• 마이크로전자및패키징학회지
• /
• 제20권4호
• /
• pp.7-11
• /
• 2013

As thermosonic ball bonding is developed for more and more advanced applications in the electronic packaging industry, the control of process stresses induced on the integrated circuits becomes more important. If Cu bonding wire is used instead of Au wire, larger ultrasonic levels are common during bonding. For advanced microchips the use of Cu based wire is risky because the ultrasonic stresses can cause chip damage. This risk needs to be managed by e.g. the use of ultrasound during the impact stage of the ball on the pad ("pre-bleed") as it can reduce the strain hardening effect, which leads to a softer deformed ball that can be bonded with less ultrasound. To find the best profiles of ultrasound during impact, a numerical model is reported for ultrasonic bonding with capillary dynamics combined with a geometrical model describing ball deformation based on volume conservation and stress balance. This leads to an efficient procedure of ball bond modelling bypassing plasticity and contact pairs. The ultrasonic force and average stress at the bond zone are extracted from the numerical experiments for a $50{\mu}m$ diameter free air ball deformed by a capillary with a hole diameter of $35{\mu}m$ at the tip, a chamfer diameter of $51{\mu}m$, a chamfer angle of $90^{\circ}$, and a face angle of $1^{\circ}$. An upper limit of the ultrasonic amplitude during impact is derived below which the ultrasonic shear stress at the interface is not higher than 120 MPa, which can be recommended for low stress bonding.

• 한국해양공학회지
• /
• 제33권6호
• /
• pp.615-619
• /
• 2019

Various fluorides, i.e., CaF₂, Na₃AlF₆, K₂SiF₆, MnF₃, MgF₂, were added to the flux cored wire, and their effects on the oxygen content of the weld metal were investigated. The investigation showed that the oxygen content of weld metal was not influenced by the type of metallic elements in the fluoride; rather, it was influenced by the stability of the arc during welding. While the wire containing MgF₂ showed the most stable arc and the least amount of oxygen in the weld metal, the wire containing MnF₃ showed the least stable arc and the greatest amount of oxygen. Since the deoxidation of the weld metal was not affected by the deoxidation elements, such as Ca and Mg, it was possible to predict the oxygen content of the weld metal by the equilibrium Si-Mn deoxidation thermodynamic model.

• 한국자동차공학회논문집
• /
• 제22권1호
• /
• pp.52-58
• /
• 2014

To improve the performance of clutch actuator of clutch-by-wire system for commercial vehicles, it is necessary to understand the driving characteristics of the system. To explain and predict the effects of driving characteristics on clutch characteristics, AMESim software is used. The simulation model of clutch-by-wire system is developed in the AMESim environments under the geometrical dimensions and driving mechanisms of the clutch-by-wire system, such as the rotation speed of the DC motor, the gear ratio of the reducer, the design parameters of the release fork, the coefficient of the clutch diaphragm spring, and so on. The results show that the theoretical analysis of the clutch-by-wire system for commercial vehicles using the AMESim software find out the driving characteristics of the clutch actuator, and predict the performance characteristics of the clutch-by-wire system.

• Journal of Welding and Joining
• /
• 제16권2호
• /
• pp.93-99
• /
• 1998

The effects of welding conditions of gas metal arc welding on the elements loss of solid wire, oxygen content and impact toughness of weld metals were studied. Deoxidizing elements loss was increased with increase of arc voltage in both short-circuit transfer mode and globular transfer mode. It is believed that increase of arc voltage results in increase of reaction time between elements in the droplet and surrounding gas at the end of wire and in the arc column. Based on the thermodynamic equilibrium model, the oxygen content of weld metal can be predicted with the content of silicon and manganese as following : [%O] = $K([%Si][%Mn])^{-0.25}$, K = -15518/T+6.01. The equilibrium temperature was dependent on shielding gas, and it was 187$0^{\circ}C$ for $CO_2$ gas and 180$0^{\circ}C$ for 20%$CO_2$-80%Ar gas. The oxygen content of weld metal which shows maximum impact toughness was varied with deoxidizing alloy system of wires, 0.041 wt% for Si-Mn type wire and 0.026 wt% for Si-Mn-Ti type wire.

• 한국유체기계학회 논문집
• /
• 제18권3호
• /
• pp.26-32
• /
• 2015

The authors are developing a motion of floater body type wave energy converter of the float-counterweight system. This consists of the driving pulley, wire, float and counterweight suspended from idler pulleys and rachet mechanism. Though it has succeeded in solving the major structural strength problem in which the floats would slam against adjacent structure(s) by wave load acting horizontally. In order to overcome this problem. We propose a new system in which the wire transmitting the power is wound around the pulleys and the float receiving the wave power is pulled by the wire from both its upper and lower ends to avoid the occurrence of slackening during the wave cycle. In the paper, we developed the dynamics model for the proposed system. Energy gain has been calculated for realistic wave conditions and compared with the original float-counterweight device. The important differences from the float-counterweight system are that (1) both upward and downward motions of water surface can be utilized without problem. (2) slackening of energy gain and wire tension are effectively suppressed, and (4) for the same time averaged energy gain, the maximum wire tension is fairly lowered.

