• Journal of Ecology and Environment
• /
• v.46 no.1
• /
• pp.85-98
• /
• 2022

Background: Korean white pine (Pinus koraiensis) is a major commercial species, and the importance of the oak trees (Quercus spp.) is increasing due to various factors such as environmental and ecological values. However, more information is required to clearly understand the growth characteristics of these species especially regarding thinning intensity. This study was performed to provide the basic information to develop the silvicultural guideline and field manual by analyzing tree and stand characteristics in line with thinning intensity in the Korean white pine plantation and oak-dominated natural deciduous forest. Results: Diameter at breast height (DBH) and volume changes by the thinning intensity in the Korean white pine plantation were significantly different from those in the oak-dominated deciduous natural forest. In particular, DBH distribution in the pine stand appeared that there were more large diameter trees as the thinning intensity was higher. DBH periodic annual increment (PAI) of the pine stand was higher as the thinning intensity was stronger and the growth period was shorter. This trend was similarly shown in the natural deciduous forest, but the amount of PAI was smaller than in pine stand. The volume PAI after thinning was not decreased over time. In each stand type, the PAI tended to be lower as stand density was higher. The volume PAI in the pine stand was significantly higher than that in the oak-dominated natural deciduous forest. Dead trees occurred the most in the unthinned plots of each stand type, and those were higher in the natural deciduous forest. Ingrowth trees were observed only in the natural deciduous forest, and its distribution was the lowest in unthinned plots; Korean white pine as ingrowth occurred the most frequently among many tree species. Conclusions: Different effects of thinning treatment on DBH and volume PAI, mortality, and ingrowth were observed for each stand. With respect to forest growth, Korean white pine plantation was superior to the oak-dominated natural deciduous forest. The results of this study offer fundamental information for the development of silvicultural guidelines for Korean white pine plantations and oak-dominated natural deciduous forests in Korea.

• Journal of Forest and Environmental Science
• /
• v.33 no.4
• /
• pp.315-321
• /
• 2017

This study was carried out to estimate the parameters of stem taper functions, to figure out the best taper model by species, and to compare with previous studies by species, targeting on the stemmed tree samples collected from the Korean red pine (Pinus densiflora), Korean white pine (Pinus koraiensis), and Japanese larch (Larix kaempferi ) stands in Gangwon and North Gyeongsang provinces of South Korea. The seven widely used models were applied in this study, and Muhairwe 1999 model for Korean red pine and Korean white pine and Kozak 2002 model for Japanese larch were evaluated as the best model for each species according to the fit statistics and the predicted stem form comparison. In addition, the predicted diameter was suitably fitted when comparing the previous studies, and the values were more appropriate following stem taper according to neiloid, paraboloid, and cone parts by species. Consequently, the estimation of this study was considered to represent the stem taper well. When comparing stem taper of three species, the diameter was largest in Korean white pine. Overall, the taper models of this study are judged to be useful for estimating stem form and volume computation of Korean red pine, Korean white pine, and Japanese larch.

• Journal of Forest and Environmental Science
• /
• v.33 no.1
• /
• pp.74-77
• /
• 2017

The purpose of this study is to analyze the effect of thinning intensity on the growth of large diameter trees in Korean white pine (Pinus koraiensis S. et Z.) plantation. Eight thinning plots were analyzed by categorizing into heavy thinning, light thinning, no thinning (control) according to thinning intensity. As a result, average DBH increased more in heavy thinning plots than in light thinning or unthinned plots. The number of large trees (DBH>25 cm) were obviously shown the most in heavy thinning plots. It is considered that heavy thinning is needed for the production of the large diameter trees.

• Korean Journal of Plant Resources
• /
• v.19 no.6
• /
• pp.677-679
• /
• 2006

The objectives of this study were to examine the genetic variation of 20-year-old tree height and to estimate heritabilities and genetic gains of Korean white pine. Analysis of variance showed that families and family x block interaction had the significant (p=0.01) effects on tree height. However, family variation appears to be much greater than the variation due to family x block interaction. Individual tree heritability was higher ($h_I^2=0.73$) than family heritability, ($h_F^2=0.83$) therefore, combined selection showed the largest genetic gain (17.76%) in a given equal intensity of selection.

• Journal of Forest and Environmental Science
• /
• v.30 no.1
• /
• pp.56-61
• /
• 2014

Macroscopic and microscopic characteristics of Yellow-hearted pine and Red pine were investigated. Wood color, annual ring width and latewood percentage were observed by the naked eye. Anatomical properties as the structure of three sections and cell dimensions were examined by an optical microscopy. As a result, the color of bark in Yellow-hearted pine was Reddish-grey, and Red pine showed brown or gray. The color of heartwood and sapwood in Yellow-hearted pine was deep-yellow to brown and creamy-white. And the color of heartwood and sapwood in Red pine was light-brown and light-yellow. The annual ring width of Yellow-hearted pine was narrower than that of Red pine, and the latewood percentage of Yellow-hearted pine was a little higher than that of Red pine. There was no significant difference in the anatomical characteristics between Yellow-hearted pine and Red pine.

