Currently, as a consequence of PACS (Picture Archiving Communication System) implementation many hospitals are replacing conventional film-type interpretations of diagnostic medical images with new digital-format interpretations that can also be saved, and retrieve However, the big limitation in PACS is considered to be the lack of mobility. The purpose of this study is to determine the optimal communication packet size. This was done by considering the terms occurred in the wireless communication. After encoding medical image using JPGE2000 image compression method, This method embodied auto-error correction technique preventing the loss of packets occurred during wireless communication. A PC class server, with capabilities to load, collect data, save images, and connect with other network, was installed. Image data were compressed using JPEG2000 algorithm which supports the capability of high energy density and compression ratio, to communicate through a wireless network. Image data were also transmitted in block units coeded by JPEG2000 to prevent the loss of the packets in a wireless network. When JPGE2000 image data were decoded in a PUA (Personal Digital Assistant), it was instantaneous for a MR (Magnetic Resonance) head image of 256${\times}$256 pixels, while it took approximately 5 seconds to decode a CR (Computed Radiography) chest image of 800${\times}$790 pixels. In the transmission of the image data using a CDMA 1X module (Code-Division Multiple Access 1st Generation), 256 byte/sec was considered a stable transmission rate, but packets were lost in the intervals at the transmission rate of 1Kbyte/sec. However, even with a transmission rate above 1 Kbyte/sec, packets were not lost in wireless LAN. Current PACS are not compatible with wireless networks. because it does not have an interface between wired and wireless. Thus, the mobile JPEG2000 image viewing system was developed in order to complement mobility-a limitation in PACS. Moreover, the weak-connections of the wireless network was enhanced by re-transmitting image data within a limitations The results of this study are expected to play an interface role between the current wired-networks PACS and the mobile devices.
We propose a mobile point-of-sale system, which consists of only mobile information terminals and personal computers. The proposed system provides most of functionalities related with resource planning, adminstration and management, provided by medium-scale or large-scale POS systems, with additional functionalities, such as automatic information gathering and management through mobile interconnection, while eliminating the necessity of additional special-purpose devices, such as bar-code systems. The proposed system transmits order information through wireless and wired communication lines, thus allowing real-time sharing of order information among diverse information devices, such as mobile order receiving terminals, main server within stores, monitors and printers located in production lines. Also, the system is able to transfer such detail information produced within stores in real-time to the enterprise-level accounting, sales, logistics, personnel management system, which facilitate enterprise-wide management and administrative decision-making. No additional programs are required for mobile terminals. Order information received by such terminals are entered into databases through web server of main server and that information is again transferred to main server and production line printers. The proposed system can handle all the point-of-sale information and can provide almost of the POS functionalities by simply utilizing wireless internet, personal computers, and mobile terminals without installing specific-purpose peripheral devices. The proposed system can be widely applied to the small-scale stores and will contribute in reducing construction and maintenance cost required for point-of-sale management.
The Journal of the Institute of Internet, Broadcasting and Communication
/
v.9
no.5
/
pp.183-189
/
2009
Recently, PCS, PDA and mobile devices, such as the proliferation of spread, GPS (Global Positioning System) the use of, the rapid development of wireless network and a regular user even images, audio, video, multimedia data, such as increased use is for. In particular, video data among multimedia data, unlike the moving object, text or image data that contains information about the movements and changes in the space of time, depending on the kinds of changes that have sigongganjeok attributes. Spatial location of objects on the flow of time, changing according to the moving object (Moving Object) of the continuous movement trajectory of the meeting is called, from the user from the database that contains a given query trajectory and data trajectory similar to the finding of similar trajectory Search (Similar Sub-trajectory Retrieval) is called. To search for the trajectory, and these variations, and given the similar trajectory of the user query (Tolerance) in the search for a similar trajectory to approximate data matching (Approximate Matching) should be available. In addition, a large multimedia data from the database that you only want to be able to find a faster time-effective ways to search different from the existing research is required. To this end, in this paper effectively divided into a grid to search for the trajectory to the trajectory of moving objects, similar to the effective support of the search trajectory offers a new grid-based search techniques.
