• Proceeding of KASS Symposium
• /
• 2006.05a
• /
• pp.91-101
• /
• 2006

We have conducted the study about the shelter effect against the wind by using the wind fence with various porosities and the measured distance from the wind fence, in three different types of it ; (Circle wind fence, Vertical wind fence, Horizontal wind fence) The shelter effect and turbulence characteristics of the selected wind barrier is throughly investigated by wind tunnel test. flow characteristics of velocities and turbulences behind wind fence were measured using hot-wire anemometer. we characterize the turbulence behind the wind fence by varying the porosity of 0 %, 20 %, 40%, and 60%, and the distances from the wind fence from 1 H to 9 H with maintaining the uniform flow velocity of 6 m/s. In addition, we investigated the overall characterization of the wind fence by measuring total of twenty eight points on the wind fence, which forms the lattice structure on it with seven points in lateral direction and four points in vertical direction. The results of analysis from the circle wind fence indicate that the degree of the turbulence is lowered and the velocity of the wind is decreased when the porosity of 40 % are used at the distance from 3 H to 9 H. On the other hand, the vertical, horizontal wind fence with the porosity of 20% is more advantageous at the distance of 2 H to 9 H. For the effectiveness of the wind fence depending on the position, the center part is the greatest and it decreases at the edges with 10 % to 30 % less than that of at the center.

• Proceedings of the KOR-BRONCHOESO Conference
• /
• 1983.05a
• /
• pp.18.1-18
• /
• 1983

In 1923 Pierre-Robin first described the triad of micrognathia, glossptosis and high-arched or cleft palate. Respiratory distress is not an uncommon occurrence and requires prompt and appropriate treatment. The syndrome occurs once in approximately 50,000 births. Although the etiology of the syndrome is obscure, it is known that the syndrome probably results from a primary deficiency early in fetal life of mandibular development. The symptoms of airway obstruction develop as the base of the tongue falls posteriorly and approximates the posterior pharyngeal wall because of micrognathia, and is aggravated when the infant is in the supine position. The problems of mild airway obstruction can be solved by keeping the infant in the prone position. In case there are feeding difficulties, prompt glossopexy should be preformed as airway is aggravated, but tracheostomy is best avoided. There is some forms of glossopexy including Douglas operation, the insertion of Kirschner wire and Duhamel suture. We identified micrognathia, glossoptosis and high-arched palate in a 2-month-old infant who was brought to our hospital with complaints of dyspnea and feeding difficulties, and we reports this case, since we think this infant whom we observe after tracheostomy because we found Duhamel suture could not relieve the symptoms of airway obstruction as Pierre-Robin syndrome.

• The korean journal of orthodontics
• /
• v.34 no.6 s.107
• /
• pp.481-487
• /
• 2004

The purpose of this study was to clarify morphologic characteristics between mandibular clinical arch forms in Koreans with normal occlusions. The study included data from 102 Koreans. The most facial portion of 13 proximal contact areas was digitized from photocopied images of the mandibular dental arches. Clinical bracket points were calculated for each tooth based on mandibular tooth thickness data. Four linear and two proportional measurements were taken. The dental arches were classified into ovoid, square and tapered forms. The frequency distributions of the three mandibular arch form classifications were determined and compared between male and female subjects. No significant differences in arch form size were found between the sexes. However, there were a few differences in molar width. It was useful to classify mandibular clinical arch forms present in normal occlusion samples into ovoid, square and tapered categories. The frequency of the ovoid form was the highest, and that of the square form was the second highest. The tapered arch form was found in less than 10 percent of subjects. No significant differences in their frequency distributions and dimensions were shown between males and females.

• Journal of Korean Tunnelling and Underground Space Association
• /
• v.23 no.2
• /
• pp.119-131
• /
• 2021

In general, the stress is concentrated on the pillar of very near parallel tunnel (VNPT), and the pillar has been reinforced by using steel-wires to maintain the stability of the tunnel. However, since the strength of the pillar decreases in the soil layer, the reinforcing pillar with the steel-wires is insufficient for tunnel stability. In this study, the laboratory tunnel experiment was conducted to examine the reinforcement effect for a new method, of which the pillar of VNPT is strengthened by using steel-pipes. As a result, against overburden stress, the bearing capacity of the steel-pipe reinforcement was 22% greater than that of the steel-wire reinforcement. In using the Particle Image Velocimetry method, the analysis shows that the steel-pipe reinforcement forms a more favorable condition of which uniformly the overburden load acts on the VNPT and the pillar than the steel-wire reinforcement. Based on the results, the steel-pipe reinforcement is expected to bring a more positive effect on tunnel stability than the steel-wire reinforcement.

