• 한국환경복원기술학회지
• /
• 제8권1호
• /
• pp.27-36
• /
• 2005

Geosynthetic reinforcements may be damaged during its installation in the filed. The installation damage mainly depends on two factors such as materials used and construction activities. This paper describes the results of a series of field tests, which are conducted to assess the installation damage of geogrid according to different maximum grain sizes of fills (40, 60, and 80 mm). These tests are done in three sites for twelve different kinds of geogrids. After field tests, the changes in tensile strength of the geogrids is determined from wide width tensile tests using both damaged and undamaged specimens. In the results of tests, tensile strength of the relatively flexible geogrids after field installation tests was decreased about from 20% to 40% according to the increment of the maximum grain size. On the other hand, for the relatively stiff geogrids, the loss of the tensile strength after site installation was examined below 5.2% independent of the maximum grain size of the soils. The results of this study show that the installation damage significantly depends on the stiffness of geogrid and is more obvious to a flexible geogrid and a fill material having higher maximum grain size.

• 한국지반공학회:학술대회논문집
• /
• 한국지반공학회 2004년도 춘계학술발표회
• /
• pp.978-985
• /
• 2004

Geogrid may be damaged during its installation in the filed. The installation damage mainly depends on two factors, which are materials used and construction activities. Materials relate to geogrid and soils, and construction activities are mainly related to installation of geogrid and compaction of soils. This paper describes the results of a series of field tests, which were conducted to assess the installation damage of the various geogrids according to different fill materials. After field installation damage tests, the change in tensile strength of geogrids was determined from wide width tensile tests using both damaged and undamaged specimens.

• 한국지반공학회논문집
• /
• 제24권1호
• /
• pp.71-80
• /
• 2008

본 논문에서는 보강토 구조물에 보강재로 적용되는 지오그리드의 시간 의존적 변형거동 특성에 대한 광폭 인장시험 결과를 제시하였다. 먼저, 다양한 보강재의 종류에 대해 인장속도에 따른 파단강도 및 강성의 변화에 대해 알아보았다. 또한 보강토 구조물이 사용연한 동안 받게될 다양한 하중 조건, 즉 지속하중 및 반복하중을 작용시킬 수 있는 장비를 특수 제작하여 지오그리드의 시간의존적 변형거동을 분석하였다. 그 결과 지속하중 및 반복하중 작용시 잔류변형은 보강재의 점성(viscous) 특성의 형태로서 쌍곡선 특성 곡선으로 잘 모사되는 것으로 분석되었으며 이러한 잔류변형은 시간의존적 점성거동의 측면에서 다루어야 하는 것으로 나타났다.

• 한국지반신소재학회논문집
• /
• 제6권2호
• /
• pp.21-26
• /
• 2007

지오그리드의 인장강도 특성은 시험온도, 시료길이, 변위측정방법, 인장속도 및 시험장치 등에 영향을 받는다. 지오그리드의 인장강도시험법은 ASTM 06637 및 ISO 10319에 규정되어 있다. 그러나 이 두 시험법은 인장속도 및 시료길이에서 다소간의 차이를 가진다. 본 연구에서는 국내에서 많이 사용되고 있는 세 가지 종류의 지오그리드를 대상으로 일련의 광폭인장강도시험을 수행하여 시료길이 및 인장속도가 지오그리드의 광폭인장강도에 미치는 영향을 평가하였다.

• 한국지반신소재학회논문집
• /
• 제21권1호
• /
• pp.33-48
• /
• 2022

This paper presents illustrative examples of the application of advanced digital image correlation (DIC) technology in the geotechnical laboratory tests, such as shallow footing test, trapdoor test, retaining wall test, and wide width tensile test on geogrid. The theoretical background of the DIC technique is first introduced together with fundamental equations. Relevant reduced-scale model tests were then performed using standard sand while applying the DIC technique to capture the movement of target materials during tests. A number of different approaches were tried to obtain optimized images that allow efficient tracking of material speckles based on the DIC technique. In order to increase the trackability of soil particles, a mix of dyed and regular sand was used during the model tests while specially devised painted speckles were applied to the geogrid. A series of images taken during tests were automatically processed and analyzed using software named VIC-2D that automatically generates displacements and strains. The soil deformation field and associated failure patterns obtained from the DIC technique for each test were found to compare fairly well with the theoretical ones. Also shown is that the DIC technique can also general strains appropriate to the wide width tensile test on geogrid, It is demonstrated in this study that the advanced DIC technique can be effectively used in monitoring the deformation and strain field during a reduced-scale geotechnical model laboratory test.

