• Journal of Advanced Navigation Technology
• /
• v.13 no.2
• /
• pp.238-243
• /
• 2009

Now, the production process systems are largely based on automatic system using the wired network. The production process systems using wired network has disadvantage that it is expensive when the installed and replaced equipment. The each equipment happens to repair cost for control and management in production processes. And the replaced equipment has also the additional expense and breaks production process. These problems are solved through wireless communication between the industrial equipments. So, we propose wireless production process system based on IEEE 802.15.4 technology. It solves a complicated space and stops by replaced equipment in the factory. Then we simulated and analyzed IEEE 802.15.4 for Industrial Equipment based on Wireless Network.

• Journal of the Korean Society of Industry Convergence
• /
• v.26 no.5
• /
• pp.867-874
• /
• 2023

In this paper, a wireless communication-based sensor data monitoring device with an explosion-proof (Exd IIC) case was implemented to enable installation at explosion-risk industrial sites such as plants. In existing industrial plant sites, most of the temperature sensors and vibration and impact sensors are wired up to several kilometers, which takes a lot of time and money to bury long pipes and cables. In addition, there are not many cases where some wireless devices have been applied to actual plant industry sites due to communication quality problems. Therefore, in order to solve this problem, zigbee mesh wireless communication was applied to provide high reliability wireless communication quality to industrial plant sites, and the time and cost incurred in new or additional installation of sensors could be greatly reduced. In particular, in the event of loss or error of some wireless communication devices, the communication network is automatically bypassed or recovered to enable real-time data monitoring.

• Journal of the Institute of Electronics Engineers of Korea TC
• /
• v.45 no.10
• /
• pp.90-98
• /
• 2008

PKI (Public Key Infrastructure) which is used for the security of E-commerce (Electronic-commerce) in wired internet is not suitable for the mobile phone because of the fundamental limitation of performance such as less memory and less powerful CPU. Therefore, we need to develop a wireless PKI (WPKI) that provides the similar security level as the wired PKI supporting mobile phone. In this paper, we propose a lightweight and secure Wireless Certificate Management Protocol (WCMP) that is executable to the mobile phone that has a constrained communication environment and limitation of performance, and show the implementation results of the scheme based on the mobile phone. We minimize data sizes processed in mobile phone, and optimize protocols for the certificate management. This results in the reduced module sizes to be able to install in mobile phone and shows as the same level as the wired CMP.

• The Journal of the Korea institute of electronic communication sciences
• /
• v.18 no.1
• /
• pp.1-10
• /
• 2023

In this paper, the design and implementation of the long-distance wireless transmission technology of high-definition video using domestic wireless communication technology for the existing wired-based CCTV surveillance system and IP camera system was evaluated for performance. The interworking test between the wireless multi-IP camera transmission terminal device and the wireless communication RF module, and the wireless multi-IP camera-based video transmission system integration interworking test confirm the module interworking suitability during video transmission.

• Proceedings of the KSR Conference
• /
• 2005.11a
• /
• pp.275-281
• /
• 2005

In this paper, a new algorithm is proposed for high speed roaming in an Intelligent Train Control System(ITCS) and study on optimized positioning of radio communication equipment. A DCS(Data Communication System) which is a main part of CBTC(Communication Based Train Control) system, is consisted of radio based wireless communication system and wired optical system. In the radio based wireless communication, the position of AP enclosures and antennas shall be optimized for the guaranteed communication channel between wayside and trains both in open aired and tunnelled area. Also a communication channel established between wayside and train shall be maintained while train moves at its maximum speed. This study shows the way of determining the optimal position for the railway side communication equipment in Bundang Line and how to achieve continuous communicating channel for tracking and controlling train.

• The Journal of The Korea Institute of Intelligent Transport Systems
• /
• v.8 no.6
• /
• pp.73-81
• /
• 2009

Wireless media communication has lower robustness and stability than wired communication because of narrow bandwidth and unstable channel state. To make up for the deficient points of wireless communication, we used the diversity effect of cooperation communication and the error correction effect of channel coding schemes. In this paper, the cooperative communication system with RCPC codes and Hybrid ARQ transmission scheme is proposed for improving reliability on wireless communication, and we executed these simulations. From the simulation results, proposed system is showed lower BER performance than legacy system. In addition, we confirm the fact that the channel state of Relay-node and source-node is more important than the channel state of Relay-node and destination-node.

• Journal of the Institute of Electronics Engineers of Korea TC
• /
• v.42 no.12
• /
• pp.45-52
• /
• 2005

This paper proposes low latency handover procedure for seamless connectivity and QoS support between wired (e.g. Ethernet) and wireless (e.g. WLAN, WiBro(802.16-compatible), CDMA) networks by the mobile-assisted and server-initiated handover strategy. It is assumed that the server decides the best target network considering network status and user preferences. In this procedure, a mobile terminal associates with the wireless link decided at the server in advance and receives CoA as well. When handover occurs without the prediction in wired networks, the server performs fast binding update using physical handover trigger through the MIH (media independent handover) function. As a result, a mobile terminal does not need to perform L2 and L3 handover during handover so that this procedure decreases handover latency and loss.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2022.05a
• /
• pp.296-299
• /
• 2022

The rapid urban expansion and the increase in natural disasters due to the increase of population after industrialization and climate change are causing numerous urban management problems. The IP based hyper-connectivity caused by the initiation of the 4th industrial revolution enables a variety of technologies and services that produce vast amounts of data and solve urban management problems based on this. Especially, the quality of life is improved by providing the necessary information for life that are produced through a sensor network on wired and wireless communication. In this study, we intend to propose the method of optimal communcation network composition for innovative and futuristic city management technology through the case of K-water Smart Village Communication System

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.39A no.12
• /
• pp.729-738
• /
• 2014

In this paper, we propose interference avoidance resource allocation scheme based on graph-coloring algorithm to introduce performance gain using spatial reuse in D2D (Device-to-Device) system. By assigning multiple D2D pairs to a single D2D resource, interference from neighboring D2D pairs is inevitable, which leads to performance degradation. Therefore, we first introduce the feedback information and the method considering the amount of information that can be practically provided by a D2D pair. Then, we propose how to construct a graph, which is corresponding to the D2D system, using the feedback information and adopt a graph-coloring algorithm to efficiently avoid interference. Simulation results show that the proposed resource allocation scheme outperforms traditional resource allocation schemes in both overall sum rate and spectral efficiency of D2D system while reducing the outage probability. Moreover, the outage probability, which indicates a failure rate of D2D communication, can be reduced by adopting the proposed scheme.

• The Journal of the Korea institute of electronic communication sciences
• /
• v.18 no.2
• /
• pp.259-268
• /
• 2023

In this paper, it is said that the quality of wireless service has been improved by providing wireless service that can eventually overcome wired wires by using 2.4GHz band wireless access technology that supports 2.4/5GHz dual band. Increasing the maintenance cost incurred when building wireless CCTV, makes it possible to connect with existing CCTV, and study about expanding the service area of A/V surveillance system using CCTV.