• Journal of Climate Change Research
• /
• v.2 no.4
• /
• pp.283-295
• /
• 2011

Many actions against climate change have been taken to reduce greenhouse gases (GHGs) emissions at home and abroad. As of 2007, the GHGs emitted from buildings accounted for about 23 % of Korea's total GHGs emission, which is the second largest GHG reduction potential following industry. In this study, we introduced Carbon Zero Building (CZB), which was constructed by the National Institute of Environmental Research to cut down GHGs from buildings in Korea, and evaluated the main applied technologies, the amount of energy load and reduced energy, and economic values for CZB to provide data that could be a basis in the future construction of this kind of carbon-neutral buildings. A total of 66 technologies were applied for this building in order to achieve carbon zero emissions. Applied technologies include 30 energy consumption reduction technologies, 18 energy efficiency technologies, and 5 eco-friendly technologies. Out of total annual energy load ($123.8kWh/m^2$), about 40% of energy load ($49kWh/m^2$) was reduced by using passive technologies such as super insulation and use of high efficiency equipments and the other 60% ($74.8kWh/m^2$) was reduced by using active technologies such as solar voltaic, solar thermal, and geothermal energy. The construction cost of CZB was 1.4 times higher than ordinary buildings. However, if active technologies are excluded, the construction cost is similar to that of ordinary buildings. It was estimated that we could save annually about 102 million won directly from energy saving and about 2.2 million won indirectly from additional saving by the reduction in GHGs and atmospheric pollutants. In terms of carbon, we could reduce 100 ton of $CO_2$ emissions per year. In our Life Cycle Cost (LCC) analysis, the Break Even Point (BEP) for the additional construction cost was estimated to be around 20.6 years.

• Korean Journal of Materials Research
• /
• v.3 no.6
• /
• pp.614-623
• /
• 1993

Electrical characteristics of LiF-$Li_{2}O-B_{2}O_{3}-P_{2}O_5$ glasses with fixed $Li_2O$ content have been investigated by using AC impedance spectroscopy. Part of the total lithium ions present in these glasses contributes to conduction, and the changes in electrical conductivity with composition was inconsistent with the weak electrolyte model. The power law could not be used to determine the hopping ion concentration in these glasses. Both mobile carrier density and mobility have been modified as Li were added in the form of LiF. The formation of $(B-O-P)^-,di^-$, and metaborate group gave additional available sites for Li+ diffusion causing the enhancement of conductivity. The observed maximum conductivity was $2.43 \times 10^{-4}$S/cm at $150^{\circ}C$ at the composition containing 8mol% LiF. The decomposion potential amounted to 5.94V. The Li/glass electrolyte/$TiS_2$ solid-state cell showed open circuit voltage of 3.14V and energy density of 22 Wh/Kg at $150^{\circ}C$.

• Journal of the Korean Geographical Society
• /
• v.32 no.2
• /
• pp.217-228
• /
• 1997

A Study on individual Characteristics and Daily Activities of Housewives in the City of Kwangju. This study examines housewives' daily activities, focusing upon individual characteristics. The data used in this study are based on the fuestionaire survey, asking of personal trip for the weekdays and the weekend. Daily activities are classified into 7 categories and individual characteristics are revealed by age, occupation, a degree of education, number of family, and the residential environment. The results of this study are as follows: 1) The relations between daily activities and individual characteristics are influenced by housewife's occupation. Daily activities of housewives who have jobs are different from those who do not have jobs for a weekday as well as for a weekend. 2) Housewives' daily activities show very busy and vigorous on Saturday. 3) Housewives who are employed are willing to make mutipurpose trips on Saturday. 4) For a weekday, housewives' daily activities are inclined to make one cycle trip in a day, and the more trip cycles are, the more multipurpose trips are made. 5) The relationships between daily activities and individual characteristics show the pattern of WH, WLH, LHLH as it can be grouped.