This study is based on providing core infrastructure to make or extend an ERP strategy to make the proper model to cope effectively with various customer requirements and market changes through ERP improvement. The purpose of this study is to support making a competitive advantage by raising productivity and reducing costs as a result of making and applying the "mobile real time connection to ERP"model which is accessible anywhere and anytime using PDA and wireless LAN on the basis of mobile business concept. The model is implemented as the "mobile Material Management System" on the area of material management of ERP in the enterprise which already implemented ERP system. This model is also applied into other divisions of the enterprise. This case study shows that the proper application of ERP reduces costs by reducing business process lead time, increase productivity and customer satisfaction through mobility and instant connectivity and easiness of the system. It is recommended to apply this model into the ERP system which is used in most enterprise, to make a competitive advantage. To sum up, the model in this study can be applied into the enterprise which wants to reduce costs, increase productivity and customer satisfaction through ERP improvement.
In this paper we propose wear-UCAM, which is a toolkit for context-aware application model in wearable computing. As the rapid developments of mobile technologies and relevant technologies, the interests in wearable computer also become indispensible in both academic and industrial fields. However, there are few research activities on the application framework or toolkit for wearable computing. Hence, we suggest wear-UCAM as the development toolkit for wearable computing applications, where we focus on how to collect relevant user context, manage it, and provide services based on the recognized context. The proposed wear-UCAM includes the abstraction of context processing as well as independence among sensors and services with other components. For the sake of rapid prototyping of the proposed toolkit, we utilize PDA with wireless LAN as a wearable computer. The detail explanation of the implementation and its discussion are presented in this paper.
According to the growth of communication biz, embedded market rapidly developing in domestic and overseas. Embedded system can be used in various way such as wire and wireless communication equipment or information products. There are lots of developing performance applying speech recognition to embedded system, for instance, PDA, PCS, CDMA-2000 or IMT-2000. This study implement minimum memory of speech recognition engine and DB for apply real time embedded system. The implement measure of speech recognition equipment to fit on embedded system is like following. At first, DC element is removed from Input voice and then a compensation of high frequency was achieved by pre-emphasis with coefficients value, 0.97 and constitute division data as same size as 256 sample by lapped shift method. Through by Levinson - Durbin Algorithm, these data can get linear predictive coefficient and again, using Cepstrum - Transformer attain feature vectors. During HMM training, We used Baum-Welch reestimation Algorithm for each words training and can get the recognition result from executed likelihood method on each words. The used speech data is using 40 speech command data and 10 digits extracted form each 15 of male and female speaker spoken menu control command of Embedded system. Since, in many times, ARM CPU is adopted in embedded system, it's peformed porting the speech recognition engine on ARM core evaluation board. And do the recognition test with select set 1 and set 3 parameter that has good recognition rate on commander and no digit after the several tests using by 5 proposal recognition parameter sets. The recognition engine of recognition rate shows 95%, speech commander recognizer shows 96% and digits recognizer shows 94%.
As the demand of employing various PC software on mobile embedded devices which have limited storages has been increased, software streaming services are needed. However it takes too much time to launch software on them because it is transferred through wireless networks. To address this problem, prefetch algorithms are needed. We examined 'Last successor (LS)' algorithm and PPM-based prefetch algorithm as prefetch algorithms for software streaming services. We present 'Probability-base Multi Successor (PMS)' algorithm which is contrived through analyzing evaluations of previous algorithms and characteristics of software streaming services. While LS has one successor per each block, PMS has N successors based on probability which is calculated by PPM-based prefetch algorithm. The hit rate of PMS is similar to that of PPM-base prefetch algorithm and the space overhead is similar to that of LS. We can get good efficiency at the point of memory usage when PMS is applied to software streaming services.
