• Proceedings of the IEEK Conference
• /
• 2003.07a
• /
• pp.65-68
• /
• 2003

3GPP's RLC protocol specification adopted an error control scheme based on selective repeat ARQ. In 3GPP ARQ, distinctive windows are provide at transmitting and receiving stations so that those stations are prohibited to send or receive data PDU's out of window. An increase in window size enhances delay performance. Such an increase, however, raises the occupancy at reordering buffer, which results in a long reordering time. Aiming at suppressing the occupancy at reordering buffer, we propose a occupancy control scheme in this paper. In this scheme, a threshold is created in the receiving station's window and a data PDU out of the threshold (but within the window) is treated according to go back N ARQ. By the employment of the occupancy control scheme, the occupancy at the reordering buffer is apparently reduced, while the delay performance may be degraded due to the properties of go back N ARQ. We, thus, investigate the peak occupancy and mean delay performance by a simulation method. From numerical examples, we observe a trade-off in both performance measures and conclude that the peak occupancy is effectively reduced by setting a proper threshold under a constraint on mean delay performance.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.16 no.7
• /
• pp.1437-1446
• /
• 2012

In this paper we propose a new stereo matching algorithm which is suitable for application to obtain depth information with high-speed in stereoscopic camera environment. For satisfying these condition we propose a new adaptive stereo matching technique using frequency information in discrete wavelet (DWT) domain and variable matching window. The size of the matching window is selected by analysis of the local property of the image in spatial domain and the feature and scaling factor of the matching window is selected by the frequency property in the frequency domain. For using frequency information we use local DWT and global DWT. We identified that the proposed technique has better peak noise to signal ratio (PSNR) than the fixed matching techniques with similar complexity.

• The KIPS Transactions:PartB
• /
• v.14B no.2
• /
• pp.99-106
• /
• 2007

In this paper, we present an AAW(Adaptive Attention Window) based cell image segmentation method. For semantic AAW detection we create an initial Attention Window by using a luminance map. Then the initial AW is reduced to the optimal size of the real ROI(Region of Interest) by using a quad tree segmentation. The purpose of AAW is to remove the background and to reduce the amount of processing time for segmenting ROIs. Experimental results show that the proposed method segments one or more ROIs efficiently and gives the similar segmentation result as compared with the human perception.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2006.05a
• /
• pp.1183-1189
• /
• 2006

Knowledge of acoustic transmission loss of acoustic window material has a great Importance for the sonar performance in ship. The purpose of This study was to investigate the measurement and analysis method for me acoustic transmission loss of the acoustic window materials for sonar dome. The measurement and analysis were carried out in water with GRP material. Transmission losses were calculated based on integrated direct and transmitted signals. The experimental setup enabled to vary the angle of incidence. Thus the transmission loss data could be expressed as the function of frequency and angle of rotation. In this paper, diffraction effect of incident angle, size of specimen with test material, transmission analysis method and multiple waves as incident acoustic signal wet-e discussed

• Journal of the Korean Institute of Telematics and Electronics S
• /
• v.36S no.1
• /
• pp.93-103
• /
• 1999

To detect obstacles and lane-markers for driving vehicles, a new moving window scheme where moving windows are assigned to an image frame captured by a camera is addressed. For the detection of obstacles, it is important to estimate lane-markers precisely and rapidly. For this purpose, selecting some partes of an image frame at the expected lane locations, i.e., selecting window are generally adopted for extracting lane-markers efficiently. In this paper, a new scheme that extracts lane-markers precisely by assigning variable size windows at the expected locations of lane-markers considering the road curvature and finally detects obstacles within a driving lane is proposed. The accuracy improvement using this moving window scheme is showed by comparing to the conventional fixed window method and to using radar to laser sensors.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.15 no.1
• /
• pp.81-88
• /
• 2004

Turbo code has been adopted in the 3GPP standard, since its performance is very close to the Shannon limit. However, the turbo decoder requires a lot of computations and the amount of the memory increases as the block size of turbo codes becomes larger. In order to reduce the complexity of the turbo decoder, the Log-MAP, the Max-Log-MAP and the sliding window algorithm have been proposed. In this paper, the performance of turbo codes adopted in the 3GPP standard is analyzed by using the floating point and the fixed point implementation. The efficient decoding method is also proposed. It is shown that the BER performance of the proposed method is close to that of the Log-MAP algorithm.

