• Korean Journal of Agricultural Science
• /
• v.40 no.4
• /
• pp.395-403
• /
• 2013

Plant factory has drawn attention in many countries in the world due to capability of environmental control not only for better yield and quality, but also for increase in functional and medicinal components of the products. In this paper, an experimental plant factory was constructed for various tests under different environmental conditions, and the operations were evaluated. A production room was constructed with adiabatic materials with dimensions of $6,900{\times}3,000{\times}2,500$ mm ($L{\times}W{\times}H$). Four sets of $2,890{\times}600{\times}2,320$ mm ($L{\times}W{\times}H$) production frame unit, each with 9 light-installed beds and an aeroponic fertigation system, resulting in 36 beds, were prepared. Accuracy and response were evaluated for each environmental control component with and without crops. Air temperature, humidity, $CO_2$ concentration, light intensity, frequency, and duty ratio, fertigation rate and scheduling were controllable from a main control computer through wireless communication devices. When the plant factory was operated without crop condition, the response times were 8 minutes for change in temperature from 20 to $15^{\circ}C$ and 20 minutes from 15 to $20^{\circ}C$; 7 minutes for change in humidity from 40 to 65%; and 4 minutes for change in $CO_2$ concentration from 450 to 1000 ppm. When operated for 24 hours with crop cultivation; average, maximum, and minimum values of temperatures were 20.06, 20.8, and $18.8^{\circ}C$; humidity were 66.72, 69.37, and 63.73%; $CO_2$ concentrations were 1017, 1168, and 911 ppm, respectively. Photosynthetic Photon Flux Density was increased as the distance from the light source decreased, but variability was greater at shorter distances. Results of the study would provide useful information for efficient application of the plant factory and to investigate the optimum environment for crop growth through various experiments.

• Journal of Internet Computing and Services
• /
• v.5 no.3
• /
• pp.63-72
• /
• 2004

Recently the range of mobile phone's usage has become more widely since phone has the function of data communication and voice communication. In addition, the request of users who wish to represent their identity on their mobile phones by storing some kinds of multimedia data such as images and melody has increased. There are two different methods for downloading the multimedia data; one method accesses a wireless internet server to download the data and another method downloads the data from PC directly. While the first one requires extra fee for downloading the data, the second method has weakness to modify the original data and it cannot be used in GSM phone yet since it is developed for CDMA phone. In this paper, we introduce a PC-based download application system that enables the users to download multimedia data from PC to GSM phone very easily.

• Journal of Internet Computing and Services
• /
• v.18 no.1
• /
• pp.153-160
• /
• 2017

Due to the endeavors and performances of many IT firms, as well as the government supports, the IT capability of Korea was ranked in the top 8th position by Huawei in 2015. Specifically, as far as the wire & wireless network and Internet speed, Korea has taken pride in possessing the competitive advantage. However, many academic and practical experts began to point out the lack of systematic research management on Internet. The purpose of the study is to identify various research issues on Internet and to verify their appropriateness. In addition, the study examined their recent trends and provided the prospect of the future Internet-related researches. Consequently, the finding indicates that the rigorous endeavors and outcomes for each proposed research issue have been resulted in and will be continued. The study anticipates the growing demands of researches in the fields of future network, multimedia application, big data, artificial intelligence, and Internet security.

• Journal of the Institute of Electronics Engineers of Korea TC
• /
• v.48 no.10
• /
• pp.35-42
• /
• 2011

WPAN(Wireless Personal Area Network) have many advantages such as using low power and cheap price, small size. So it is recently increasing application range such as personal portable device, home network and sensor network so and on. IEEE 802.15.3 basically has the point to point or peer to peer UM(Usage Model). But using devises that need data transmission is increasing in the house and office. Therefor UM of point to multipoint is proposed. In this paper, I proposed Multicast ACK mechanism on the point to multipoint UM. So it is able to transfer data to multiple devices as this Multicast transfer method at a time. Thus, throughput performance is improved. But the problem that increases data transfer delay is appeared because of adding Multicast ACK traffic. We compared the performance between standard and proposed mechanism through a numerical analysis.

• Convergence Security Journal
• /
• v.13 no.3
• /
• pp.33-38
• /
• 2013

Security between mobile nodes and efficient communication is one of the most important parts of the MANET. In particular, the wireless network is significantly higher for the attack threats because of collaborative structure for open communication media and communication. However, application of existing security mechanisms and intrusion detection system is not easy due to the characteristics of MANET. It is because collection and integration of adult data by the dynamic topology due to the mobility of nodes and many network sensors is difficult. In this study, we propose cooperative security system technique that can improve the reliability based on authentication assessing confidence about the whole nodes which joins to network and detect effectively this when intrusion occurs. Cluster head which manages the cluster performs CA role for the certificate issue and the gateway node performs role of intrusion detection system. Intrusion detection is performed by cooperating with neighboring nodes when attack is not detected in one intrusion detection node. The performance of the proposed method was confirmed through experiments comparing with the SRP technique.