With an explosive growth of internet and a change of consumer's demand, Post PC is emerging as a substitute for the existing desktop computer and laptop computer. Post PC is a new computer which is portable with wireless networking, cheaper than the existing PCs and specialized in the specific function that consumers want. Furthermore, the shape and the ability of Post PC are dependent on its specific function. The rudimentary Post PCs such as PDA, web-pad and smart-phone are already usable. And in the future, owing to the progress of technologies, the heterogeneity of relate companies and the low entry barrier, various Post PCs will be developed. In this paper, we analyze consumers' willingness-to-pay for Post PC with the attributes such as the portability, the speed of CPU, the data input method (using key board, or notepad etc), the size of monitor and price. To estimating consumers' willingness-to-pay for the attributes of Post PC, we apply a contingent ranking method, which makes the respondents rank hypothetical Post the portability, the speed of CPU, the data input method (using key board, or notepad etc),the size of monitor and price. To estimating consumers' willingness-to-pay for the attributes of Post PC, we apply a contingent ranking method, which makes the respondents rank hypothetical Post PC alternatives featuring various combinations of attributes, to a survey data collected in Korea. Using the estimated willingness-to-pay, we predict the shape and the ability of future's Post PC and draw policy implications for the national and company level R&D strategies.
Proceedings of the Korea Contents Association Conference
/
2007.11a
/
pp.639-643
/
2007
The paper presents a framework for developing real-time multi-user board games and applications in augmented reality. Recently, increase the environment to playing game in augmented reality with advancement of computing ability improvement and wireless networking technique of mobile device. While the trend of utilizing this kind of games is creasing, the facts that there is a shortage of games whose contents are attractive to users. In this paper we propose a framework that enables game content developers to develop new game contents base on augmented reality easily and quickly. This framework is an automatic service that can augment in various methods by using the supported marker recognition service. Therefore game contents developers do not need to know about either augmented reality technique or the inner process structure. The framework also supports special functions and various interaction interfaces for augmented reality board game and components of the board game we can implement. These enable developers to accomplish all the necessary components and structures of the board game more easily.
With the advances of wireless technologies and mobile computing, m-commerce is being realized for several mobile devices such as PDAs and mobile phones. Currently, service contents in m-commerce are usually newly written to meet specific characteristics of the target mobile devices, thus requiring formidable efforts. Therefore, we should exploit the Internet product information currently being provided for e-commerce. However, bringing the Internet product to mobile devices is far from straightforward due to the many limitations of mobile devices such as little memory, small displays, low processing speeds, and so forth. In this paper, we first suggest a new model to effectively adapt the Internet product information for mobile phones. We then suggest a mobile system to implement the model. We then design and implement the system. Finally, we give experiments on the system.
본 웹사이트에 게시된 이메일 주소가 전자우편 수집 프로그램이나
그 밖의 기술적 장치를 이용하여 무단으로 수집되는 것을 거부하며,
이를 위반시 정보통신망법에 의해 형사 처벌됨을 유념하시기 바랍니다.
[게시일 2004년 10월 1일]
이용약관
제 1 장 총칙
제 1 조 (목적)
이 이용약관은 KoreaScience 홈페이지(이하 “당 사이트”)에서 제공하는 인터넷 서비스(이하 '서비스')의 가입조건 및 이용에 관한 제반 사항과 기타 필요한 사항을 구체적으로 규정함을 목적으로 합니다.
제 2 조 (용어의 정의)
① "이용자"라 함은 당 사이트에 접속하여 이 약관에 따라 당 사이트가 제공하는 서비스를 받는 회원 및 비회원을
말합니다.
② "회원"이라 함은 서비스를 이용하기 위하여 당 사이트에 개인정보를 제공하여 아이디(ID)와 비밀번호를 부여
받은 자를 말합니다.
③ "회원 아이디(ID)"라 함은 회원의 식별 및 서비스 이용을 위하여 자신이 선정한 문자 및 숫자의 조합을
말합니다.
④ "비밀번호(패스워드)"라 함은 회원이 자신의 비밀보호를 위하여 선정한 문자 및 숫자의 조합을 말합니다.
제 3 조 (이용약관의 효력 및 변경)
① 이 약관은 당 사이트에 게시하거나 기타의 방법으로 회원에게 공지함으로써 효력이 발생합니다.