• 한국지반환경공학회 논문집
• /
• 제13권2호
• /
• pp.83-93
• /
• 2012

보강토옹벽은 1980년대 초반 국내에 도입된 이래로, 다양한 금속 혹은 토목섬유 보강재가 개발되어 현장에 적용되고 있으며, 특히, 국내에서는 지오그리드가 가장 많이 적용되고 있다. 이에 본 연구에서는 현재 국내에서 생산되고 있는 4가지 종류의 지오그리드에 대해 인장강도-인장변형 관계 특성을 고찰하였다. 또한 재질 및 제조방식이 상이한 3가지 지오그리드에 대해서는 일련의 광폭인장강도시험을 수행하여 실제 지오그리드 인장변형과 변형률계에 의해 측정된 인장변형을 비교하였다. 실험결과, 변형률계에 의해 측정된 인장변형률이 광폭인장강도시험기에 의해 측정된 실제변형률 보다 다소 큰 경향을 보이나 인장변형률이 3% 보다 작은 경우에는 측정방법에 따른 차이가 거의 없는 것으로 확인되었다.

• 한국섬유공학회:학술대회논문집
• /
• 한국섬유공학회 2003년도 The Korea-Japan Joint Symposium
• /
• pp.104-104
• /
• 2003

Geosynthetic Reinforcements - membrane drawn type, warp/knitted type, junction bonded type and composite type geogrids, strip type reinforcement - were used to compare the long-term perfor-mance by total factor of safety with reduction factors during service periods. To evaluate the reduction factors, wide-width tensile property, installation damage, creep deformation, chemical and biological degradation tests were performed. Long-term design strengths of geosynthetic reinforcements were calculated by using GRI standard Test Method GG4.

• 한국안전학회지
• /
• 제17권2호
• /
• pp.52-57
• /
• 2002

In this study. stress-strain relationships were investigated by performing the confined extension tests for seven types of geosynthetics such as geotextiles, composite geosynthetics and geogrids. A comparison was made between unconfined and confined moduli for each geosynthetic material to quantify the soil confinement effect on stress-strain properties. A comparison was also made between the increase of moduli at the same strain level with the types of the geosynthetics to demonstrate the different stress-strain responses. Based on the result of the extension tests, the higher the confining stress, the larger the secant modulus of geosynthetics. The secant modulus at 5% strain is twice as much as that of 10% strain, especially there is a noticeable increasing of secant modulus for the two nonwoven geotextiles.

• 소성∙가공
• /
• 제20권4호
• /
• pp.296-302
• /
• 2011

The objective of this paper is to determine the effect of process parameters on the behavior of a 18Cr-10Mn-$0.44N_2$ nitrogen steel sample deformed by hot rolling. Compression tests were carried out at high temperatures to determine the flow stresses needed for a finite element(FE) analysis. The strain rate, ranging from 0.1 to $1.0s^{-1}$, significantly affected the flow stress at temperatures higher than $1,000^{\circ}C$. Non-isothermal rolling simulations and laboratory rolling tests were performed with plate specimens 14.5mm thick, 135mm wide and 226mm long. A rolling reduction of 15% per pass leading to a cumulative rolling reduction of 60% was determined as optimal. The extension ratio of 176.5% in the length direction was about 30.4 times greater than the extension ratio of 5.8% in the width direction. Isotropic properties for tensile strength, microstructure and grain size were measured after mock-up hot rolling tests. The results from the mockup tests were found to be in good agreement with those of the simulations.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 2000년도 가을 학술발표회 논문집(II)
• /
• pp.989-994
• /
• 2000

Nine tests to failure are performed on full-scale eight composite beams with unreinforced web opening having ribbed slabs with formed deck which are perpendicular to the steel section and one steel beam. The effects of slab width, reinforcing of stud, moving of rib, moment-shear ratio are studied. At the low M/V ratio, Vierendeel action around the high moment end of the opening is occurred and the large deflection across the opening and transverse cracking are occurred with increasing of applied load. As the M/V ratio increases, the relative deflection across the opening decreases. And at failure, full tensile strain are occurred at bottom T section of steel beam, and concrete crushes at the High Moment End of the opening. With narrow slabs, diagonal tension failure at the high moment end of the opening is occurred. And with wide slabs, rib punch-through failure is occurred near the high moment end of the opening. The implications for design are discussed.