• Journal of Korean Society of Environmental Engineers
• /
• v.28 no.5
• /
• pp.543-548
• /
• 2006

This paper is to be researched into ozone generation character of Bi-Ti-Si type high dielectric ceramic catalyst discharge tube. And conditions of basic experiment are the outside diameter of discharge tube : 52 mm, the length of discharge tube : 350 mm, the frequence : 900 Hz, the temperature of cooling water : $25^{\circ}C$, quantity of flow : 5, 10, 20 L/min, pressure : 1.2, 1.4, 1.6 atm, and distance of discharge gap : 0.4, 0.6, 0.8 mm. Ozone generation characteristics were measured to consumption power. At quantity of flow : 20 L/min, discharge gap : 0.6 mm, pressure : 1.6, and consumption power : 150 W, Maximum ozone generation efficiency of 175 g/kWh was obtained. And a range of maximum ozone generation efficiency was measured below the flow quantity of 20 L/min at below pressure of 1.6 atm. However, Maximum ozone generation efficiency was measured over the flow quantity of 20 L/min at over pressure of 1.6 atm.

• Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.16 no.6
• /
• pp.130-136
• /
• 2002

A novel ozonizer has been developed using a high frequency surface discharge and a high purity Ti-Si-Al ceramic catalyst as its dielectric component. A cylindrical thin compound ceramic catalyst in reactor is adhered to inside of the film-like outside electrode. And, when experiment condition are oxygen gas temperature of 20 ［$^{\circ}C$］, inner reactor pressure of 1.6 atm 600［Hz］ and flow late of 2［l/min］. the ozonizer can easily produce ozone concentration(50～60［g/㎥］for oxygen) and power efficiency(180［g/kWh］for oxygen) without using a special enrichment means. At 2［l/min］, 20［$^{\circ}C$］, 1.6［atm］, 600［Hz］and 40［W］, the result of simulation to gas temperature of reactor using general code Phoenics, the maximum temperature of reactor was 132［$^{\circ}C$］in reactor. Ant the result electric field simulation of Ti-Si-Al type reactor using general code Flux 2D, maximum electric field was 0.131E.08［V/m］.

• Journal of the Institute of Electronics Engineers of Korea TC
• /
• v.43 no.2 s.344
• /
• pp.49-55
• /
• 2006

This paper describe the most advanced database management system for the mobile number portability(MNP) in the world The database management system can process the procedure of porting_out and porting_in in 30 minutes and it is the shortest time in the world. The MNP DB management system consists of two functional blocks, one is for the call processing system and the other is for the management of subscriber of MNP. The hardware and processing algorithm are presented in this paper. The DB for call processing is located at each mobile operator and be called local number portability database (L-NPDB). The DB for the management of subscriber of MNP consist of L-NPDB and master database which is located at the Korea telecommunications operators association(KTOA). The hardware database system for MNP consists of the interconnection system of master-NPCDB (NP customer database, M-NPCDB), local-NPCDB, M-NPDB and L-NPDB. The master database is interconnected to the local database through dedicated line and can process any MNP service in real time. The presented MNP structure in this paper has been implemented in Korea and became the most effective and advanced DB management system for MNP in the world.

• Proceedings of the KIEE Conference
• /
• 2000.07c
• /
• pp.2141-2143
• /
• 2000

In this paper, high concentration yield multi-discharge type ozonizer (MDO) of new discharge type using superposed silent discharge was designed and manufactured, MDO can be consisted with 3 kind of multi discharge type ozonizer (MDO) in accordance with power supply method that supplying power, which has 180[$^{\circ}$] phase difference, to 3 electrodes and double gap. At the moment, discharge characteristics and ozone generation characteristics of each MDO were investigated in accordance with quantity of supplied gas, the number of MDO, and the shapes of each MDO. In result, ozone generation characteristics of 17185[ppm] and 783[g/kWh] were obtained, and when ozone of 17185 [ppm] was in contact with dyeing water waste, decolorization characteristics was excellent, so it confirmed that MDO could be used as water environment improvement facility.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2022.05a
• /
• pp.31-31
• /
• 2022

