• Proceedings of the Korea Concrete Institute Conference
• /
• 2005.05b
• /
• pp.421-424
• /
• 2005

Discusses the results of an investigation of the relationship between maturity in field-cured specimens and that from the thinner dimension structure to thick, particularly at cold weather concrete. Tests were carried out on two different concrete mixes with 28 day compressive strengths ranging approximately 30MPa. Ready-mixed concrete was used, and test specimens were the conventional field-cured 10$\times$20cm concrete cylinder with insulating materials and without them, and test structures were the thinner(width 20cm), the general(width 40cm), the thick dimension(width 60cm), respectively. Tests were performed at age of 3, 7, 14, 28 day. Analyses of test results show that the maturity of concrete for require compressive strength was suggested to be keep higher than $164D^{circ}D$ until at least from 8day to 10day

• The Journal of Advanced Prosthodontics
• /
• v.9 no.2
• /
• pp.93-98
• /
• 2017

PURPOSE. The purpose of this study was to compare the width ratio of maxillary anterior teeth according to age in the Korean population and to evaluate the maxillary central incisor width-to-length (W/L) ratio, given differences in age and gender. MATERIALS AND METHODS. Ninety-three Korean adults were divided into 3 groups (n = 31) by age. Group I was 20 - 39 years old, Group II was 40 - 59 years old, and Group III was over 60 years of age. After taking an impression and a cast model of the maxillary arch, the anterior teeth width ratio and central incisor W/L ratio were calculated from standard digital images of the cast models using a graph paper with a digital single lens reflex (DSLR) camera. The calculated ratios were compared among all groups and central incisor W/L ratio were analyzed according to age and gender. All comparative data were statistically analyzed with one-sample t-tests, one-way ANOVAs with Tukey tests, and independent t-tests. RESULTS. No significant differences in maxillary anterior teeth ratios were found among the age groups. The maxillary central incisor W/L ratios in Group III were the greatest and were significantly higher than those in the other groups. The central incisor W/L ratio of men was higher than that of women in Group II. CONCLUSION. Maxillary anterior teeth width ratios were similar in all age groups in the Korean population. The maxillary central incisor was observed as worn teeth in the group over 60 years of age, and a significant difference between genders was found in 40 to 50 year olds.

• The Research Journal of the Costume Culture
• /
• v.25 no.1
• /
• pp.64-74
• /
• 2017

The purpose of this study is to identify the sensibility images when the direction and width of stripes change on semi-tight skirts. The researcher made 12 stimuli consisting of images of skirts with a combination of six stripe directions and two stripe widths. The images were assessed by 126 subjects who were students majoring in apparel. Three sensibility image factors were found: personality, attractiveness, and activity. Images of skirts with different stripe directions were perceived as having significant differences among these factors. Stripe widths of 1.5cm and 3cm in upward diagonal, vertical side line, and downward diagonal directions influenced the personality factor. Diagonal stripes with a width of 1.5cm positively influenced attractiveness and activity. Stripes in a vertical direction increased attractiveness when the stripe width was 1.5cm rather than 3cm. Although the interaction of stripe direction and width significantly influenced perceptions of attractiveness and activity in images of semi-tight skirts, they did not significantly influence personality. In accordance with the analysis, stripe direction was significantly different for all factors. This analysis indicated that each factor has its own independent influence. Stripe width had major independent effects, showing significance in attractiveness and activity. However, personality did not indicate any significant difference. The results of this study will help women select suitable clothing according to their individual preferences and body shapes by influencing how images are depicted because women will be able to use the images to estimate their body images when the skirts are put on.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.21 no.1
• /
• pp.170-181
• /
• 1997

The purpose of this study was to determine the effect of knit structure and knit density (machine tightness factor) on the dimensional properties and K1-4 values of weft-knitted fabrics followed over eleven cycles of mechanical relaxation to provide the basic data for constructing weft-knitted fabrics for outwear with excellent dimensional stability The eighteenth weft-knitted fabrics were produced with different knit structure (1$\times$1 rib, half-cardigan rib, half-milano rib, interlock, single pique, crossmiss interlock) and machine tightness factor (loose, medium, tight) for this study. Dimensional properties such as width, lengh, area shrinkage and dimensional parameter (K) of eighteenth knitted fabrics including thickness and bulk property were measured. The results were as follows; 1. The dimensional behavior of the Ix1 rib and interlock in relaxation cycles was anisotropic, i.e., length shrinkage was usually associated with a width expansion, whereas the other weft-kntted fabrics which have tuck or miss loops in the knit structure behaved isotropically, i.e., length and width shrinkages were usually found. It was proposed that the difference in dimensional behavior between these structures was due to the dissimilar nonrelaxed geometrical shapes of the individual structural units forming these weft-knitted structures. The mechanical relaxation shrinkage of weft-knitted cotton fabrics was dependent on the tightness of construction. For a range of fabrics knitted on this study, an increase in fabric tightness caused a decrease in the length shrinkage of the fabric accompanied by an increase in its width shrinkage.

• Korean Journal of Human Ecology
• /
• v.14 no.3
• /
• pp.475-483
• /
• 2005

The ready-made clothes for obese women are not manufactured systematically due to the diversity and scarcity of their body shape. In this study, we first analyzed and classified 104 obese women's body shape to select four representative subjects. Then, the four subjects participated in wearing test to evaluate the performance of the jacket patterns which are available in the market and widely-used at the same time. The characteristics of the jacket patterns for obese women were also investigated. As to the highly rated jacket in terms of body motion, it was found that difference between the breast width to axilla and the breadth to anterior midaxilla is larger than the other jackets, and the breast width of front body is wider than what of back width. It was noted, however, that the armhole depth and the width of obese women' jackets should not be determined indirectly by the magnitude of the girth around bust, waist or hip as in the case of regular sized women's. It is because body proportion of obese women is different from that of standard sized women.

