• 펄프종이기술
• /
• 제30권2호
• /
• pp.85-95
• /
• 1998

Traditionally, Hanji had been made only with the bast fiber of paper mulberry (Broussonetia kazinoki). Nowadays, Hanji has been made mainly in the mixed forms of paper mulberry bast fiber and waste paper, and consequently it has raised many problems using them. This study was carried out to investigate the characteristics of Hanji mixed with paper mulberry bast part and whole stalk pulps. Hanjis made from the solfomethylated pulp were shown higher brightness and sheet strengths than those from alkali and alkali-hydrogen peroxide pulps. The brightness of solfomethylated pulp was found to be high enough not to need additional bleaching. The sheet formations were improved as the increase of whole stalk pulp contents, while the sheet strengths were decreased. In the physical properties of the Hanji mixed with bast part and whole stalk pulps, the handsheet strengths were decreased as the increase of the whole stalk pulp contents. The tensile strength and folding endurance of the Hanji containing 40∼60% of whole stalk pulps were higher as compared to the others.

• 펄프종이기술
• /
• 제31권4호
• /
• pp.84-92
• /
• 1999

Excellence of the Korean traditional paper(Hanji) can be proved by literatures and legacies handed down from generations. However, with the problems pertaining to a majority of traditional manufactures, Hanji industry was declined because of low productivity, insufficient supply of raw material , and reduced demand. therefore, modernizxation of the Hanji technology and development of new uses are very important. This study was carried to investigated the papermaking characteristics of Morus spp.(M.alba, M.Bombycis, and M.Ihou) for new Hanji, modernize manufacturing process of Hanji by grafting on developed modern pulping and papermaking technology, develop the various uses, and establish the foundation for development of high value-added products. Hanji is made from M.Ihou, while stalk , and sulfomethylated pulp gave better sheet formation and higher brightness than those of the others. Physical properties of Hanji which made from bast fiber pulps were better than those of whole stalk pulps. Hanji which made from M.bombycis bast fiber and whole stalk pulps were not so good sheet strength as other species. Sulfomethylated whole stalk pulps were shown better sheet strength than alkali and alkali-hydrogen peroxide whole stalk pulps.

• 펄프종이기술
• /
• 제38권3호
• /
• pp.38-46
• /
• 2006

This study was carried out to investigate the sheet properties of Morus Hanji, made by different pulping methods, such as alkali, alkali-peroxide and sulfomethylated pulping, and different stocks composed to bast and whole stalk fibers. Two species of Morus, M. alba and M. lhou, were used. Pulp yield of the whole stalk parts, its brightness and opacity were higher than those of bast part. In particular sulfomethylated pulp has higher brightness of $62{\sim}63%$, than other pulps(average brightness $30{\sim}40%$). In mechanical properties, paper made of bast fiber has higher strength than those of the whole stalks. Hanji made from M. lhou, whole stalk, and sulfomethylated pulp gave better sheet formation and higher strength than those of the others. Hanji from M. alba bast fiber and whole stalk pulps were not so good sheet properties.

• 펄프종이기술
• /
• 제31권3호
• /
• pp.96-104
• /
• 1999

Anatomical and chemical properties of three mulberry species (Morus spp) were analyzed as an alternative row material for the paper mulberry (Broussonetia kazinoki) . The pulping and papermaing characteristics of bast fiber and whole stalks by three different pulping processes, conventional alkali, alkali-hydrogen peroxide, and sulfomethylated, for the Hanji were investigated. The fiber dimension of M.bombycis was the biggest of the species. The fiber length of upper part and the fiber width and cell wall thickness of lower part were bigger than the others. The extractives and ash contents of bast fiber were higher than those of whole stalk , and holocellulose and lignin contents of whole stalk were higher than those of bast fiber. The pulp yields of M.alba bast fiber, M.bombycis whole stalk, and sufomethylated pulping were higher than the others.