• Journal of Power Electronics
• /
• v.12 no.1
• /
• pp.145-156
• /
• 2012

These days, the application of electronic power transformers (EPTs) is expanding in place of ordinary power transformers. These transformers can transmit power via three or four wire converters. Their dynamic performance is extremely important, due to their complex structure. In this paper, a new method is proposed for improving the dynamic performance of distribution electronic power transformers (DEPT) by using sliding mode control (SMC). Hence, to express the dynamic characteristics of a system, different factors such as the voltage unbalance, voltage sag, voltage harmonics and voltage flicker in the system primary side are considered. The four controlling aims of the improvement in dynamic performance include: 1) maintaining the input currents so that they are in sinusoidal form and in phase with the input voltages so they have a unity power factor, 2) keeping the dc-link voltage within the reference amount, 3) keeping the output voltages at a fixed amount and 4) keeping the output voltages in sinusoidal and symmetrical forms. Simulation results indicate the potential and capability of the proposed method in improving DEPT behavior.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.15 no.6
• /
• pp.511-517
• /
• 2002

The complex 1 $([Cp*Fe(CO)_2]_2-(\mu-CH=CH-CH=CH))$ which have butadiene as a bridge were synthesized from $Cp*(CO)_2FeK$ and cis-3,4-dichlorocyclobutene. The derivatives of complex 1 where one or two carbonyl groups are replaced by phosphine ligands have been prepared by photochemical substitution. The new derivatives $([Cp*Fe(L)_2]_2-(\mu-CH=CH-CH=CH))$ where L = $(Ph_2PCH_2CH_2PPh_2)$ and $([Cp*Fe(CO)(L)]_2-(\mu-CH=CH-CH=CH))$ where L : $PPh_3$ have been characterized from $^^1H-$, $^^13C-$,$^^31P-NMR$ and elemental analysis. Obtained complexes have been studied in electrochemical experiment and UV/VIS-near-IR. The mixed-valence radical cation forms of complex 2, 3 species were found to be delocalized as the Class III. Based on the separation of the waves ($\triangle E$ : 0.470 ~ 0.605 V), the efficiency of electronic communication between two metal centers of cation species leading to stabilization relative to neutral species. The phosphine-substitute complexes (2, 3) displays two reversible oxidation waves and oxidation state of metal centers-dependent color change, electrochromism, was observed from yellow to orange and deep blue in methylene chloride.

• International Journal of Safety
• /
• v.7 no.2
• /
• pp.7-11
• /
• 2008

In this paper, a Magnetic Core Reactor (MCR) which forms a part of the DC reactor type three-phase high-Tc superconducting fault current limiter (SFCL) has been developed. This SFCL is more economical than other types with three coils since it uses only one high-Tc superconducting (HTS) coil. When DC reactor type three-phase high-Tc SFCL is developed using just one coil, fewer power electronic devices and shorter HTS wire are needed. The SFCL proposed in this paper needs a power-linking device to connect the SFCL to the power system. The design concept for this device was sprang from the fact that the magnetic energy could be changed into the electrical energy and vice versa. Ferromagnetic material is used as a path of magnetic flux. When high-Tc superconducting DC reactor is separated from the power system by using SCRs, this device also limits fault current until the circuit breaker is opened. The device mentioned above was named Magnetic Core Reactor (MCR). MCR was designed to minimize the voltage drop and total losses. Majority of the design parameters was tuned through experiments with the design prototype. In the experiment, the current density of winding conductor was found to be $1.3\;A/mm^2$, voltage drop across MCR was 20 V and total losses on normal state was 1.3 kW.

• Proceedings of the KIEE Conference
• /
• 2009.07a
• /
• pp.2140_2141
• /
• 2009

We used the eddy current sensor for a 22.9kV distribution power line insulation cable diagnosis. The insulation cable which is used in the 22.9kV distribution power line is having element wire from 6 to 18. Consequently, currently to ECT applications it has a limit in the distribution power line. We about under producing to apply in pick-up coil forms and the differential total coil form where becomes sum of zero in order to have. From measurement result, partial broken cable was confirmed 500 mV~980 mV changes from normal state.

• Journal of Welding and Joining
• /
• v.32 no.3
• /
• pp.11-18
• /
• 2014

TSV(through silicon via) filling technology is making a hole in Si wafer and electrically connecting technique between front and back of Si die by filling with conductive metal. This technology allows that a three-dimensionally connected Si die can make without a large number of wire-bonding. These TSV technologies require various engineering skills such as forming a via hole, forming a functional thin film, filling a conductive metal, polishing a wafer, chip stacking and TSV reliability analysis. This paper addresses the TSV filling using Cu electrodeposition. The impact of plating conditions with additives and current density on electrodeposition will be considered. There are additives such as accelerator, inhibitor, leveler, etc. suitably controlling the amount of the additive is important. Also, in order to fill conductive material in whole TSV hole, current wave forms such as PR(pulse reverse), PPR(periodic pulse reverse) are used. This study about semiconductor packaging will be able to contribute to the commercialization of 3D TSV technology.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.22 no.10
• /
• pp.854-859
• /
• 2009

The YBCO coated conductor is an important element that forms the superconducting power equipment. The first advantage of applying YBCO coated conductor to superconducting power equipment is that it can effectively addresses the normal and fault currents using less quantity of wire than when using Bi tape due to its high critical current density. Second, it can limit the fault current fast because its index value is high. so that the resistance can be produced fast when it is applied to the superconducting current limiting element. Third, the type of stabilization layer that surrounds the YBCO superconductor is selectable and the magnitude of the resistance that is produced from quenching can be adjusted. This study researched into the manufacture of current-limiting element of using YBCO coated conductor, into the characteristics of current limiter that considered by combining the manufactured element with the resistive-type superconducting fault current limiter.