• Journal of The Korean Society of Agricultural Engineers
• /
• v.52 no.4
• /
• pp.1-10
• /
• 2010

In this study, two estimation equations for preparing stream data for distributed storm runoff model were developed by analyzing the nonlinear relation between upstream flow-length and stream width, and between upstream flow-length and stream bed-slope. The equations for stream cell were tested in Chungjudam watershed (6,661 $km^2$) using KIMSTORM. Six storm events occurring between 2003 and 2008 were selected for the model calibration and verification before the test of equations. The average values of the Nash-Sutcliffe model efficiency (ME), the volume conservation index (VCI), the relative error of peak runoff rate (EQp), and the difference of time to peak runoff (DTp) were 0.929, 1.035, 0.037, and -0.406 hr for the calibrated four storm events and 0.956, 0.939, 0.055, and 0.729 hr for the two verified storm events respectively. The estimation equations were tested to the storm events, and compared the flood hydrograph. The test result showed that the estimation equation of stream width reduced the peak runoff and delaying the time to peak runoff, and the estimation equation of stream bed-slope showed the opposite results.

• Journal of radiological science and technology
• /
• v.1 no.1
• /
• pp.69-73
• /
• 1978

This study was conducted in order to determine width, length of lung by radiographic method. The measurements carried out on normal chest X-ray film of 1,036 persons who took the radiograph from the April of 1977 to the June of 1978. As a result of this study, the following conclusions were obtained: 1. In the case of male, the average width, and length of both side lung size from new birth to nineteen of age was larger than female with the exception of partly age group. 2. Lung size in average width at adult was from 27.60cm to 29.20cm and female was 25.10cm to 26.22cm. 3. The mean length of left lung at adult was from 26.32cm to 25.27cm in female. 4. The average length of right lung at adult was from 25.8cm to 28.35cm in male and female was from 24.86cm to 25.17cm. 5. It was found that lung sige in width and length was slightly increased until 39 years of age, but was trend to decrease it of lung in the age of 40 years old. 6. In the case of adult, the difference of the average length between right and left lung, the length of right lung was slightly shorter than left that.

• Journal of the Korean Association of Oral and Maxillofacial Surgeons
• /
• v.28 no.4
• /
• pp.318-325
• /
• 2002

The primary method of diagnosis in craniofacial deformity patient is used by gross inspection. So we studied the frontal photometric measurements for maxillofacial Korean normals 44 male and 48 female ages 19 to 20 years were selected from a group of 92 healthy Kyung Hee university students in Seoul.. The photograph were taken with the subject sitting in head position parallel with interpapillary plane to the floor. During taking pictures, facial anallyser by Obwegeser(Martin Co., Germany) was used for correct measurements. The results of this study was followed. 1. In the linear measurements, all values of males were longer than those of females but middle third height and lower third height, facial width and nasal width of males were longer than those of females in p<0.05 2. The difference between right and left angular and linear measurement was insignificant. 3. In the horizontal facial ratios, interocular distance and nasal width were longer and mouth width were smaller in korean than in american(p<0.05). 4. In the vertical ratios, korean women have shorter facial height of lower third comparing with facial height of middle third than american(p<0.05). 5. In the vertical facial ratios, korean have smaller proportion below the stomion in the lower third department than american. (p<0.05).

• The Research Journal of the Costume Culture
• /
• v.9 no.1
• /
• pp.33-43
• /
• 2001

In this study, both kinds of materials, that is, leather and woolen fabrics, which have similar thickness, have been adopted. To determine proper length of ease, not only sleeve cap height but also sleeve width has been adjusted mainly based on 5cm length of the ease, which follows maximum sleeve cap height, and then different length of ease, for example, 4cm, 3cm, 2cm and 1cm of ease, have been made. As a result, eighteen kinds in total of sleeves have been made: In other words, each nine kinds of both leather and woolen fabrics have different ease lengths. In addition, each sleeve has been inspected visually and functionally. Following conclusion has been gotten based on outcome of the study: 1. Proper ease length for manufacture of leather garment is said to be 1∼2 cm. As a result, ease length with higher sleeve cap height shall be 1∼2cm, while the length with lower sleeve cap height shall be 1cm or less. 2. Wider sleeve width has better function. Considering relations with sleeve cap height, sleeve width shall exceed +4cm of bicep line. 3. to satisfy a variety of those conditions while manufacturing leather garment, sleeve cap height, which is used for the manufacture of full dress and street wear garment, To lessen the ease length, body A.H shall be relatively loose under the arms, or pad shall be supplemented on the shoulder, so that the difference had better be lessened to solve such problems.

• Journal of Korean Society of Transportation
• /
• v.21 no.2
• /
• pp.17-31
• /
• 2003

This study is about throughput analysis of the shared right turn lane at signalized intersection with lane width change. It is expected that the increased width of the right turn shared lane causes to increase the volume of right turn on red(RTOR) In this study, the throughput computation is designed to take into account the lost time which is caused by the blocked right turn due to the stop of through traffic. The saturation flow rate of right turn using the rest of lane after through traffic stops is included as well. Results show that the different RTOR volume levels due to the various shared lane width leads to a difference in throughput. For the shared right turn lanes. throughput capacity for various lane widths is bigger than that of the KHCM as much as from 1.1 to 2.1 times.