• Asian-Australasian Journal of Animal Sciences
• /
• 제19권6호
• /
• pp.816-824
• /
• 2006

This study was conducted to evaluate the shoot height at which the yield and nutritive value of wormwood (Artemisia montana) is optimized in order to provide information on its potential to support animal production (Experiment 1). A second objective was to determine how the essential oil (EO) concentration in wormwood hay and silage differ (Experiment 2). In Experiment 1, Artemisia montana was harvested at five different shoot heights (20, 40, 60, 80 and 100 cm) from triplicate $1.8{\times}1.8m$ plots. Dry matter (DM) yield was measured at each harvest date and the harvested wormwood was botanically separated into leaf, stalk and whole plant fractions and analyzed for chemical composition and in vitro dry matter digestibility (DMD). Values for total digestible nutrients (TDN), digestible energy (DE) and metabolizable energy (ME) were subsequently calculated using prediction equations. Dry matter yields of stalk and whole plant increased linearly (p<0.001) and leaf yield increased quadratically (p<0.01) with shoot height, whereas the leaf/stalk ratio decreased linearly (p<0.001). As shoot height increased, there was a linear increase (p<0.001) in leaf DM, ether extract (EE) and neutral detergent fiber (NDF) contents and a quadratic increase (p<0.05) in leaf acid detergent fiber (ADF) and nitrogen free extract (NFE) contents, and stalk and whole plant DM (p<0.001), organic matter (OM, p<0.01 and p<0.05), NDF (p<0.001 and 0.05) and NFE (p<0.05) contents. However, there were decreases in leaf crude protein content (CP, quadratic, p<0.001) and stalk and whole plant EE content (linear, p<0.001), CP (quadratic, p<0.05) and ash (quadratic, p<0.05) contents. Digestibility of DM and TDN, and DE and ME value in leaves were not affected by increasing shoot height, but these measures linearly decreased (p<0.001) in stalk and whole plant. In Experiment 2, the hay had higher DM and CP concentrations, but lower EE concentration than the silage. Essential oil (EO) content in wormwood silage (0.49 g/100 g DM) was higher (p<0.05) than that in wormwood hay (0.32 g/100 g DM). Wormwood hay contained 25 essentail oils (EO) including camphor (10.4 g/100 g), 1-borneol (11.6 g/100 g) and caryophyllene oxide (27.7 g/100 g), and wormwood silage had 26 EO constituents including 3-cyclohexen-1-ol (8.1 g/100 g), trans-caryophyllene (8.6 g/100 g) and ${\gamma}$-selinene (16.8 g/100 g). It is concluded that the most ideal shoot height for harvesting wormwood is 60 cm based on the optimization of DM yield and nutritive value. Wormwood silage had a greater quantity and array of EO than wormwood hay.

• 펄프종이기술
• /
• 제38권3호
• /
• pp.47-60
• /
• 2006

This study was carried out to investigate the sheet formation properties of Morus Hanjis, made of bast and whole stalk pulps by different pulping methods, such as alkali, alkali-peroxide and sulfomethylated pulping. Two species of Morus, M. alba and M. lhou, were used. Effect of morphological properties of pulp stocks on the sheet formation and its gray levels based on optical property were evaluated using an Image analyzer. In addition, the effect of fiber distribution index(FDI) which was calculated from tile data of Confocal laser scanning microscopy(CLSM) on the sheet formation and optical properties of Morus Hanji were also discussed. On the sheet formation, Hanji from whole stalk pulp was superior than that of bast pulp. The more the sheet formation improved, the more paper opacity decreased. In the aspect of Hanji's surface characteristics analyzed by an Image analyzer, the average gray level and its standard deviation of Hanji from the whole stalk pulp were rather lower than those of bast pulp because of better sheet formation of the former. However, high brightness Hanji showed high value of gray level. The sheet formation and paper opacity were increased with the decrease of standard deviation of gray level. From these results, gray level measurement could be used to predict the paper opacity as well as sheet formation. Sheet formation of whole stalk Hanji and its FDI measured by CLSM were higher than those of bast fibers. In conclusion, the sheet formation and opacity of Hanji could be evaluated by standard deviation value of Hanji's gray level using an Image analyzer and by fiber distribution index using CLSM.