② 당 사이트는 이 약관을 개정할 경우에 적용일자 및 개정사유를 명시하여 현행 약관과 함께 당 사이트의
초기화면에 그 적용일자 7일 이전부터 적용일자 전일까지 공지합니다. 다만, 회원에게 불리하게 약관내용을
변경하는 경우에는 최소한 30일 이상의 사전 유예기간을 두고 공지합니다. 이 경우 당 사이트는 개정 전
내용과 개정 후 내용을 명확하게 비교하여 이용자가 알기 쉽도록 표시합니다.
제 4 조(약관 외 준칙)
① 이 약관은 당 사이트가 제공하는 서비스에 관한 이용안내와 함께 적용됩니다.
② 이 약관에 명시되지 아니한 사항은 관계법령의 규정이 적용됩니다.
제 2 장 이용계약의 체결
제 5 조 (이용계약의 성립 등)
① 이용계약은 이용고객이 당 사이트가 정한 약관에 「동의합니다」를 선택하고, 당 사이트가 정한
온라인신청양식을 작성하여 서비스 이용을 신청한 후, 당 사이트가 이를 승낙함으로써 성립합니다.
② 제1항의 승낙은 당 사이트가 제공하는 과학기술정보검색, 맞춤정보, 서지정보 등 다른 서비스의 이용승낙을
포함합니다.
제 6 조 (회원가입)
서비스를 이용하고자 하는 고객은 당 사이트에서 정한 회원가입양식에 개인정보를 기재하여 가입을 하여야 합니다.
제 7 조 (개인정보의 보호 및 사용)
당 사이트는 관계법령이 정하는 바에 따라 회원 등록정보를 포함한 회원의 개인정보를 보호하기 위해 노력합니다. 회원 개인정보의 보호 및 사용에 대해서는 관련법령 및 당 사이트의 개인정보 보호정책이 적용됩니다.
제 8 조 (이용 신청의 승낙과 제한)
① 당 사이트는 제6조의 규정에 의한 이용신청고객에 대하여 서비스 이용을 승낙합니다.
② 당 사이트는 아래사항에 해당하는 경우에 대해서 승낙하지 아니 합니다.
- 이용계약 신청서의 내용을 허위로 기재한 경우
- 기타 규정한 제반사항을 위반하며 신청하는 경우
제 9 조 (회원 ID 부여 및 변경 등)
① 당 사이트는 이용고객에 대하여 약관에 정하는 바에 따라 자신이 선정한 회원 ID를 부여합니다.
② 회원 ID는 원칙적으로 변경이 불가하며 부득이한 사유로 인하여 변경 하고자 하는 경우에는 해당 ID를
해지하고 재가입해야 합니다.
③ 기타 회원 개인정보 관리 및 변경 등에 관한 사항은 서비스별 안내에 정하는 바에 의합니다.
제 3 장 계약 당사자의 의무
제 10 조 (KISTI의 의무)
① 당 사이트는 이용고객이 희망한 서비스 제공 개시일에 특별한 사정이 없는 한 서비스를 이용할 수 있도록
하여야 합니다.
② 당 사이트는 개인정보 보호를 위해 보안시스템을 구축하며 개인정보 보호정책을 공시하고 준수합니다.
③ 당 사이트는 회원으로부터 제기되는 의견이나 불만이 정당하다고 객관적으로 인정될 경우에는 적절한 절차를
거쳐 즉시 처리하여야 합니다. 다만, 즉시 처리가 곤란한 경우는 회원에게 그 사유와 처리일정을 통보하여야
합니다.
제 11 조 (회원의 의무)
① 이용자는 회원가입 신청 또는 회원정보 변경 시 실명으로 모든 사항을 사실에 근거하여 작성하여야 하며,
허위 또는 타인의 정보를 등록할 경우 일체의 권리를 주장할 수 없습니다.
② 당 사이트가 관계법령 및 개인정보 보호정책에 의거하여 그 책임을 지는 경우를 제외하고 회원에게 부여된
ID의 비밀번호 관리소홀, 부정사용에 의하여 발생하는 모든 결과에 대한 책임은 회원에게 있습니다.