• Proceedings of the KIEE Conference
• /
• 2007.04a
• /
• pp.377-379
• /
• 2007

To reduce the chattering errors of reed switch sensors used for automatic remote measurement of water supply system, a reed switch sensor was analyzed and improved. The operation of reed switch sensors can be described as a mechanical contact by approximation of permanent magnet piece to generate an electrical pulse. The reed switch sensors are used in measurement application by detecting the rotational or translational displacement. To apply for flow measurement devices, the reed switch sensors should keep high reliability. They are applied for the electronic digital type of water flow meters. The reed switch sensor is just installed simply on the mechanical type flow meter. A small magnet is attached on a pointer of the water meter counter rotor. Inside the reed sensor, two steel leaf springs make mechanical contact and apart as rotation of flow meter counter. The counting electrical contact pulses can be converted as the water flow amount. The MCU sends the digital flow rate data to the server using the wireless communication network. But it occurs data difference or errors by chattering noise. The reed switch sensor contains chattering error by it self at the force equivalent position. The vibrations such as passing car near to the switch sensor installed location. In order to reduce chattering error, most system uses just software methods for example using filter and also statistical calibration methods. The chattering errors were reduced by changing leaf spring structure using mechanical hysteresis characteristics.

• Journal of Korean Tunnelling and Underground Space Association
• /
• v.7 no.1
• /
• pp.89-96
• /
• 2005

Due to fast development of digital equipments, various information techniques have been applied to the tunneling and a decision aid system based on IT has also been used during excavation stage. A PDA based informative tunneling method is, therefore, studied in this paper and the decision aids for tunneling using digital face mapping data as well as geologic information in terms of digital data is developed. For this, wireless network, mobile computer, CDMA and digital camera have been combined to generate the digital map of the tunnel face and reinforcement or excavation pattern can be estimated based on digitalized geologic conditions. Future studies will be concentrated on the enhancement of the PDA S/W so that reinforcement method as well as the amount of reinforcements can also be stored in the same DB. Furthermore, field application of the S/W will be undertaken and a virtual reality technique will also be introduced to visualize all the tunneling work on the computer monitor.

• The Journal of the Korea Contents Association
• /
• v.16 no.1
• /
• pp.362-369
• /
• 2016

Recently, Last to check the security status of various medium and large bridge structures using various kinds of measurement equipment, but most of the methods are used to measure and check the displacement behavior of the bridge by a certain period. In this study, receive GPS satellite signals that can be observed in real time the whole region, a bridge to automatically measure the displacement and behavior characteristics of the structure in real-time in mm over the 24 hours, the measurement information and transmits the data to the wireless network, by making use, it was applied to the real-time monitoring system in connection with a bridge to be able to automatically notify GNSS fine displacement behavior. In fact, analysis and receives the measurement data to GNSS provided in the upper bridge of the middle and large-sized aging for this purpose, measuring USN and at the same time is converted into a three-dimensional position information of a test study was conducted to monitor the bridge displacement in real time. As a result, a vertical displacement of about 0.027~0.037m at the measurement time of day of the measurement point is that the repeated and confirmed.

• Journal of Advanced Navigation Technology
• /
• v.15 no.4
• /
• pp.585-590
• /
• 2011

In the past few years, M2M (Machine-to-Machine) applications have become a hot topic in the wireless industry. While M2M applications can be used for many purposes (smart homes, smart metering/electricity meter reading, fleet management, mobile workforce, automobile insurance, vending machines, etc), and in many sectors (healthcare, agriculture, commercial, industrial, retail, utility, etc.), smart metering applications or smart grids present the biggest growth potential in the M2M market today. M2M platform is the future ubiquitous network technologies which provide the integrated service with the networks and devices. The promising technologies to tackle these problems are the Semantic technologies, for interoperability, and the Agent technologies for management of complex systems. In this paper the information communication technique based on the disaster prevention system's for the M2M, concepts and its requirement technology and application are studied.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.5 no.5
• /
• pp.1011-1016
• /
• 2001

In this paper, a narrow-band bandpass filter using microstrip open-loop resonators with coupled and crossing lines is designed and fabricated. This filter has many advantages such as compact in size, low weight and the characteristic of the elliptic-function narrow-band bandpass filtering. The configuration consists of two identical microstrip open loop resonators, coupled line and crossing line. By using open loop resonators, the size of the filter can be reduced about 50% compared with the ring resonators. A crossing line gives two notchs in the stopband, which have sharp selectivity in the passband. Centered at 2.455GHz, the calculated microstrip bandpass filter shows a bandwidth of 1.22%, which makes it very attractive for application in the wireless LAN. The filter is fabricated by photo-etching process. The fabricated bandpass filter shows that the bandwidth is 0.85% for 2.458GHz and the size is only $2.6cm\times1cm$.