• 한국초지조사료학회지
• /
• 제6권1호
• /
• pp.19-23
• /
• 1986

호맥(胡麥)의 생육시기별(生育時期別) 생초(生草) 및 건물소화율(乾物消化率)과 부위별(部位別) 생산량(生産量) 및 이들 시기별(時期別)로 일반성분(一般成分)과 생산량(生産量)을 비교(比較)하기 위하여 수잉기(穗孕期), 출수기(出穗期), 유숙기(乳熟期), 호숙기(糊熟期) 및 황숙기(黃熟期)의 5단계로 나누어 실시(實施)한 시험결과(試驗結果)를 요약(要約)하면 다음과 같다. 1. 생육시기별(生育時期別) 생초수량(生草收量)은 호숙기(糊熟期)가 가장 많았으며(P<0.01), 부위별(部位別)로는 줄기가 가장 많으나 이삭의 양(量)은 황숙기(黃熟期)가 가장 많았다(P<0.01). 2. 부위별(部位別) 비율(比率)은 생육(生育)이 진행(進行)됨에 따라 잎과 줄기는 전체(全體)에 대한 비율(比率)이 현저히 감소했으나, 이삭은 반대현상으로 증가(增加)하였다. 3. 건물량(乾物量)은 생육(生育)이 진행(進行)됨에 따라 증가(增加)하여 황숙기(黃熟期)에 생산량(生産量)이 가장 많았다(P<0.01). 4. 생육(生育)이 진행(進行)됨에 따라 잎, 줄기, 이삭 및 전체(全體)의 조단백질함량(粗蛋白質含量)은 점차로 감소하고 조섬유함량(粗纖維含量)은 반대(反對)로 증가(增加)하였다.

• 한국연초학회지
• /
• 제5권1호
• /
• pp.25-33
• /
• 1983

This study was carried out to investigate the transplanting time, optimum fertilization and harvesting method, chemical contents and physical properties of burley tobacco in paddy field. The results obtained as follows. 1. It is recommendable to transplant after March. 29 to escape the frost injury. By reducing compound fertilizer and whole plant stalk curing, advanced the. last priming date by 5-8 days. 2. Total alkaloid, total nitrogen and phosphorus contents of cured leaf was comparable to those of upland-produce(1 tobacco, but potassium and chloride contents some what high. 3. Filling power and combustibility was also comparable to upland, and filling power was increased by reducing fertilizer and whole plant stalk curing. 4. In the 20o reducing fertilizer-5 Primings volt. the yield was some what decreased, but visual quality and value per 10a were high. 5. The total raw income of tobacco and rice cropping was increased 124~170% than that of rice cropping.

• Journal of Animal Science and Technology
• /
• 제45권6호
• /
• pp.1007-1018
• /
• 2003

