mobile 3D standard using OpenGL-ES to solve a mobile network game generally that occurs when connect to take pleasure a wireless internet from some people into a short distance.

• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.62 no.6
• /
• pp.762-766
• /
• 2013

Interest in Wireless Power Transmission (WPT) technology has been increasing worldwide recently. This trend is proved by commercialized products such as electric toothbrush, wireless razor, and wireless charger for mobile phone battery. Studies for enhancing the applicability of the technology have been continuously conducted. Currently the WPT technology is based on the technologies using microwave, inductively coupling, and magnetic resonance. In the meantime, development of the microwave-based WPT faces difficulty due to health hazards involved in the technology, and application of the WPT technology using inductively coupling is restricted by area due to the problem of transmission length. In comparison, the WPT technology using magnetic resonance draws attention in terms of efficiency and transmission length. In this study, the sending coil based on the WPT technology using magnetic resonance system was replaced with an HTS coil to enhance transmission efficiency. Since the HTS coil has a zero resistance, power transmission loss can be minimized. At the same time, size of the current density could be increased to 100 times or more than typical coils. In addition, through impedance matching of LC device, maximal resonance properties were induced and consequently, frequency selection quality characteristics or Q was enhanced. As a result, the WPT type using the HTS coil showed a longer transmission length and better transmission efficiency compared with the WPT type using typical coils.