• Wind and Structures
• /
• 제19권5호
• /
• pp.481-503
• /
• 2014

A new theoretical model on rain-wind induced vibration (RWIV) of a continuous stay cable is developed in this paper. Different from the existing theoretical analyses in which the cable was modeled as a segmental rigid element, the proposed scheme focuses on the in-plane and out-of-plane responses of a continuous stay cable, which is identical with the prototype cable on cable-stayed bridge. In order to simplify the complexities, the motion law of the rivulet on the cable surface is assumed as a sinusoidal way according to some results obtained from wind tunnel tests. Quasi-steady theory is utilized to determine the aerodynamic forces on the cable. Equations of motion of the cable are derived in a Cartesian Coordinate System and solved by using finite difference method to obtain the in-plane and out-of-plane responses of the cable. The results show that limited cable amplitudes are achieved within a limited range of wind velocity, which is a unique characteristic of RWIV of stay cable. It appears that the in-plane cable amplitude is much larger than the out-of-plane cable amplitude. Rivulet frequency, rivulet distribution along cable axis, and mean wind velocity profile, all have significant effects on the RWIV responses of the prototype stay cable. The effects of damping ratio on RWIVs of stay cables are carefully investigated, which suggests that damping ratio of 1% is needed to well mitigate RWIVs of prototype stay cables.

• 한국전자통신학회논문지
• /
• 제15권5호
• /
• pp.819-826
• /
• 2020

기상청의 UHF 대역 윈드프로파일러 레이더는 바람의 연직 분포를 산출하는 장비로, 더 나은 성능을 위해 보정이 필요하다. 보정은 강수에 민감한 UHF 레이더의 특징을 이용하고, 레이더 사이트에서 우량계로 측정한 시간별 일련의 지상 강우 강도를 기준으로 한다. 장비 보정을 하지 않으면 청천에서도 바람 벡터에 오차가 발생할 수 있으므로, 레이더 상수 결정 방법에 따라 정기적으로 보정 작업이 수행되어야 한다. 레이더 산출 바람을 라디오존데로 관측한 바람과 비교하여, 최적의 레이더 상수가 바람의 정확도 향상에 이바지하는 것을 확인하였다.

• 대기
• /
• 제18권3호
• /
• pp.207-224
• /
• 2008

Severe downslope windstorms observed at Gangneung, Korea in the springtime during the last 30 years are studied to understand their generation mechanisms. 92 severe wind cases are selected for which the maximum instantaneous wind speeds exceed two standard deviation of total mean plus ($18.7ms^{-1}$). They are categorized into the three mechanisms (hydraulic jump, partial reflection, and critical-level reflection) proposed in previous studies based on the flow condition, which is calculated using the wind and temperature profile observed at one upstream rawinsonde station, Osan. Among the three, partial reflection is found to be the most frequent mechanism for the last 30 years (1976 - 2005). To understand the role of inversion in generating severe downslope windstorms, horizontal velocity perturbation was calculated analytically for the atmosphere with an inversion layer. It turned out that the intensity of downslope wind was increased by inversion layer of specific heights, which are well matched with the observations. For better understanding the generation mechanisms, two-dimensional numerical simulations are conducted for the 92 severe wind cases using the ARPS model. In most simulations, surface wind speed exceeds the value of the severe-wind criterion, and each simulated case can be explained by its own generation mechanism. However, in most simulations, the simulated surface wind speed is larger than the observed, due to ignoring the flow-splitting effect in the two-dimensional framework.

• 한국가시화정보학회지
• /
• 제17권1호
• /
• pp.43-52
• /
• 2019

'Ionic wind' is phenomenon induced by corona discharge which occurs when large electric potential is applied to electrodes with high curvature. The ionic wind has advantage that it could generate forced convective flow without any external energy like separate pump. In this study, 'pin-mesh' arrangement is utilized for experiments. First, optimization of configuration is conducted with local momentum of ionic wind behind the mesh. Empirical equation for prediction about velocity profile was derived using the measured results. Secondly, the enhancement of mass transfer rate of acetone with ionic wind was analyzed. Also, the drying efficiency using a fan which has same flow rate was compared with ionic wind for identification of additional chemical reaction. At last, the drying process of organic solvent was visualized with image processing. As a result, it was shown that the use of ionic wind could dry organic matter four times faster than the natural condition.

• 천문학회지
• /
• 제29권spc1호
• /
• pp.195-196
• /
• 1996

We observed CO J = 2 $\to$ 1 and J = 3 $\to$ 2 lines toward several star formation regions with extremely high velocity (EHV) outflows: W3 IRS5, W28 A2, GL2591, S140, and Cepheus A. The full width of the wings are 90-235 km $s^{-1}$. Some wings show clear break of slope in the line profile implying that the nature of the EHV outflow is different from that of the high velocity outflow. We suggest that the EHV CO wing emission is tracing CO molecules in the stellar wind or jet which drives the high velocity outflow.

• 한국전자통신학회논문지
• /
• 제13권6호
• /
• pp.1191-1198
• /
• 2018

윈드프로파일러 레이더는 고정점에서 대기물리 신호와 바람 벡터의 연직 프로파일을 제공한다. 바람 벡터는 제조사의 자료 처리 프로그램으로 산출되기 때문에 품질 관리에 한계가 있다. 따라서 바람 벡터의 품질을 향상시키기 위해서 원시 스펙트럼 자료의 이해와 활용이 이루어져야 한다. 바람 벡터의 원시 자료는 바이너리 형태로 저장되는 파워 스펙트럼 밀도이다. 본 연구에서는 원시 자료를 실수형 스펙트럼 밀도로 변환하는 알고리즘을 완성하고 스펙트럼 기반 0차와 1차 모멘트를 구현하여 원시 자료의 활용을 평가하였다.