③ 회원은 당 사이트 및 제 3자의 지적 재산권을 침해해서는 안 됩니다.
제 4 장 서비스의 이용
제 12 조 (서비스 이용 시간)
① 서비스 이용은 당 사이트의 업무상 또는 기술상 특별한 지장이 없는 한 연중무휴, 1일 24시간 운영을
원칙으로 합니다. 단, 당 사이트는 시스템 정기점검, 증설 및 교체를 위해 당 사이트가 정한 날이나 시간에
서비스를 일시 중단할 수 있으며, 예정되어 있는 작업으로 인한 서비스 일시중단은 당 사이트 홈페이지를
통해 사전에 공지합니다.
② 당 사이트는 서비스를 특정범위로 분할하여 각 범위별로 이용가능시간을 별도로 지정할 수 있습니다. 다만
이 경우 그 내용을 공지합니다.
제 13 조 (홈페이지 저작권)
① NDSL에서 제공하는 모든 저작물의 저작권은 원저작자에게 있으며, KISTI는 복제/배포/전송권을 확보하고
있습니다.
② NDSL에서 제공하는 콘텐츠를 상업적 및 기타 영리목적으로 복제/배포/전송할 경우 사전에 KISTI의 허락을
받아야 합니다.
③ NDSL에서 제공하는 콘텐츠를 보도, 비평, 교육, 연구 등을 위하여 정당한 범위 안에서 공정한 관행에
합치되게 인용할 수 있습니다.
④ NDSL에서 제공하는 콘텐츠를 무단 복제, 전송, 배포 기타 저작권법에 위반되는 방법으로 이용할 경우
저작권법 제136조에 따라 5년 이하의 징역 또는 5천만 원 이하의 벌금에 처해질 수 있습니다.
제 14 조 (유료서비스)
① 당 사이트 및 협력기관이 정한 유료서비스(원문복사 등)는 별도로 정해진 바에 따르며, 변경사항은 시행 전에
당 사이트 홈페이지를 통하여 회원에게 공지합니다.
② 유료서비스를 이용하려는 회원은 정해진 요금체계에 따라 요금을 납부해야 합니다.
제 5 장 계약 해지 및 이용 제한
제 15 조 (계약 해지)
회원이 이용계약을 해지하고자 하는 때에는 [가입해지] 메뉴를 이용해 직접 해지해야 합니다.
제 16 조 (서비스 이용제한)
① 당 사이트는 회원이 서비스 이용내용에 있어서 본 약관 제 11조 내용을 위반하거나, 다음 각 호에 해당하는
경우 서비스 이용을 제한할 수 있습니다.
- 2년 이상 서비스를 이용한 적이 없는 경우
- 기타 정상적인 서비스 운영에 방해가 될 경우
② 상기 이용제한 규정에 따라 서비스를 이용하는 회원에게 서비스 이용에 대하여 별도 공지 없이 서비스 이용의
일시정지, 이용계약 해지 할 수 있습니다.
제 17 조 (전자우편주소 수집 금지)
회원은 전자우편주소 추출기 등을 이용하여 전자우편주소를 수집 또는 제3자에게 제공할 수 없습니다.
제 6 장 손해배상 및 기타사항
제 18 조 (손해배상)
당 사이트는 무료로 제공되는 서비스와 관련하여 회원에게 어떠한 손해가 발생하더라도 당 사이트가 고의 또는 과실로 인한 손해발생을 제외하고는 이에 대하여 책임을 부담하지 아니합니다.
제 19 조 (관할 법원)
서비스 이용으로 발생한 분쟁에 대해 소송이 제기되는 경우 민사 소송법상의 관할 법원에 제기합니다.
[부 칙]
1. (시행일) 이 약관은 2016년 9월 5일부터 적용되며, 종전 약관은 본 약관으로 대체되며, 개정된 약관의 적용일 이전 가입자도 개정된 약관의 적용을 받습니다.