• Transactions of the Korean Society for Noise and Vibration Engineering
• /
• v.17 no.6 s.123
• /
• pp.477-483
• /
• 2007

Major noise source in high speed rotating optical disk drives (CD and DVD-ROM) arises due to the high-speed airflow produced from the upper and lower surfaces on the rotating disk. The present paper deals with the experimental approach how to identify the noise source based on the fundamental principles of aeroacoustics and to propose a reduction method of the noise source. The CD-ROM device is composed of disk, window tray, motors at the bottom place and electronic circuit plate also located below the window plate. The window is cut in the tray to read the disk information using the optical device located below the tray and moving linearly from the center of the disk through the end of the disk. All components are possible noise generators. Experimental studies were carried out in the anechoic room with various design modifications, such as tray geometry, window size and hole location on tray, to identify the major aerodynamic noise source and significant reductions of the aerodynamic noise were obtained.

• Journal of KIISE:Databases
• /
• v.33 no.6
• /
• pp.563-577
• /
• 2006

A stream processor uses resource sharing method for efficient of limited resource in multiple continuous queries. The previous methods process aggregate queries to consist the level structure. So insert operation needs to reconstruct cost of the level structure. Also a search operation needs to search cost of aggregation information in each size of sliding windows. Therefore this paper uses linear structure for optimization of sliding window aggregations. The method comprises of making decision, generation and deletion of panes in sequence. The decision phase determines optimum pane size for holding accurate aggregate information. The generation phase stores aggregate information of data per pane from stream buffer. At the deletion phase, panes are deleted that are no longer used. The proposed method uses resources less than the method where level structures were used as data structures as it uses linear data format. The input cost of aggregate information is saved by calculating only pane size of data though numerous stream data is arrived, and the search cost of aggregate information is also saved by linear searching though those sliding window size is different each other. In experiment, the proposed method has low usage of memory and the speed of query processing is increased.

• International Commerce and Information Review
• /
• v.15 no.3
• /
• pp.87-110
• /
• 2013

The aim of this study is as follows. The first, What are the most important factors Affecting Global Single Window Usage and its Performance in Korean Trade Related Companies? The factors proposed for this study includes The pressure of trading companies in other country, Support of government, top management support, partnership among (makers distributors, retailers, customs service), education and training We gathered detailed data on our sample companies mainly from publicly available sources : Korea Customs Service. A structured questionnaire was used to collect information about: (1) general fact about the company (size, lines of business, products and services provided, employee, and some financial data about exporting), (2) To investigate the factors of the five contexts described above on korean export-import companies's global single window. The result are as follows. The analysis result revealed that the pressure of trading companies, support of government are influential variables on the affecting global single window in korean trade related companies.

• Archives of design research
• /
• v.17 no.4
• /
• pp.401-404
• /
• 2004

The proposal defines a Do It Yourself system that radically changes the traditional concept of window. it is based on a D.I.Y. system that allows the users to fully customize its windows according to his needs, combining a wood frame with different elements. At the same time, it is preserving the basic function of light and ventilation and defining a new aesthetic code. Despite the restriction of size and shape, the user can choose among many different elements to increase the space efficiency he needs and to give a more enjoyable perspective to the window both in and out door. Also, All the elements are standard and they can be mass-produced according to specific market needs. Therefore, the window of the future will not be just a thin membrane in between the inside and the outside, but it will also play an important "identification role. According to each individual pick, these new windows will help to give identify to anonymous metropolitan areas and to the people living within them.