• Journal of the Optical Society of Korea
• /
• 제17권1호
• /
• pp.103-108
• /
• 2013

The operation of a Doppler wind LIDAR in a mobile environment is very sensitive to shocks and vibrations, which can cause critical failures such as misalignment of the optical path and damage to optical components. To be able to stabilize the LIDAR and to perform wind field measurements in motion, a shock absorption and vibration isolation system was designed and implemented. The performance of the vehicle-mounted Doppler wind LIDAR was tested in motion, first in a circular test route with a diameter of about 30 m and later in regular expressway traffic. The vibration isolation efficiency of the system was found to be higher than 82% in the main vibration area and shock dynamic deflection was smaller than maximal deflection of the isolator. The stability of the laser locking frequency in the same mobile environment before and after the vibration isolation system installation was also found to be greatly improved. The reliability of the vibration isolation system was confirmed by good results of the analysis of the LIDAR data, in particular the plane position indicator of the line of sight velocity and the wind profile.

• 한국해양학회지
• /
• 제29권2호
• /
• pp.119-131
• /
• 1994

모드분리기법의 gird-box형 3차원 수치모형을 이용하여 등밀도 등수심 유한영역에 서의 연직과점성 개수에 따른 취송유와 조류의 수평 유속 연직구조를 분석하였다. 연) 직과점성 계수가 수심에 일정할 경우 선영적으로 감소또는 증가하는 경우 이차함수 및 지수함수적으로 변하는 경우에 대한 해석해와의 비교를 통하여 모형 검증 및 연직유속 구조 분석이 실시되었다. 아울러 취송유에 경우 유속의 연직구조에 대한 해수표면 근 처에 "wall layer" 영향을 수치적으로 검토하였다. 모든 수직계산에서 연직층수는 열 세개로 가변 객자가 사용되었다. 수치모형은 유속의 연직구조를 만족스럽게 재연하게 으나 연직과점성 개수가 수심에 대하여 2차함수 및 지수적으로 감소하는 경우 해저면 부근에서 유속의 연직변화가 크게 나타나면서 해석해와 수치모형 결과간에 약간에 차 이가 나타났다. 수평 유속의 연직구조는 연직과점성 계수의 절대값 및 함수형태에 따 라 달라지며 해저면과 해수표면 부근의 유속은 wall layer 내의 연직과점성 계수에 민 감하게 반응하였다. 취송유에 경우에 해수표면에서의 연직 과점성 계수가 작을수록 강 한 shear가 표층에 형성되었으며 조류에 경우 연직 과점성 계수의 분포와 상관없이 해 저 한계층 상부의 유속은 거의 일정하게 나타나고 해조표내의 유속은 연직과점성 계수 가 줄어들수록 강한 shear 보였다.shear 보였다.

• 에너지공학
• /
• 제5권1호
• /
• pp.50-55
• /
• 1996

상용 code인 Fluent를 이용하여 도자기의 1차 소성로에 대해 온도장과 속도장을 계산하고 열효율을 산출하였다. 수치해석의 변수로는 배출구 및 도자기의 위치를 변화시켰으며, 수치해석 방법은 검사체적에 기초한 유한차분방법 및 Upwind scheme과 SIMPLEC Algorithm을 사용하였고 난류모델로는 표준 k-$\varepsilon$ 모델을 사용하였다. 계산결과 출구 위치가 전체 소성로내 벡터유동의 양상을 크게 좌우하는 것으로 나타났으며, 전체 온도장에 대해서는 복사의 영향으로 큰 차이를 보이지 않았으나 예열대 상부에 출구가 있는 경우와 비교할 때 예열대 또는 냉각대의 측면에 출구가 있는 경우에 그 영역의 온도가 다소 높게 나타났다. 소성품의 위치는 로내 유동장 및 온도 분포에 크게 영향을 끼치지는 않으나 소성품 내 온도는 그 위치하는 영역의 온도 분포에 크게 영향을 받는 것으로 나타났다. 예열대 상부에 출구가 있는 경우 열효율은 17%로 매우 저조하였고 출구에서의 가스온도는 약 1000 K로 매우 높았다.

• Wind and Structures
• /
• 제19권2호
• /
• pp.113-144
• /
• 2014

Separation bubble and conical vortices on a large-span flat roof were observed in this study through the use of flow visualization. The results indicated that separation bubble occurred when the flow was normal to the leading edge of the flat roof. Conical vortices that occur under the cornering flow were observed near the leading edge, and their appearance was influenced by the wind angle. When the wind changed from along the diagonal to deviating from the diagonal of the roof, the conical vortex close to the approaching flow changed from circular to be more oblong shaped. Based on the measured velocities in the conical vortices by flow visualization, a proposed two-dimensional vortex model was improved and validated by simplifying the velocity profile between the vortex and the potential flow region. Through measured velocities and parameters of vortices, the intensities of conical vortices and separation bubble on a large-span flat roof under different wind directions were provided. The quasi-steady theory was corrected by including the effect of vortices. With this improved two-dimensional vortex model and the corrected quasi-steady theory, the mean and peak suction beneath the cores of the conical vortices and separation bubble can be predicted, and these were verified by measured pressures on a larger-scale model of the flat roof.