기후변화, 물 부족, 인구 증가와 도시화로 인한 물 수요 증가, 수질 악화, 노후화된 인프라와 같은 세계적인 물문제의 증가로 인해, 도시 물순환 시스템 관리는 더 큰 어려움을 겪고 있다. 취수, 도·송수, 정수처리, 배·급수, 용수 사용, 하수 집수, 하수 처리, 재이용 및 배출 과정을 포함하는 도시 물순환 시스템의 과정은 매우 에너지 집약적인 활동이며, 이와 같은 에너지 소비는 탄소 배출과 양의 직접적인 상관관계가 있다. 따라서 자원 관리 및 데이터 관리를 최적화하기 위해 넥서스 관점의 접근법이 도시 물순환 시스템에 점차적으로 도입되고 있는 추세이다. 도시 물순환 시스템 넥서스에서는 일반적으로 에너지 인텐시티로 표현되는 물을 위한 에너지를 이해하는 것이 중요하다. 에너지 인텐시티의 차이는 기후(연평균 강수량, 단기 기후 변동성, 기후패턴 등), 지리적 특징(표고차, 평지비, 위치 등), 시스템 특성(총급수량, 인구, 인구밀도, 관로 연장 등) 및 운영관리 효율(수압, 누수율, 에너지 효율 등)과 밀접한 관계가 있다. 그리고 도시 물순환 시스템에서 에너지 관리를 증진시킨 방안은 유지관리 효율 개선(물·에너지 관리전략, 물손실 관리, 수요 관리 및 수요 대응 등), 신기술 도입, 그리고 에너지 회수로 나누어진다. 본 연구에서는 기존 문헌의 자료를 분석하여 도시 물순환 시스템의 각 공정별 에너지 인텐시티를 분석하였으며, 시스템 다이나믹스를 적용하여 다양한 도시 여건(인구, lpcd, 누수율, 취수원, 에너지 인텐시티)에서 외부영향(기후변화, 도시화)과 운영효율 변동(운영효율 향상, 신시술 도입)에 따른 도시 물순환 시스템 내 자원 사용 및 이동을 분석하였다. 에너지 인텐시티는 전체 도시 물순환 시스템, 상수 시스템, 하수시스템에서 각각 2.334 kWh/m³, 1.029 kWh/m³, 1.024 kWh/m³를 나타내었으며, 용수사용, 담수화, 재이용 과정에서는 매우 높은 값이 나타났다. 에너지 인틴시티의 값은 외부 영향에 크게 좌우되는 것으로 분석되었으며, 운영효율의 변동에 따라서 물 및 에너지 사용량은 변화하였지만 에너지 인텐시티의 변동은 크지 않았다. 이에 따라 도시 물순환 시스템을 넥서스 관점에서 관리하기 위해서는 에너지 인텐시티 이외에 물 및 에너지 사용량, 유수수량 관점 에너지 인텐시티, 사용수량 관점 에너지 인텐시티를 종합적으로 고려하는 것이 필요하다.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.16 no.7
• /
• pp.634-640
• /
• 2003

This paper is to be researched into ozone generation character of Bi-Ti-Si type high dielectric yield ceramic catalyst discharge tube. And conditions of basic experiment are the outside diameter of discharge tube : 52 mm, the length of discharge tube : 350 mm, the frequence : 900 Hz, the temperature of cooling water : 25 $^{\circ}C$, quantity of flow : 5, 10, 20 l/min, pressure : 1.2, 1.4, 1.6 atm, and distance of discharge gap : 0.4, 0.6, 0.8 mm. Ozone generation characteristics were measured to consumption power. At quantity of flow : 20 l/min, discharge gap : 0.6 mm, pressure : 1.6, and consumption power : 150 W, Maximum ozone generation efficiency of 175 g/kWh was obtained. Maximum ozone generation efficiency was measured below the flow quantity of 20 l/min at below pressure of 1.6 atm. However, Maximum ozone generation efficiency was measured over the flow quantity of 20 l/min at over pressure of 1.6 atm.

• Proceedings of the KIEE Conference
• /
• 2002.11a
• /
• pp.206-208
• /
• 2002

A novel ozonizer has been developed using a high frequence surface discharge and a high purity ceramic as its dielectric component. And A cylindrical thin compound ceramic catalyst in reactor is adhered to inside of the film-like outside electrode. An ac exciting voltage with frequency to 0.6 kHz from 1.0 kHz and $4{\sim}6$ kV of peak-to-peak is applied between the electrodes to produce a stable high-frequency silent discharge for generation of ozone. A substantial reduction of the exciting voltage is also enabled by using a thin ceramic. As a result, the ozonizer can easily produce ozone concentration(50 $g/m^3$ for oxygen) and power efficiency(240 g/kWh for oxygen) without using a special enrichment means.