• Journal of Korean Society of Forest Science
• /
• v.43 no.1
• /
• pp.51-55
• /
• 1979

This study discribes about method of establishing stem taper table of Korean white pine through the preparation of the stem with the sample trees of 280 felled Korean white pine. Stem curves were first classified then induced by form quotient class, stem curve equation according to Behre's stem curve formular. Relied on each calculated stem curve equation tapering degree by form quotient class and established taper table therefore.

• Journal of the Korean Wood Science and Technology
• /
• v.31 no.5
• /
• pp.96-103
• /
• 2003

This study was conducted to evaluate the tensile properties of metal plate connector for the domestic major softwoods, such as Korean red pine, Korean white pine, and Japanese larch. The maximum tensile load of Korean red pine was 3,612kgf in AA type, it was 1.2 and 1.7 times higher load than that of Japanese larch and Korean white pine. In EA type, it was 2,704kgf, and 1.1 and 1.5 times higher than the loads of Japanese larch and Korean white pine. The failure modes of metal plate connector were metal plate withdrawal, plate tensile failure, and wood shear block failure. The failure mode of Korean red pine connector was tensile failure of plate, that is reason of the high tensile load resistance for metal plate connections in Korean red pine. The mechanical properties of metal plate connector could be predicted by the Foschi model parameter. In the initial stage, the Korean red pine connector was stiffer than the other species. The design values for metal plate connector per tooth was 25, 22, and 15kgf for Korean red pine, Japanese larch, and Korean white pine in AA type and 19, 17, and 13kgf in EA type.

• Korean journal of applied entomology
• /
• v.56 no.1
• /
• pp.41-49
• /
• 2017

The community of xylophagous beetles belonging to Cerambycidae, Curculionidae and Scolytinae in Korean white pine, Pinus koraiensis Siebold & Zuccarini, forests was surveyed using Malaise traps in 2007. A total of 1,615 xylophagous beetles were collected, including 184 cerambycids from 15 species, 185 curculionids from 17 species, and 1,246 scolytid beetles from 6 species, of which the dominant species was the ambrosia beetle Xyleborus mutilatus Blandford. Ranked by order of population size, the wood-boring and bark beetle community in Korean white pine showed high dominance by one species of Scolytinae, suggesting the community had low biological diversity. Thinning in Korean white pine forests influenced on the abundance of bark and ambrosia beetles, whose populations in particular stands increased 1 year after thinning, and then decreased the following year.

• Korean journal of applied entomology
• /
• v.48 no.2
• /
• pp.189-195
• /
• 2009

This study was performed to investigate the emergence timing and daily emergence from the different tree species logs (Korean white pine, Pine, and Japanese larch) at Cheongwon, Chungcheongbuk-do from 2006 to 2008. Pine sawyer adults began to emerge on early May (2${\sim}$10th day) and finished on mid-June (4${\sim}$20th day) in the Korean white pine and pine logs. However, pine sawyer adults began to emerge on mid-May (13th day) and finished late May (27th day) in Japanese larch logs, Japanese larch logs shows shorter emergence timing of pine sawyer adult compare to those of other two tree species. Emergence timing shows no difference between males and females. Sex ratios of emerged adult in 2007 were 0.55 from Korean white pine, 0.46 from Pine, and 0.59 from Japanese larch; it shows no difference among tree species. Female and male adults emerged throughout 24 hrs; 22.8% of the total adults emerged from 12${\sim}$14:00 (22.8%) and adults emerged lowest from 06${\sim}$08:00. Of the adults emerged from the logs, 98.9% was univoltine and the rest was biennial which emerged next year.

• Journal of Microbiology
• /
• v.45 no.6
• /
• pp.485-491
• /
• 2007

The effects of biological pretreatment on the Japanese red pine Pinus densiflora, was evaluated after exposure to three white rot fungi Ceriporia lacerata, Stereum hirsutum, and Polyporus brumalis. Change in chemical composition, structural modification, and their susceptibility to enzymatic saccharification in the degraded wood were analyzed. Of the three white rot fungi tested, S. hirsutum selectively degraded the lignin of this sortwood rather than the holocellulose component. After eight weeks of pretreatment with S. hirsutum, total weight loss was 10.7%, while lignin loss was the highest at 14.52% among the tested samples. However, holocellulose loss was lower at 7.81 % compared to those of C. lacerata and P. brumalis. Extracelluar enzymes from S. hirsutum showed higher activity of ligninase and lower activity of cellulase than those from other white rot fungi. Thus, total weight loss and changes in chemical composition of the Japanese red pine was well correlated with the enzyme activities related with lignin- and cellulose degradation in these fungi. Based on the data obtained from analysis of physical characterization of degraded wood by X-ray Diffractometry (XRD) and pore size distribution, S. hirsutum was considered as an effective potential fungus for biological pretreatment. In particular, the increase of available pore size of over 120 nm in pretreated wood powder with S. hirsutum made enzymes accessible for further enzymatic saccharification. When Japanese red pine chips treated with S. hirsutum were enzymatically saccharified using commercial enzymes (Cellulclast 1.5 L and Novozyme 188), sugar yield was greatly increased (21.01 %) compared to non-pre treated control samples, indicating that white rot fungus S. hirsutum provides an effective process in increasing sugar yield from woody biomass.