평균체중 120kg 내외의 생후 5개월령 한우 27두를 외과적 수술로 거세를 실시한 후 대조구(볏짚 급여구) 10두와 시험구(마늘대 사일리지 급여구) 17두로 나누어 사양시험을 22개월 동안 실시하였다. 농후사료는 대조구에서 육성기, 비육전기 및 비육후기 동안 각각 체중의 1.34, 1.69 및 1.65%를 급여하였고 시험구에서는 1.47, 1.74 및 1.66%를 급여하였다. 조사료원으로 볏짚을 대조구에서 육성기, 비육전기 및 비육후기 동안 각각 체중의 1.37, 0.65 및 0.43%를 급여하였고 시험구에서는 1.38, 0.63 및 0.43%를 급여하였다. 또한 시험구에서는 마늘대 사일리지를 비육전기 및 비육후기 동안 각각 체중의 0.22 및 0.33%를 급여하였다. 본시험의 결과를 요약하면 다음과 같다. 일당증체량은 전기간 동안 대조구와 시험구간에 각각 0.80 및 0.81kg으로 유의적인 차이가 없었다(P〉0.05). 농후사료 섭취량은 대조구와 시험구 각각 5.02kg 및 5.35kg으로 시험구가 약간 높았지만 유의적인 차이는 없었으며(P〉0.05), 조사료 섭취량은 대조구와 시험구 각각 2.58 및 3.58kg이었고, 사료효율은 대조구와 시험구가 각각 9.50 및 11.05로 차이는 없었다. 육량 등급은 마늘대 급여구가 약간 낮았지만 유의적인 차이는 없었고(P〉0.05), 육질 등급은 유의적인 차이는 없었지만 시험구가 약간 높았다. 쇠고기의 전단력은 마늘대 급여구가 볏짚 급여구보다 낮았다. 도체의 아미노산 조성은 필수 아미노산 및 비필수 아미노산 모두 처리구간에 차이가 나타나지 않았고, 도체의 지방산 조성 중 포화 지방산은 대조구가 약간 높았고, 불포화 지방산은 반대로 처리구가 약간 높았다. $\omega$-6과 $\omega$-3 지방산의 비율은 마늘대 급여구가 볏짚 급여구보다 좁아서 마늘대 급여가 불포화지방산중 oleic acid 함량이 볏짚 급여구에 비하여 더 높아서 근육 중의 지방산의 조성을 좋게 하는 것 같다. 두당 소득은 시험구가 대조구보다 22.54% 증가하였다. 이상의 결과들을 종합하여 볼 때 한우 거세우에 마늘대 사일리지를 비육기간 동안 급여하면 거세우의 증체에는 영향을 주지는 않지만, 한우 사육 농가에는 소득의 증대를 가져오므로 마늘대 사일리지를 조사료 공급원으로 급여하는 것이 바람직하다고 사료된다.

• Journal of the Korean Wood Science and Technology
• /
• 제30권2호
• /
• pp.144-150
• /
• 2002

본 실험은 산림자원의 감소 예방과 지구의 환경보존을 위해서 생장이 빠르고 펄프원자재로 활용할 수 있는 비목재 섬유작물을 도입하는 것을 목적으로 하고 있다. 또한 부족한 한지의 원료인 닥나무를 수입하고 있는 실정에서, 국내에서 자생하고 있는 비목재섬유로 한지를 제조함으로써 수입대체 및 원가절감 등 일석이조의 효과를 거둘 수 있다. 이에 불량한 환경조건에서도 생육이 왕성한 어저귀(Abutilon avicennae G.)를 재배하여 그간의 진보된 펄프 제조기술을 적용하여 새로운 제지용 원료로 개발함으로써 부족한 원자재는 물론이거니와 국내 부존자원 이용의 극대화를 꾀하고자 실시하였다. 또한 폐기처리되는 농산물의 이용극대화를 꾀하기 위해 전목펄프화를 실시하였다. 그 결과 어저귀는 생장속도가 빠르고 수확기가 짧으며 집약적 재배 및 관리가 가능하여 단위면적당 최대의 수확량을 올릴 수 있었다. 어저귀 인피부의 섬유장은 2.4 mm로써 목재섬유 중 소나무와, 비목재섬유 중 케나프와 매우 유사한 결과를 보여주었고, 화학성분의 분석결과 어저귀 섬유는 추출성분의 함량이 높고 리그닌이 적은 것이 특징적으로 나타났다. 펄프화와 관련하여 인피부는 150℃에서 48~57%, 전간부는 170℃에서 43~51%의 높은 수율을 나타냈고, 설포메틸 펄프화법의 수율이 더 높게 나타났다. 펄프의 탈리그닌율도 두가지 펄프화법이 모두 90% 이상의 높은 탈리그닌율을 나타내었다.