• 한국컴퓨터정보학회논문지
• /
• 제16권2호
• /
• pp.113-120
• /
• 2011

무선네트워크 및 센서기술의 발달 및 스마트폰과 같은 지능화된 단말기의 보급 확대를 통해 IT융합형 정보의 활용도가 산업 전반으로 크게 확대되고 있다. 특히 기존 전통산업은 이러한 변화에 직접적인 영향을 받고 있으며 승강기 산업 분야 역시 다양한 분야로의 진화와 변화를 추구하고 있다. 빌딩의 초고층화와 사용자 환경의 다변화는 새로운 환경의 접근방식이 요구되며, 이를 통해 승강기가 삶의 새로운 중심 모델로 자리 잡고자 하는 필요성이 대두되고 있다. 이에 본 논문에서는 IT융합형 승강기 모델을 통해 유무선 통합 환경에서 사용자 중심형 서비스 모델을 제시 하고자 한다. 이를 위해 IT환경과 승강기 시스템과의 관계 모델과 유무선 환경에서의 서비스 모델 그리고 스마트폰 기반의 서비스접근 방법들을 제시한다. 이를 통해 승강기의 접근성을 향상 시키고 유무선 환경에서 보다 효율적인 정보 제공과 사용자의 편이성 및 장애인들의 접근성 보장에 도움을 제공할 수 있을 것이다.

• 한국항공우주학회지
• /
• 제44권3호
• /
• pp.274-280
• /
• 2016

2015년 발사예정인 우주기반기술 검증용 큐브위성 STEP Cube Lab.의 주요 탑재체인 열선절단방식 힌지구동형 구속분리장치는 높은 체결력 및 저충격 구현의 장점으로 초소형위성 전개구조물의 구속/분리에 적용이 용이하며, 기존 나일론선 절단방식의 낮은 체결력 및 복수구조물 적용에 따른 시스템 복잡화의 단점을 극복가능하다. 본 논문에서는 인증모델 검증시험이 완료된 구속분리장치의 궤도검증 임무수행을 목적으로 체결력 검증 및 전개 확인 신호 획득이 가능한 비행모델을 설계/제작하였으며, 탑재체 레벨에서의 발사 및 궤도환경 검증시험을 수행하여 설계 유효성을 입증하였다.

• 한국초전도ㆍ저온공학회논문지
• /
• 제22권2호
• /
• pp.38-43
• /
• 2020

This paper presents comparative research on characteristics of air-cored and iron-cored high-temperature superconductor (HTS) field winding synchronous motors. The 100 kW air-cored model is designed analytically by Spatial Harmonic Method, and based on this model, the iron-cored model having the same output power is designed for comparison. Due to the substantial difference of permeability property between air and iron-core, there is a difference of magnetic field magnitude and angle with respect to the HTS tape c-axis, resulting in a different critical current of the field winding considering the anisotropic property of HTS tape. For a detailed comparison between two models, the following key motor characteristics are calculated through the Finite Element Method (FEM) simulation: 1) critical current; 2) HTS wire length; and 3) torque characteristics. From the simulation results, it can be confirmed that the critical current value of the iron-cored model increases by 33 %. Also, in the case of the superconducting wire consumption, those of the iron-cored and air-cored models are 95.3 m and 815.6 m, respectively. So the wire usage can be reduced to about 88 % by using iron core. However, in terms of torque characteristics, the torque ripple of the iron-cored model is about twice as large as that of the air-cored model, which may be a disadvantage on vibration and acoustic noise.

• Journal of international Conference on Electrical Machines and Systems
• /
• 제3권2호
• /
• pp.176-183
• /
• 2014

Three-phase four-wire distribution systems are used for both three-phase three-wire loads and single-phase two-wire consumer appliances in South Korea, Myanmar and other countries. Unbalanced load conditions frequently occur in these distribution systems. These unbalanced load conditions cause unbalanced voltages for three-phase and single-phase loads, and increase the loss in the distribution transformer. In this paper, we propose constant DC capacitor voltage control based strategy for the active load balancer (ALB) in the three-phase four-wire distribution systems. Constant DC capacitor voltage control is always used in active power line conditioners. The proposed control strategy does not require any computation blocks of the active and reactive currents on the distribution systems. Balanced source-side currents with a unity power factor are obtained without any calculation block of the unbalanced active and reactive components on the load side. The basic principle of the constant DC capacitor voltage control based strategy for the ALB is discussed in detail and then confirmed by both digital computer simulations using PSIM software and prototype experimental model. Simulation and experimental results demonstrate that the proposed control strategy for the ALB can balance the source currents with a unity power factor in the three-phase four-wire distribution systems.

• 대한치과교정학회지
• /
• 제24권3호
• /
• pp.735-758
• /
• 1994

This study was designed to investigate the displacements and reaction forces of teeth caused by the application of the rectangular shape-memory arch wires with curve of Spee. Computer-aided three dimensional finite element method was adopted. This finite element model consists of brick element for teeth, beam element for the wire, and contact element for the periodontal ligament. And the application of the MEAW(Multiloop Edgewise Arch Wire) was also studied so that the results of the two methods can be compared each other. Total number of the nodes and elements were found to be 5925 and 4031, repectively. In addition, several types of elastics and corresponding displacements and reaction forces were examined. The findings of this study were as follows: 1. When the rectangular shape-memory arch wire with curve of Sun was used alone, the intrusion and labioversion was noticeable on the upper incisors, while the upper molars showed less intrusion. With MEAW, the intrusion and labioversion of the upper incisors were slightly larger than those when the shape-memory arch wire was used, but on the upper molars the opposite result was obtained with respect to the intrusion. 2. The shape-memory arch wire with the vertical elastics caused the larger downward displacement on the upper canine than that when the MEAW was used with the vertical elastics. However, the downward displacement of the upper incisors was larger in MEAW. The uprighting and buccoversion of the molars were observed in both cases. 3. The use of the Class II or III elastics showed the extrusion and changes in torque of the corresponding teeth. The downward displacement of the upper canine was increased when the Class II and vertical elastics were applied simultaneously, but it was decreased when both of the Class III and vertical elastics were used.